🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

1 total messages Started by klikacz Sun, 11 Apr 2004 17:15
[fbsd 5.1] ftp-smb-transfer po lanie 3 razy mniejszy niz na 4.8
#585
Author: klikacz
Date: Sun, 11 Apr 2004 17:15
54 lines
3341 bytes
Witam, przesiadlem sie ostatnio z 4.8 na 5.1 (by miec altq/pf), i teraz mam
taki dziwny problem taka sama konfiguracja sprzetowa ten sam ftp (pure-ftpd,
proftpd) ta sama samba, a transfery po lanie 100Mbit, 3 razy mniejszy niz na
4.8. Nie limituje ruchu po lanie, nawet przy wylaczonym pf'ie sytuacja taka
sama max 1,5 MB/s z serwera i 2,5 MB/s do serwera, podczas gdy na 4.8 mialem
~4MB/s in/out. Jedyna rzecz ktora sie zmienila to rozklad wielkosc partycji
/usr z 10 GB zmienila sie w 30 GB. Jedyne co udalo mi sie wygoglowac to, ze
na 5.1 cos zmienili z driverami do realteka, prawda to ??,

Prosze o pomoc, z gory dziekuje

podczas sciagania
#netstat -m
mbuf usage:
        GEN cache:      0/0 (in use/in pool)
        CPU #0 cache:   1218/1344 (in use/in pool)
        Total:          1218/1344 (in use/in pool)
        Mbuf cache high watermark: 512
        Maximum possible: 16384
        Allocated mbuf types:
          1218 mbufs allocated to data
        8% of mbuf map consumed
mbuf cluster usage:
        GEN cache:      0/0 (in use/in pool)
        CPU #0 cache:   3/80 (in use/in pool)
        Total:          3/80 (in use/in pool)
        Cluster cache high watermark: 128
        Maximum possible: 8192
        0% of cluster map consumed
496 KBytes of wired memory reserved (62% in use)
0 requests for memory denied
0 requests for memory delayed
0 calls to protocol drain routines

#ifconfig
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
        inet6 fe80::2c0:26ff:fe2d:cff3%rl0 prefixlen 64 scopeid 0x1
        ether 00:c0:26:2d:cf:f3
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet public_ip netmask 0xfffffffc broadcast public_broadcast
        inet6 fe80::2c0:26ff:fe2d:b13d%rl1 prefixlen 64 scopeid 0x2
        ether 00:c0:26:2d:b1:3d
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
        inet 127.0.0.1 netmask 0xff000000
pflog0: flags=0<> mtu 33208
pfsync0: flags=0<> mtu 1896
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads