🚀 go-pugleaf

Witam, przesiadlem sie ostatnio z 4.8 na 5.1 (by miec altq/pf), i teraz mam
taki dziwny problem taka sama konfiguracja sprzetowa ten sam ftp (pure-ftpd,
proftpd) ta sama samba, a transfery po lanie 100Mbit, 3 razy mniejszy niz na
4.8. Nie limituje ruchu po lanie, nawet przy wylaczonym pf'ie sytuacja taka
sama max 1,5 MB/s z serwera i 2,5 MB/s do serwera, podczas gdy na 4.8 mialem
~4MB/s in/out. Jedyna rzecz ktora sie zmienila to rozklad wielkosc partycji
/usr z 10 GB zmienila sie w 30 GB. Jedyne co udalo mi sie wygoglowac to, ze
na 5.1 cos zmienili z driverami do realteka, prawda to ??,

Prosze o pomoc, z gory dziekuje

podczas sciagania
#netstat -m
mbuf usage:
        GEN cache:      0/0 (in use/in pool)
        CPU #0 cache:   1218/1344 (in use/in pool)
        Total:          1218/1344 (in use/in pool)
        Mbuf cache high watermark: 512
        Maximum possible: 16384
        Allocated mbuf types:
          1218 mbufs allocated to data
        8% of mbuf map consumed
mbuf cluster usage:
        GEN cache:      0/0 (in use/in pool)
        CPU #0 cache:   3/80 (in use/in pool)
        Total:          3/80 (in use/in pool)
        Cluster cache high watermark: 128
        Maximum possible: 8192
        0% of cluster map consumed
496 KBytes of wired memory reserved (62% in use)
0 requests for memory denied
0 requests for memory delayed
0 calls to protocol drain routines

#ifconfig
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
        inet6 fe80::2c0:26ff:fe2d:cff3%rl0 prefixlen 64 scopeid 0x1
        ether 00:c0:26:2d:cf:f3
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet public_ip netmask 0xfffffffc broadcast public_broadcast
        inet6 fe80::2c0:26ff:fe2d:b13d%rl1 prefixlen 64 scopeid 0x2
        ether 00:c0:26:2d:b1:3d
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
        inet 127.0.0.1 netmask 0xff000000
pflog0: flags=0<> mtu 33208
pfsync0: flags=0<> mtu 1896