Thread View: alt.pl.wirelesslan
3 messages
3 total messages
Started by Krzysztof J.
Sat, 27 Oct 2007 09:23
Freeradius - problem z autoryzacją.
Author: Krzysztof J.
Date: Sat, 27 Oct 2007 09:23
Date: Sat, 27 Oct 2007 09:23
686 lines
37575 bytes
37575 bytes
Witam.
Skonfigurowałem freeradius-a zgodnie z opisem na stronie:
http://www.linux.com/base/ldp/howto/8021X-HOWTO/freeradius.html
i teraz mam problem z podłączeniem się laptopem do AP: Freeradius-a
uruchamiam komendą: radiusd -X, log przedstawiam poniżej. Proszę o
wszelkie sugestie.
root@p4:/usr/local/freeradius/etc/raddb#
/usr/local/freeradius/sbin/radiusd -X
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /usr/local/freeradius/etc/raddb/proxy.conf
Config: including file: /usr/local/freeradius/etc/raddb/clients.conf
Config: including file: /usr/local/freeradius/etc/raddb/snmp.conf
Config: including file: /usr/local/freeradius/etc/raddb/eap.conf
Config: including file: /usr/local/freeradius/etc/raddb/sql.conf
main: prefix = "/usr/local/freeradius"
main: localstatedir = "/usr/local/freeradius/var"
main: logdir = "/usr/local/freeradius/var/log/radius"
main: libdir = "/usr/local/freeradius/lib"
main: radacctdir = "/usr/local/freeradius/var/log/radius/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/usr/local/freeradius/var/log/radius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/usr/local/freeradius/var/run/radiusd/radiusd.pid"
main: user = "(null)"
main: group = "(null)"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/local/freeradius/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = no
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/local/freeradius/lib
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded eap
eap: default_eap_type = "peap"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
tls: rsa_key_exchange = no
tls: dh_key_exchange = yes
tls: rsa_key_length = 512
tls: dh_key_length = 512
tls: verify_depth = 0
tls: CA_path = "(null)"
tls: pem_file_type = yes
tls: private_key_file =
"/usr/local/freeradius/etc/raddb/certs/cert-srv.pem"
tls: certificate_file =
"/usr/local/freeradius/etc/raddb/certs/cert-srv.pem"
tls: CA_file = "/usr/local/freeradius/etc/raddb/certs/demoCA/cacert.pem"
tls: private_key_password = "whatever"
tls: dh_file = "/usr/local/freeradius/etc/raddb/certs/dh"
tls: random_file = "/usr/local/freeradius/etc/raddb/certs/random"
tls: fragment_size = 1024
tls: include_length = yes
tls: check_crl = no
tls: check_cert_cn = "(null)"
tls: cipher_list = "(null)"
tls: check_cert_issuer = "(null)"
rlm_eap_tls: Loading the certificate file as a chain
WARNING: rlm_eap_tls: Unable to set DH parameters. DH cipher suites may
not work!
WARNING: Fix this by running the OpenSSL command listed in eap.conf
rlm_eap: Loaded and initialized type tls
peap: default_eap_type = "mschapv2"
peap: copy_request_to_tunnel = no
peap: use_tunneled_reply = no
peap: proxy_tunneled_request_as_eap = yes
rlm_eap: Loaded and initialized type peap
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/usr/local/freeradius/etc/raddb/huntgroups"
preprocess: hints = "/usr/local/freeradius/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = yes
mschap: require_strong = yes
mschap: with_ntdomain_hack = no
mschap: passwd = "(null)"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
files: usersfile = "/usr/local/freeradius/etc/raddb/users"
files: acctusersfile = "/usr/local/freeradius/etc/raddb/acct_users"
files: preproxy_usersfile =
"/usr/local/freeradius/etc/raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile =
"/usr/local/freeradius/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/usr/local/freeradius/var/log/radius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.
Po wpisaniu loginu i hasła:
rad_recv: Access-Request packet from host 192.168.10.230:2048, id=52,
length=161
User-Name = "ja"
NAS-IP-Address = 192.168.10.230
NAS-Port = 0
Called-Station-Id = "0090cc9f6223"
Calling-Station-Id = "000e35d68866"
NAS-Identifier = "Realtek Access Point. 8181"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Service-Type = Framed-User
Connect-Info = "CONNECT 11Mbps 802.11b"
EAP-Message = 0x02000007016a61
Message-Authenticator = 0x9b2d7116e2c3484b81c149ad95b05d0a
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "ja", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: EAP packet type response id 0 length 7
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 0
users: Matched entry ja at line 127
modcall[authorize]: module "files" returns ok for request 0
modcall: leaving group authorize (returns updated) for request 0
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
rlm_eap: EAP Identity
rlm_eap: processing type tls
rlm_eap_tls: Initiate
rlm_eap_tls: Start returned 1
modcall[authenticate]: module "eap" returns handled for request 0
modcall: leaving group authenticate (returns handled) for request 0
Sending Access-Challenge of id 52 to 192.168.10.230 port 2048
EAP-Message = 0x010100061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x192e9162be421cf1e92324da57f7a9e9
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.10.230:2048, id=53,
length=246
User-Name = "ja"
NAS-IP-Address = 192.168.10.230
NAS-Port = 0
Called-Station-Id = "0090cc9f6223"
Calling-Station-Id = "000e35d68866"
NAS-Identifier = "Realtek Access Point. 8181"
NAS-Port-Type = Wireless-802.11
Service-Type = Framed-User
Connect-Info = "CONNECT 11Mbps 802.11b"
EAP-Message =
0x0201005019800000004616030100410100003d030147223f0e49e9d9e4ef984dda10ac15192864eb27c70f3771035f50d3805ce79300001600040005000a000900640062000300060013001200630100
State = 0x192e9162be421cf1e92324da57f7a9e9
Message-Authenticator = 0x26ddf526473ecd19d513bb7ab148d95b
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
modcall[authorize]: module "preprocess" returns ok for request 1
modcall[authorize]: module "mschap" returns noop for request 1
rlm_realm: No '@' in User-Name = "ja", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 1
rlm_eap: EAP packet type response id 1 length 80
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 1
users: Matched entry ja at line 127
modcall[authorize]: module "files" returns ok for request 1
modcall: leaving group authorize (returns updated) for request 1
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Length Included
eaptls_verify returned 11
(other): before/accept initialization
TLS_accept: before/accept initialization
rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello
TLS_accept: SSLv3 read client hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello
TLS_accept: SSLv3 write server hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 0694], Certificate
TLS_accept: SSLv3 write certificate A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
TLS_accept: SSLv3 write server done A
TLS_accept: SSLv3 flush data
TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 1
modcall: leaving group authenticate (returns handled) for request 1
Sending Access-Challenge of id 53 to 192.168.10.230 port 2048
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message = 0x652e636f6d301e170d3034303132353133323630375a
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x0d810cf0e72098b750c2224155ac9f63
Finished request 1
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.10.230:2048, id=54,
length=172
User-Name = "ja"
NAS-IP-Address = 192.168.10.230
NAS-Port = 0
Called-Station-Id = "0090cc9f6223"
Calling-Station-Id = "000e35d68866"
NAS-Identifier = "Realtek Access Point. 8181"
NAS-Port-Type = Wireless-802.11
Service-Type = Framed-User
Connect-Info = "CONNECT 11Mbps 802.11b"
EAP-Message = 0x020200061900
State = 0x0d810cf0e72098b750c2224155ac9f63
Message-Authenticator = 0xa584d204c03dba07995fda3c5bf267aa
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 2
modcall[authorize]: module "preprocess" returns ok for request 2
modcall[authorize]: module "mschap" returns noop for request 2
rlm_realm: No '@' in User-Name = "ja", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 2
rlm_eap: EAP packet type response id 2 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 2
users: Matched entry ja at line 127
modcall[authorize]: module "files" returns ok for request 2
modcall: leaving group authorize (returns updated) for request 2
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 2
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
rlm_eap_tls: ack handshake fragment handler
eaptls_verify returned 1
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 2
modcall: leaving group authenticate (returns handled) for request 2
Sending Access-Challenge of id 54 to 192.168.10.230 port 2048
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9306e7c3181dc3f01643ea0c429870d7
Finished request 2
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.10.230:2048, id=55,
length=172
User-Name = "ja"
NAS-IP-Address = 192.168.10.230
NAS-Port = 0
Called-Station-Id = "0090cc9f6223"
Calling-Station-Id = "000e35d68866"
NAS-Identifier = "Realtek Access Point. 8181"
NAS-Port-Type = Wireless-802.11
Service-Type = Framed-User
Connect-Info = "CONNECT 11Mbps 802.11b"
EAP-Message = 0x020300061900
State = 0x9306e7c3181dc3f01643ea0c429870d7
Message-Authenticator = 0x58fd5fabe4006070f3d4de7c9a7e99d0
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 3
modcall[authorize]: module "preprocess" returns ok for request 3
modcall[authorize]: module "mschap" returns noop for request 3
rlm_realm: No '@' in User-Name = "ja", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 3
rlm_eap: EAP packet type response id 3 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 3
users: Matched entry ja at line 127
modcall[authorize]: module "files" returns ok for request 3
modcall: leaving group authorize (returns updated) for request 3
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 3
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
rlm_eap_tls: ack handshake fragment handler
eaptls_verify returned 1
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 3
modcall: leaving group authenticate (returns handled) for request 3
Sending Access-Challenge of id 55 to 192.168.10.230 port 2048
EAP-Message = 0x010400061900
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x08a5886eb64f1111b22ffa2a254284cf
Finished request 3
Going to the next request
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 52 with timestamp 47223f0f
Cleaning up request 1 ID 53 with timestamp 47223f0f
Cleaning up request 2 ID 54 with timestamp 47223f0f
Cleaning up request 3 ID 55 with timestamp 47223f0f
Nothing to do. Sleeping until we see a request.
rad_recv: Access-Request packet from host 192.168.10.230:2048, id=56,
length=161
User-Name = "ja"
NAS-IP-Address = 192.168.10.230
NAS-Port = 0
Called-Station-Id = "0090cc9f6223"
Calling-Station-Id = "000e35d68866"
NAS-Identifier = "Realtek Access Point. 8181"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Service-Type = Framed-User
Connect-Info = "CONNECT 11Mbps 802.11b"
EAP-Message = 0x02000007016a61
Message-Authenticator = 0xb0a7bf76afc8caba20b05ce7ef1cbc40
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 4
modcall[authorize]: module "preprocess" returns ok for request 4
modcall[authorize]: module "mschap" returns noop for request 4
rlm_realm: No '@' in User-Name = "ja", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 4
rlm_eap: EAP packet type response id 0 length 7
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 4
users: Matched entry ja at line 127
modcall[authorize]: module "files" returns ok for request 4
modcall: leaving group authorize (returns updated) for request 4
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 4
rlm_eap: EAP Identity
rlm_eap: processing type tls
rlm_eap_tls: Initiate
rlm_eap_tls: Start returned 1
modcall[authenticate]: module "eap" returns handled for request 4
modcall: leaving group authenticate (returns handled) for request 4
Sending Access-Challenge of id 56 to 192.168.10.230 port 2048
EAP-Message = 0x010100061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xfd89ab8ad1784c31d1ba45d43ab28fb8
Finished request 4
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.10.230:2048, id=57,
length=246
User-Name = "ja"
NAS-IP-Address = 192.168.10.230
NAS-Port = 0
Called-Station-Id = "0090cc9f6223"
Calling-Station-Id = "000e35d68866"
NAS-Identifier = "Realtek Access Point. 8181"
NAS-Port-Type = Wireless-802.11
Service-Type = Framed-User
Connect-Info = "CONNECT 11Mbps 802.11b"
EAP-Message =
0x0201005019800000004616030100410100003d030147223f1ec0847c6b1664ae5b7d9058202ec99d4c049880b1c21bb4837e6dde9000001600040005000a000900640062000300060013001200630100
State = 0xfd89ab8ad1784c31d1ba45d43ab28fb8
Message-Authenticator = 0x8b428de6633435057b4b93ab0158a8ef
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 5
modcall[authorize]: module "preprocess" returns ok for request 5
modcall[authorize]: module "mschap" returns noop for request 5
rlm_realm: No '@' in User-Name = "ja", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 5
rlm_eap: EAP packet type response id 1 length 80
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 5
users: Matched entry ja at line 127
modcall[authorize]: module "files" returns ok for request 5
modcall: leaving group authorize (returns updated) for request 5
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 5
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Length Included
eaptls_verify returned 11
(other): before/accept initialization
TLS_accept: before/accept initialization
rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello
TLS_accept: SSLv3 read client hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello
TLS_accept: SSLv3 write server hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 0694], Certificate
TLS_accept: SSLv3 write certificate A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
TLS_accept: SSLv3 write server done A
TLS_accept: SSLv3 flush data
TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 5
modcall: leaving group authenticate (returns handled) for request 5
Sending Access-Challenge of id 57 to 192.168.10.230 port 2048
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message = 0x652e636f6d301e170d3034303132353133323630375a
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x69b0e00558cc97defbc9f2847e8d0b58
Finished request 5
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.10.230:2048, id=58,
length=172
User-Name = "ja"
NAS-IP-Address = 192.168.10.230
NAS-Port = 0
Called-Station-Id = "0090cc9f6223"
Calling-Station-Id = "000e35d68866"
NAS-Identifier = "Realtek Access Point. 8181"
NAS-Port-Type = Wireless-802.11
Service-Type = Framed-User
Connect-Info = "CONNECT 11Mbps 802.11b"
EAP-Message = 0x020200061900
State = 0x69b0e00558cc97defbc9f2847e8d0b58
Message-Authenticator = 0xac1bc76027c137ddb2ae0999dd1eb94a
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 6
modcall[authorize]: module "preprocess" returns ok for request 6
modcall[authorize]: module "mschap" returns noop for request 6
rlm_realm: No '@' in User-Name = "ja", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 6
rlm_eap: EAP packet type response id 2 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 6
users: Matched entry ja at line 127
modcall[authorize]: module "files" returns ok for request 6
modcall: leaving group authorize (returns updated) for request 6
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 6
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
rlm_eap_tls: ack handshake fragment handler
eaptls_verify returned 1
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 6
modcall: leaving group authenticate (returns handled) for request 6
Sending Access-Challenge of id 58 to 192.168.10.230 port 2048
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x6e6df1bccadb388f10edf7a88bcdff31
Finished request 6
Going to the next request
--- Walking the entire request list ---
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 192.168.10.230:2048, id=59,
length=172
User-Name = "ja"
NAS-IP-Address = 192.168.10.230
NAS-Port = 0
Called-Station-Id = "0090cc9f6223"
Calling-Station-Id = "000e35d68866"
NAS-Identifier = "Realtek Access Point. 8181"
NAS-Port-Type = Wireless-802.11
Service-Type = Framed-User
Connect-Info = "CONNECT 11Mbps 802.11b"
EAP-Message = 0x020300061900
State = 0x6e6df1bccadb388f10edf7a88bcdff31
Message-Authenticator = 0x3cbdd59c59f8fb8d88b7689ba87fdf2f
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 7
modcall[authorize]: module "preprocess" returns ok for request 7
modcall[authorize]: module "mschap" returns noop for request 7
rlm_realm: No '@' in User-Name = "ja", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 7
rlm_eap: EAP packet type response id 3 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 7
users: Matched entry ja at line 127
modcall[authorize]: module "files" returns ok for request 7
modcall: leaving group authorize (returns updated) for request 7
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 7
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
rlm_eap_tls: ack handshake fragment handler
eaptls_verify returned 1
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 7
modcall: leaving group authenticate (returns handled) for request 7
Sending Access-Challenge of id 59 to 192.168.10.230 port 2048
EAP-Message = 0x010400061900
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x24010e59f93e5cbd32a74e1b66114e06
Finished request 7
Going to the next request
Waking up in 5 seconds...
--- Walking the entire request list ---
Cleaning up request 4 ID 56 with timestamp 47223f1e
Cleaning up request 5 ID 57 with timestamp 47223f1e
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 6 ID 58 with timestamp 47223f1f
Cleaning up request 7 ID 59 with timestamp 47223f1f
Nothing to do. Sleeping until we see a request.
rad_recv: Access-Request packet from host 192.168.10.230:2048, id=60,
length=179
User-Name = "ja"
NAS-IP-Address = 192.168.10.230
NAS-Port = 0
Called-Station-Id = "0090cc9f6223"
Calling-Station-Id = "000e35d68866"
NAS-Identifier = "Realtek Access Point. 8181"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Service-Type = Framed-User
Connect-Info = "CONNECT 11Mbps 802.11b"
EAP-Message = 0x02050007016a61
State = 0x24010e59f93e5cbd32a74e1b66114e06
Message-Authenticator = 0xbc96b724b42b9ec2d4fbbfce1f51d122
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 8
modcall[authorize]: module "preprocess" returns ok for request 8
modcall[authorize]: module "mschap" returns noop for request 8
rlm_realm: No '@' in User-Name = "ja", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 8
rlm_eap: EAP packet type response id 5 length 7
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 8
users: Matched entry ja at line 127
modcall[authorize]: module "files" returns ok for request 8
modcall: leaving group authorize (returns updated) for request 8
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 8
rlm_eap: EAP Identity
rlm_eap: processing type tls
rlm_eap_tls: Initiate
rlm_eap_tls: Start returned 1
modcall[authenticate]: module "eap" returns handled for request 8
modcall: leaving group authenticate (returns handled) for request 8
Sending Access-Challenge of id 60 to 192.168.10.230 port 2048
EAP-Message = 0x010600061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xe8ee8282562fecad9ad33c7f9dc4aed2
Finished request 8
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 8 ID 60 with timestamp 47223f2e
Nothing to do. Sleeping until we see a request.
W tym momencie połącznie się kończy.
Pozdr.
Krzysztof J.
Re: Freeradius - problem z autoryzacją.
Author: Krzysztof J.
Date: Sun, 28 Oct 2007 03:10
Date: Sun, 28 Oct 2007 03:10
2 lines
1017 bytes
1017 bytes
No i Krzysztof J. juz ma dubla A taki bylem dumny z tej ksywy
Re: Freeradius - problem z autoryzacją.
Author: Krzysztof J.
Date: Sun, 28 Oct 2007 10:04
Date: Sun, 28 Oct 2007 10:04
7 lines
1050 bytes
1050 bytes
Użytkownik Krzysztof J. napisał: > No i Krzysztof J. juz ma dubla > A taki bylem dumny z tej ksywy Żeby jeszcze się problem zdublował by było git. Krzysztof J.
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads