🚀 go-pugleaf

Witam.
Skonfigurowałem freeradius-a zgodnie z opisem na stronie:

http://www.linux.com/base/ldp/howto/8021X-HOWTO/freeradius.html

i teraz mam problem z podłączeniem się laptopem do AP: Freeradius-a 
uruchamiam komendą: radiusd -X, log przedstawiam poniżej. Proszę o 
wszelkie sugestie.



root@p4:/usr/local/freeradius/etc/raddb# 
/usr/local/freeradius/sbin/radiusd -X
Starting - reading configuration files ...
reread_config:  reading radiusd.conf
Config:   including file: /usr/local/freeradius/etc/raddb/proxy.conf
Config:   including file: /usr/local/freeradius/etc/raddb/clients.conf
Config:   including file: /usr/local/freeradius/etc/raddb/snmp.conf
Config:   including file: /usr/local/freeradius/etc/raddb/eap.conf
Config:   including file: /usr/local/freeradius/etc/raddb/sql.conf
  main: prefix = "/usr/local/freeradius"
  main: localstatedir = "/usr/local/freeradius/var"
  main: logdir = "/usr/local/freeradius/var/log/radius"
  main: libdir = "/usr/local/freeradius/lib"
  main: radacctdir = "/usr/local/freeradius/var/log/radius/radacct"
  main: hostname_lookups = no
  main: max_request_time = 30
  main: cleanup_delay = 5
  main: max_requests = 1024
  main: delete_blocked_requests = 0
  main: port = 0
  main: allow_core_dumps = no
  main: log_stripped_names = no
  main: log_file = "/usr/local/freeradius/var/log/radius/radius.log"
  main: log_auth = no
  main: log_auth_badpass = no
  main: log_auth_goodpass = no
  main: pidfile = "/usr/local/freeradius/var/run/radiusd/radiusd.pid"
  main: user = "(null)"
  main: group = "(null)"
  main: usercollide = no
  main: lower_user = "no"
  main: lower_pass = "no"
  main: nospace_user = "no"
  main: nospace_pass = "no"
  main: checkrad = "/usr/local/freeradius/sbin/checkrad"
  main: proxy_requests = yes
  proxy: retry_delay = 5
  proxy: retry_count = 3
  proxy: synchronous = no
  proxy: default_fallback = yes
  proxy: dead_time = 120
  proxy: post_proxy_authorize = no
  proxy: wake_all_if_all_dead = no
  security: max_attributes = 200
  security: reject_delay = 1
  security: status_server = no
  main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
Using deprecated naslist file.  Support for this will go away soon.
read_config_files:  reading clients
read_config_files:  reading realms
radiusd:  entering modules setup
Module: Library search path is /usr/local/freeradius/lib
Module: Loaded exec
  exec: wait = yes
  exec: program = "(null)"
  exec: input_pairs = "request"
  exec: output_pairs = "(null)"
  exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded eap
  eap: default_eap_type = "peap"
  eap: timer_expire = 60
  eap: ignore_unknown_eap_types = no
  eap: cisco_accounting_username_bug = no
  tls: rsa_key_exchange = no
  tls: dh_key_exchange = yes
  tls: rsa_key_length = 512
  tls: dh_key_length = 512
  tls: verify_depth = 0
  tls: CA_path = "(null)"
  tls: pem_file_type = yes
  tls: private_key_file = 
"/usr/local/freeradius/etc/raddb/certs/cert-srv.pem"
  tls: certificate_file = 
"/usr/local/freeradius/etc/raddb/certs/cert-srv.pem"
  tls: CA_file = "/usr/local/freeradius/etc/raddb/certs/demoCA/cacert.pem"
  tls: private_key_password = "whatever"
  tls: dh_file = "/usr/local/freeradius/etc/raddb/certs/dh"
  tls: random_file = "/usr/local/freeradius/etc/raddb/certs/random"
  tls: fragment_size = 1024
  tls: include_length = yes
  tls: check_crl = no
  tls: check_cert_cn = "(null)"
  tls: cipher_list = "(null)"
  tls: check_cert_issuer = "(null)"
rlm_eap_tls: Loading the certificate file as a chain
WARNING: rlm_eap_tls: Unable to set DH parameters.  DH cipher suites may 
not work!
WARNING: Fix this by running the OpenSSL command listed in eap.conf
rlm_eap: Loaded and initialized type tls
  peap: default_eap_type = "mschapv2"
  peap: copy_request_to_tunnel = no
  peap: use_tunneled_reply = no
  peap: proxy_tunneled_request_as_eap = yes
rlm_eap: Loaded and initialized type peap
  mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
  preprocess: huntgroups = "/usr/local/freeradius/etc/raddb/huntgroups"
  preprocess: hints = "/usr/local/freeradius/etc/raddb/hints"
  preprocess: with_ascend_hack = no
  preprocess: ascend_channels_per_line = 23
  preprocess: with_ntdomain_hack = no
  preprocess: with_specialix_jetstream_hack = no
  preprocess: with_cisco_vsa_hack = no
  preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded MS-CHAP
  mschap: use_mppe = yes
  mschap: require_encryption = yes
  mschap: require_strong = yes
  mschap: with_ntdomain_hack = no
  mschap: passwd = "(null)"
  mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded realm
  realm: format = "suffix"
  realm: delimiter = "@"
  realm: ignore_default = no
  realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
  files: usersfile = "/usr/local/freeradius/etc/raddb/users"
  files: acctusersfile = "/usr/local/freeradius/etc/raddb/acct_users"
  files: preproxy_usersfile = 
"/usr/local/freeradius/etc/raddb/preproxy_users"
  files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
  acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, 
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
  detail: detailfile = 
"/usr/local/freeradius/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
  detail: detailperm = 384
  detail: dirperm = 493
  detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
  radutmp: filename = "/usr/local/freeradius/var/log/radius/radutmp"
  radutmp: username = "%{User-Name}"
  radutmp: case_sensitive = yes
  radutmp: check_with_nas = yes
  radutmp: perm = 384
  radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.


Po wpisaniu loginu i hasła:


rad_recv: Access-Request packet from host 192.168.10.230:2048, id=52, 
length=161
         User-Name = "ja"
         NAS-IP-Address = 192.168.10.230
         NAS-Port = 0
         Called-Station-Id = "0090cc9f6223"
         Calling-Station-Id = "000e35d68866"
         NAS-Identifier = "Realtek Access Point. 8181"
         Framed-MTU = 1400
         NAS-Port-Type = Wireless-802.11
         Service-Type = Framed-User
         Connect-Info = "CONNECT 11Mbps 802.11b"
         EAP-Message = 0x02000007016a61
         Message-Authenticator = 0x9b2d7116e2c3484b81c149ad95b05d0a
   Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
   modcall[authorize]: module "preprocess" returns ok for request 0
   modcall[authorize]: module "mschap" returns noop for request 0
     rlm_realm: No '@' in User-Name = "ja", looking up realm NULL
     rlm_realm: No such realm "NULL"
   modcall[authorize]: module "suffix" returns noop for request 0
   rlm_eap: EAP packet type response id 0 length 7
   rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
   modcall[authorize]: module "eap" returns updated for request 0
     users: Matched entry ja at line 127
   modcall[authorize]: module "files" returns ok for request 0
modcall: leaving group authorize (returns updated) for request 0
   rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
   Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
   rlm_eap: EAP Identity
   rlm_eap: processing type tls
   rlm_eap_tls: Initiate
   rlm_eap_tls: Start returned 1
   modcall[authenticate]: module "eap" returns handled for request 0
modcall: leaving group authenticate (returns handled) for request 0
Sending Access-Challenge of id 52 to 192.168.10.230 port 2048
         EAP-Message = 0x010100061920
         Message-Authenticator = 0x00000000000000000000000000000000
         State = 0x192e9162be421cf1e92324da57f7a9e9
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.10.230:2048, id=53, 
length=246
         User-Name = "ja"
         NAS-IP-Address = 192.168.10.230
         NAS-Port = 0
         Called-Station-Id = "0090cc9f6223"
         Calling-Station-Id = "000e35d68866"
         NAS-Identifier = "Realtek Access Point. 8181"
         NAS-Port-Type = Wireless-802.11
         Service-Type = Framed-User
         Connect-Info = "CONNECT 11Mbps 802.11b"
         EAP-Message = 
0x0201005019800000004616030100410100003d030147223f0e49e9d9e4ef984dda10ac15192864eb27c70f3771035f50d3805ce79300001600040005000a000900640062000300060013001200630100
         State = 0x192e9162be421cf1e92324da57f7a9e9
         Message-Authenticator = 0x26ddf526473ecd19d513bb7ab148d95b
   Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
   modcall[authorize]: module "preprocess" returns ok for request 1
   modcall[authorize]: module "mschap" returns noop for request 1
     rlm_realm: No '@' in User-Name = "ja", looking up realm NULL
     rlm_realm: No such realm "NULL"
   modcall[authorize]: module "suffix" returns noop for request 1
   rlm_eap: EAP packet type response id 1 length 80
   rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
   modcall[authorize]: module "eap" returns updated for request 1
     users: Matched entry ja at line 127
   modcall[authorize]: module "files" returns ok for request 1
modcall: leaving group authorize (returns updated) for request 1
   rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
   Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
   rlm_eap: Request found, released from the list
   rlm_eap: EAP/peap
   rlm_eap: processing type peap
   rlm_eap_peap: Authenticate
   rlm_eap_tls: processing TLS
rlm_eap_tls:  Length Included
   eaptls_verify returned 11
     (other): before/accept initialization
     TLS_accept: before/accept initialization
   rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello
     TLS_accept: SSLv3 read client hello A
   rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello
     TLS_accept: SSLv3 write server hello A
   rlm_eap_tls: >>> TLS 1.0 Handshake [length 0694], Certificate
     TLS_accept: SSLv3 write certificate A
   rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
     TLS_accept: SSLv3 write server done A
     TLS_accept: SSLv3 flush data
     TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
   eaptls_process returned 13
   rlm_eap_peap: EAPTLS_HANDLED
   modcall[authenticate]: module "eap" returns handled for request 1
modcall: leaving group authenticate (returns handled) for request 1
Sending Access-Challenge of id 53 to 192.168.10.230 port 2048
         EAP-Message = 
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
         EAP-Message = 
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
         EAP-Message = 
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
         EAP-Message = 
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
         EAP-Message = 0x652e636f6d301e170d3034303132353133323630375a
         Message-Authenticator = 0x00000000000000000000000000000000
         State = 0x0d810cf0e72098b750c2224155ac9f63
Finished request 1
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.10.230:2048, id=54, 
length=172
         User-Name = "ja"
         NAS-IP-Address = 192.168.10.230
         NAS-Port = 0
         Called-Station-Id = "0090cc9f6223"
         Calling-Station-Id = "000e35d68866"
         NAS-Identifier = "Realtek Access Point. 8181"
         NAS-Port-Type = Wireless-802.11
         Service-Type = Framed-User
         Connect-Info = "CONNECT 11Mbps 802.11b"
         EAP-Message = 0x020200061900
         State = 0x0d810cf0e72098b750c2224155ac9f63
         Message-Authenticator = 0xa584d204c03dba07995fda3c5bf267aa
   Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 2
   modcall[authorize]: module "preprocess" returns ok for request 2
   modcall[authorize]: module "mschap" returns noop for request 2
     rlm_realm: No '@' in User-Name = "ja", looking up realm NULL
     rlm_realm: No such realm "NULL"
   modcall[authorize]: module "suffix" returns noop for request 2
   rlm_eap: EAP packet type response id 2 length 6
   rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
   modcall[authorize]: module "eap" returns updated for request 2
     users: Matched entry ja at line 127
   modcall[authorize]: module "files" returns ok for request 2
modcall: leaving group authorize (returns updated) for request 2
   rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
   Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 2
   rlm_eap: Request found, released from the list
   rlm_eap: EAP/peap
   rlm_eap: processing type peap
   rlm_eap_peap: Authenticate
   rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
   rlm_eap_tls: ack handshake fragment handler
   eaptls_verify returned 1
   eaptls_process returned 13
   rlm_eap_peap: EAPTLS_HANDLED
   modcall[authenticate]: module "eap" returns handled for request 2
modcall: leaving group authenticate (returns handled) for request 2
Sending Access-Challenge of id 54 to 192.168.10.230 port 2048
         EAP-Message = 
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
         EAP-Message = 
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
         EAP-Message = 
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
         Message-Authenticator = 0x00000000000000000000000000000000
         State = 0x9306e7c3181dc3f01643ea0c429870d7
Finished request 2
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.10.230:2048, id=55, 
length=172
         User-Name = "ja"
         NAS-IP-Address = 192.168.10.230
         NAS-Port = 0
         Called-Station-Id = "0090cc9f6223"
         Calling-Station-Id = "000e35d68866"
         NAS-Identifier = "Realtek Access Point. 8181"
         NAS-Port-Type = Wireless-802.11
         Service-Type = Framed-User
         Connect-Info = "CONNECT 11Mbps 802.11b"
         EAP-Message = 0x020300061900
         State = 0x9306e7c3181dc3f01643ea0c429870d7
         Message-Authenticator = 0x58fd5fabe4006070f3d4de7c9a7e99d0
   Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 3
   modcall[authorize]: module "preprocess" returns ok for request 3
   modcall[authorize]: module "mschap" returns noop for request 3
     rlm_realm: No '@' in User-Name = "ja", looking up realm NULL
     rlm_realm: No such realm "NULL"
   modcall[authorize]: module "suffix" returns noop for request 3
   rlm_eap: EAP packet type response id 3 length 6
   rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
   modcall[authorize]: module "eap" returns updated for request 3
     users: Matched entry ja at line 127
   modcall[authorize]: module "files" returns ok for request 3
modcall: leaving group authorize (returns updated) for request 3
   rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
   Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 3
   rlm_eap: Request found, released from the list
   rlm_eap: EAP/peap
   rlm_eap: processing type peap
   rlm_eap_peap: Authenticate
   rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
   rlm_eap_tls: ack handshake fragment handler
   eaptls_verify returned 1
   eaptls_process returned 13
   rlm_eap_peap: EAPTLS_HANDLED
   modcall[authenticate]: module "eap" returns handled for request 3
modcall: leaving group authenticate (returns handled) for request 3
Sending Access-Challenge of id 55 to 192.168.10.230 port 2048
         EAP-Message = 0x010400061900
         Message-Authenticator = 0x00000000000000000000000000000000
         State = 0x08a5886eb64f1111b22ffa2a254284cf
Finished request 3
Going to the next request
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 52 with timestamp 47223f0f
Cleaning up request 1 ID 53 with timestamp 47223f0f
Cleaning up request 2 ID 54 with timestamp 47223f0f
Cleaning up request 3 ID 55 with timestamp 47223f0f
Nothing to do.  Sleeping until we see a request.
rad_recv: Access-Request packet from host 192.168.10.230:2048, id=56, 
length=161
         User-Name = "ja"
         NAS-IP-Address = 192.168.10.230
         NAS-Port = 0
         Called-Station-Id = "0090cc9f6223"
         Calling-Station-Id = "000e35d68866"
         NAS-Identifier = "Realtek Access Point. 8181"
         Framed-MTU = 1400
         NAS-Port-Type = Wireless-802.11
         Service-Type = Framed-User
         Connect-Info = "CONNECT 11Mbps 802.11b"
         EAP-Message = 0x02000007016a61
         Message-Authenticator = 0xb0a7bf76afc8caba20b05ce7ef1cbc40
   Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 4
   modcall[authorize]: module "preprocess" returns ok for request 4
   modcall[authorize]: module "mschap" returns noop for request 4
     rlm_realm: No '@' in User-Name = "ja", looking up realm NULL
     rlm_realm: No such realm "NULL"
   modcall[authorize]: module "suffix" returns noop for request 4
   rlm_eap: EAP packet type response id 0 length 7
   rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
   modcall[authorize]: module "eap" returns updated for request 4
     users: Matched entry ja at line 127
   modcall[authorize]: module "files" returns ok for request 4
modcall: leaving group authorize (returns updated) for request 4
   rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
   Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 4
   rlm_eap: EAP Identity
   rlm_eap: processing type tls
   rlm_eap_tls: Initiate
   rlm_eap_tls: Start returned 1
   modcall[authenticate]: module "eap" returns handled for request 4
modcall: leaving group authenticate (returns handled) for request 4
Sending Access-Challenge of id 56 to 192.168.10.230 port 2048
         EAP-Message = 0x010100061920
         Message-Authenticator = 0x00000000000000000000000000000000
         State = 0xfd89ab8ad1784c31d1ba45d43ab28fb8
Finished request 4
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.10.230:2048, id=57, 
length=246
         User-Name = "ja"
         NAS-IP-Address = 192.168.10.230
         NAS-Port = 0
         Called-Station-Id = "0090cc9f6223"
         Calling-Station-Id = "000e35d68866"
         NAS-Identifier = "Realtek Access Point. 8181"
         NAS-Port-Type = Wireless-802.11
         Service-Type = Framed-User
         Connect-Info = "CONNECT 11Mbps 802.11b"
         EAP-Message = 
0x0201005019800000004616030100410100003d030147223f1ec0847c6b1664ae5b7d9058202ec99d4c049880b1c21bb4837e6dde9000001600040005000a000900640062000300060013001200630100
         State = 0xfd89ab8ad1784c31d1ba45d43ab28fb8
         Message-Authenticator = 0x8b428de6633435057b4b93ab0158a8ef
   Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 5
   modcall[authorize]: module "preprocess" returns ok for request 5
   modcall[authorize]: module "mschap" returns noop for request 5
     rlm_realm: No '@' in User-Name = "ja", looking up realm NULL
     rlm_realm: No such realm "NULL"
   modcall[authorize]: module "suffix" returns noop for request 5
   rlm_eap: EAP packet type response id 1 length 80
   rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
   modcall[authorize]: module "eap" returns updated for request 5
     users: Matched entry ja at line 127
   modcall[authorize]: module "files" returns ok for request 5
modcall: leaving group authorize (returns updated) for request 5
   rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
   Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 5
   rlm_eap: Request found, released from the list
   rlm_eap: EAP/peap
   rlm_eap: processing type peap
   rlm_eap_peap: Authenticate
   rlm_eap_tls: processing TLS
rlm_eap_tls:  Length Included
   eaptls_verify returned 11
     (other): before/accept initialization
     TLS_accept: before/accept initialization
   rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello
     TLS_accept: SSLv3 read client hello A
   rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello
     TLS_accept: SSLv3 write server hello A
   rlm_eap_tls: >>> TLS 1.0 Handshake [length 0694], Certificate
     TLS_accept: SSLv3 write certificate A
   rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
     TLS_accept: SSLv3 write server done A
     TLS_accept: SSLv3 flush data
     TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
   eaptls_process returned 13
   rlm_eap_peap: EAPTLS_HANDLED
   modcall[authenticate]: module "eap" returns handled for request 5
modcall: leaving group authenticate (returns handled) for request 5
Sending Access-Challenge of id 57 to 192.168.10.230 port 2048
         EAP-Message = 
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
         EAP-Message = 
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
         EAP-Message = 
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
         EAP-Message = 
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
         EAP-Message = 0x652e636f6d301e170d3034303132353133323630375a
         Message-Authenticator = 0x00000000000000000000000000000000
         State = 0x69b0e00558cc97defbc9f2847e8d0b58
Finished request 5
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.10.230:2048, id=58, 
length=172
         User-Name = "ja"
         NAS-IP-Address = 192.168.10.230
         NAS-Port = 0
         Called-Station-Id = "0090cc9f6223"
         Calling-Station-Id = "000e35d68866"
         NAS-Identifier = "Realtek Access Point. 8181"
         NAS-Port-Type = Wireless-802.11
         Service-Type = Framed-User
         Connect-Info = "CONNECT 11Mbps 802.11b"
         EAP-Message = 0x020200061900
         State = 0x69b0e00558cc97defbc9f2847e8d0b58
         Message-Authenticator = 0xac1bc76027c137ddb2ae0999dd1eb94a
   Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 6
   modcall[authorize]: module "preprocess" returns ok for request 6
   modcall[authorize]: module "mschap" returns noop for request 6
     rlm_realm: No '@' in User-Name = "ja", looking up realm NULL
     rlm_realm: No such realm "NULL"
   modcall[authorize]: module "suffix" returns noop for request 6
   rlm_eap: EAP packet type response id 2 length 6
   rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
   modcall[authorize]: module "eap" returns updated for request 6
     users: Matched entry ja at line 127
   modcall[authorize]: module "files" returns ok for request 6
modcall: leaving group authorize (returns updated) for request 6
   rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
   Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 6
   rlm_eap: Request found, released from the list
   rlm_eap: EAP/peap
   rlm_eap: processing type peap
   rlm_eap_peap: Authenticate
   rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
   rlm_eap_tls: ack handshake fragment handler
   eaptls_verify returned 1
   eaptls_process returned 13
   rlm_eap_peap: EAPTLS_HANDLED
   modcall[authenticate]: module "eap" returns handled for request 6
modcall: leaving group authenticate (returns handled) for request 6
Sending Access-Challenge of id 58 to 192.168.10.230 port 2048
         EAP-Message = 
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
         EAP-Message = 
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
         EAP-Message = 
0x060355040b13096c6f63616c686f7374311b301906035504031312436c69656e742063657274696669636174653121301f06092a864886f70d0109011612636c69656e74406578616d706c652e636f6d820100300c0603551d13040530030101ff300d06092a864886f70d01010405000381810033c00b66b1e579ef73a06798252dab8d5e5511fc00fd276d80d12f834777c6743fdc2743fca1507704e4bc0979e4f60ac3ad9ee83e6f347369229d1f77229ba2e982359da563024a00163dba6d6c986c0bad28af85132ff8f0d76501bf1b7c2dff658ce1e62c01997b6e64e3e8d4373354ce9912847651539063b85bbc5485c516030100040e000000
         Message-Authenticator = 0x00000000000000000000000000000000
         State = 0x6e6df1bccadb388f10edf7a88bcdff31
Finished request 6
Going to the next request
--- Walking the entire request list ---
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 192.168.10.230:2048, id=59, 
length=172
         User-Name = "ja"
         NAS-IP-Address = 192.168.10.230
         NAS-Port = 0
         Called-Station-Id = "0090cc9f6223"
         Calling-Station-Id = "000e35d68866"
         NAS-Identifier = "Realtek Access Point. 8181"
         NAS-Port-Type = Wireless-802.11
         Service-Type = Framed-User
         Connect-Info = "CONNECT 11Mbps 802.11b"
         EAP-Message = 0x020300061900
         State = 0x6e6df1bccadb388f10edf7a88bcdff31
         Message-Authenticator = 0x3cbdd59c59f8fb8d88b7689ba87fdf2f
   Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 7
   modcall[authorize]: module "preprocess" returns ok for request 7
   modcall[authorize]: module "mschap" returns noop for request 7
     rlm_realm: No '@' in User-Name = "ja", looking up realm NULL
     rlm_realm: No such realm "NULL"
   modcall[authorize]: module "suffix" returns noop for request 7
   rlm_eap: EAP packet type response id 3 length 6
   rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
   modcall[authorize]: module "eap" returns updated for request 7
     users: Matched entry ja at line 127
   modcall[authorize]: module "files" returns ok for request 7
modcall: leaving group authorize (returns updated) for request 7
   rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
   Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 7
   rlm_eap: Request found, released from the list
   rlm_eap: EAP/peap
   rlm_eap: processing type peap
   rlm_eap_peap: Authenticate
   rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
   rlm_eap_tls: ack handshake fragment handler
   eaptls_verify returned 1
   eaptls_process returned 13
   rlm_eap_peap: EAPTLS_HANDLED
   modcall[authenticate]: module "eap" returns handled for request 7
modcall: leaving group authenticate (returns handled) for request 7
Sending Access-Challenge of id 59 to 192.168.10.230 port 2048
         EAP-Message = 0x010400061900
         Message-Authenticator = 0x00000000000000000000000000000000
         State = 0x24010e59f93e5cbd32a74e1b66114e06
Finished request 7
Going to the next request
Waking up in 5 seconds...
--- Walking the entire request list ---
Cleaning up request 4 ID 56 with timestamp 47223f1e
Cleaning up request 5 ID 57 with timestamp 47223f1e
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 6 ID 58 with timestamp 47223f1f
Cleaning up request 7 ID 59 with timestamp 47223f1f
Nothing to do.  Sleeping until we see a request.
rad_recv: Access-Request packet from host 192.168.10.230:2048, id=60, 
length=179
         User-Name = "ja"
         NAS-IP-Address = 192.168.10.230
         NAS-Port = 0
         Called-Station-Id = "0090cc9f6223"
         Calling-Station-Id = "000e35d68866"
         NAS-Identifier = "Realtek Access Point. 8181"
         Framed-MTU = 1400
         NAS-Port-Type = Wireless-802.11
         Service-Type = Framed-User
         Connect-Info = "CONNECT 11Mbps 802.11b"
         EAP-Message = 0x02050007016a61
         State = 0x24010e59f93e5cbd32a74e1b66114e06
         Message-Authenticator = 0xbc96b724b42b9ec2d4fbbfce1f51d122
   Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 8
   modcall[authorize]: module "preprocess" returns ok for request 8
   modcall[authorize]: module "mschap" returns noop for request 8
     rlm_realm: No '@' in User-Name = "ja", looking up realm NULL
     rlm_realm: No such realm "NULL"
   modcall[authorize]: module "suffix" returns noop for request 8
   rlm_eap: EAP packet type response id 5 length 7
   rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
   modcall[authorize]: module "eap" returns updated for request 8
     users: Matched entry ja at line 127
   modcall[authorize]: module "files" returns ok for request 8
modcall: leaving group authorize (returns updated) for request 8
   rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
   Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 8
   rlm_eap: EAP Identity
   rlm_eap: processing type tls
   rlm_eap_tls: Initiate
   rlm_eap_tls: Start returned 1
   modcall[authenticate]: module "eap" returns handled for request 8
modcall: leaving group authenticate (returns handled) for request 8
Sending Access-Challenge of id 60 to 192.168.10.230 port 2048
         EAP-Message = 0x010600061920
         Message-Authenticator = 0x00000000000000000000000000000000
         State = 0xe8ee8282562fecad9ad33c7f9dc4aed2
Finished request 8
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 8 ID 60 with timestamp 47223f2e
Nothing to do.  Sleeping until we see a request.


W tym momencie połącznie się kończy.

Pozdr.
Krzysztof J.