🚀 go-pugleaf

> czy jest taka skladnia ktora pozwoli klikajac w odnosnik na stronie
wap'owej
> by telefon wybral konkretny numer telefonu ??

Prosze bardzo, fragment "Wireless Application Protocol Wireless Telephony
Application Interface Specification":
-------

8.3 URI functions
8.3.1 wtai://wp/mc

Function:
wtai://wp/mc;number

Description:
Initiates a mobile-originated voice call. This function is blocking. No WTA
events are generated by the voice call initiated using this function.
The number parameter specifies the destination to call and must be a
phone-number as defined in [FORMAT].
This function returns a value that indicates the result of the function
invocation, i.e., whether or not the voice call was established.

Permission Types:
SINGLE (see [WTA]). The number parameter must be displayed to the user when
obtaining permission.

Parameters:
number = string (phone-number)

Result value:
"" = call was established successfully
"-105" = called party is busy
"-106" = network is not available
"-107" = called party did not answer
"-200" = invocation error
"-1" = unspecified error

Associated Events:
-

Exceptions:
If the number parameter is not a phone-number as defined in [FORMAT], this
function returns an invocation error.
If the voice call can not be initiated, e.g., because there is no service,
this function returns an invocation error.

Example:
<go href="wtai://wp/mc;5554367"/>

8.3.2 wtai://wp/sd

Function:
wtai://wp/sd;dtmf

Description:
Sends DTMF sequence through the voice call most recently created using the
WTAPublic.makeCall or wtai://wp/mc function. This function is blocking. No
WTA events are generated as a direct or indirect result of invoking this
function.
The dtmf parameter specifies the DTMF sequence to be sent and must be a
dialstring as defined in [FORMAT].
This function returns a value that indicates the result of the function
invocation; i.e., whether or not the DTMF was sent.

Permission Types:
CONTEXT, SINGLE (see [WTA]).

Parameters:
dtmf = string (dialstring)

Result value:
"" = DTMF sequence was sent
"-108" = could not send DTMF because no active voice connection
"-200" = invocation error
"-1" = unspecified error

Associated Events:
-

Exceptions:
If the dtmf parameter is not a dialstring as defined in [FORMAT], this
function returns an invocation error.
If the DTMF can not be sent, e.g., because there is no active call, this
function returns an invocation error.

Example:
<go href="wtai://wp/sd;555*1234"/>

8.3.3 wtai://wp/ap

Function:
wtai://wp/ap;number;name

Description:
Writes a new phonebook entry.
The number parameter specifies the phone number to associate with the entry
and must be a phone-number as defined in [FORMAT].
The name parameter specifies the name to associate with the entry and may be
an empty string.
This function returns a value that indicates the result of the function
invocation; i.e., whether or not the phonebook entry was added.

Permission Types:
SINGLE (see [WTA]). The name and number parameters must be displayed to the
user when obtaining permission.

Parameters:
number = string (phone-number)
name = string

Result value:
"" = phonebook entry was added
"-100" = name parameter is unacceptable or too long
"-101" = number parameter is not a valid phone-number
"-102" = number parameter is too long
"-103" = phonebook entry could not be written
"-104" = phonebook is full
"-200" = invocation error
"-1" = unspecified error

Associated Events:
-

Exceptions:
If the number parameter is not a phone-number as defined in [FORMAT], this
function returns an invocation error.
If the phonebook entry is not written, e.g., because the phonebook is full,
this function returns an invocation error.

Example:
<go href="wtai://wp/ap;5554367;EINSTEIN"/>

-----
p, mls