🚀 go-pugleaf

W dniu 17.08.2025 o 19:43, PiteR pisze:
> why in cars we dont use soldering connections but crimped terminals?
> 
> In automotive applications, crimped terminals are preferred over
> soldered connections for several important reasons, primarily related
> to reliability, vibration resistance, and ease of manufacturing.
> A properly crimped terminal provides excellent electrical conductivity,
> often better than a solder joint. Crimping displaces air and forms a
> gas-tight seal that resists corrosion and oxidation.
> 
> 
> is soldering crimped terminals an advantage or make no sense?
> 
> Soldering crimped terminals is generally not recommended and usually
> offers no significant advantage in fact, it can introduce new problems.
> 
> Increases Brittleness. Solder wicks into the wire strands and up the
> insulation. This makes the wire rigid, so it can crack near the joint
> when the wire flexes or vibrates.
> 
> 
> 
> reszty nie trzeba, zamykam wątek ;)
> 
No to Ci przylutował z nienacka :)

-- 
Pixel®🇵🇱
Albo PiS albo Polska