Thread View: pl.comp.sys.xwindow
4 messages
4 total messages
Started by Daniel Giemza
Tue, 14 Apr 1998 14:08
Signal 11 ( sorry ale dlugie ).
Author: Daniel Giemza
Date: Tue, 14 Apr 1998 14:08
Date: Tue, 14 Apr 1998 14:08
300 lines
15278 bytes
15278 bytes
Hej !
Mam taki problemik, przy starcie x-sow otrzymuje taki komunikat
---------------------------------------
Fatal server error:
Caught signal 11. Server aborting
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
_X11TransSocketUNIXConnect: Can't connect: errno = 111
giving up.
xinit: Connection refused (errno 111): unable to connect to X server
xinit: No such process (errno 3): Server error.
--------------------------------
Mam PENTIUM MMX 200 podciagnietego na 233 ( probowalem jednak tez na 200 -
bez rezultatu) i S3 Virgea 4 megowego ( karta detektuje sie dobrze ).
Wymienilem juz RAM na inny oraz karte graficzna ( pozyczylem z firmy taka
sama ) i to tez nic nie dalo ;-((((
Mam Redhata 5.0.
Ponizej przesylam wynik polecenia strace startx - soorki jesli jest on
zbyt dlugi, ale nie wiedzialem gdzie go obciac.
Script started on Thu Apr 9 22:33:28 1998
[root@tomdan /root]# strace startx
execve("/usr/X11R6/bin/startx", ["startx"], [/* 18 vars */]) = 0
brk(0) = 0x80930dc
open("/etc/ld.so.preload", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat(3, {st_mode=0, st_size=0, ...}) = 0
mmap(0, 9216, PROT_READ, MAP_PRIVATE, 3, 0) = 0x4000b000
close(3) = 0
open("/lib/libtermcap.so.2", O_RDONLY) = 3
mmap(0, 4096, PROT_READ, MAP_PRIVATE, 3, 0) = 0x4000e000
munmap(0x4000e000, 4096) = 0
mmap(0, 12000, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x4000e000
mprotect(0x40010000, 3808, PROT_NONE) = 0
mmap(0x40010000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x1000) = 0x40010000
close(3) = 0
open("/lib/libc.so.6", O_RDONLY) = 3
mmap(0, 4096, PROT_READ, MAP_PRIVATE, 3, 0) = 0x40011000
munmap(0x40011000, 4096) = 0
mmap(0, 648136, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x40011000
mprotect(0x4009f000, 66504, PROT_NONE) = 0
mmap(0x4009f000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x8d000) = 0x4009f000
mmap(0x400a4000, 46024, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x400a4000
close(3) = 0
mprotect(0x40011000, 581632, PROT_READ|PROT_WRITE) = 0
mprotect(0x40011000, 581632, PROT_READ|PROT_EXEC) = 0
personality(0 /* PER_??? */) = 0
getpid() = 268
getuid() = 0
getgid() = 0
geteuid() = 0
getegid() = 0
brk(0) = 0x80930dc
brk(0x80930fc) = 0x80930fc
brk(0x8094000) = 0x8094000
time(NULL) = 892154014
sigaction(SIGCHLD, {SIG_DFL}, {SIG_DFL}) = 0
sigaction(SIGCHLD, {SIG_DFL}, {SIG_DFL}) = 0
sigaction(SIGINT, {SIG_DFL}, {SIG_DFL}) = 0
sigaction(SIGINT, {SIG_DFL}, {SIG_DFL}) = 0
sigaction(SIGQUIT, {SIG_DFL}, {SIG_DFL}) = 0
sigaction(SIGQUIT, {SIG_DFL}, {SIG_DFL}) = 0
sigaction(SIGHUP, {0x804b600, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM PROF], 0}, {SIG_DFL}) = 0
sigaction(SIGINT, {0x804b600, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM PROF], 0}, {SIG_DFL}) = 0
sigaction(SIGILL, {0x804b600, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM PROF], 0}, {SIG_DFL}) = 0
sigaction(SIGTRAP, {0x804b600, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM PROF], 0}, {SIG_DFL}) = 0
sigaction(SIGABRT, {0x804b600, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM PROF], 0}, {SIG_DFL}) = 0
sigaction(SIGFPE, {0x804b600, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM PROF], 0}, {SIG_DFL}) = 0
sigaction(SIGBUS, {0x804b600, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM PROF], 0}, {SIG_DFL}) = 0
sigaction(SIGSEGV, {0x804b600, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM PROF], 0}, {SIG_DFL}) = 0
sigaction(SIGPIPE, {0x804b600, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM PROF], 0}, {SIG_DFL}) = 0
sigaction(SIGALRM, {0x804b600, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM PROF], 0}, {SIG_DFL}) = 0
sigaction(SIGTERM, {0x804b600, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM PROF], 0}, {SIG_DFL}) = 0
sigaction(SIGXCPU, {0x804b600, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM PROF], 0}, {SIG_DFL}) = 0
sigaction(SIGXFSZ, {0x804b600, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM PROF], 0}, {SIG_DFL}) = 0
sigaction(SIGVTALRM, {0x804b600, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM PROF], 0}, {SIG_DFL}) = 0
sigaction(SIGPROF, {0x804b600, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM PROF], 0}, {SIG_DFL}) = 0
sigaction(SIGUSR1, {0x804b600, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM PROF], 0}, {SIG_DFL}) = 0
sigaction(SIGUSR2, {0x804b600, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM PROF], 0}, {SIG_DFL}) = 0
sigprocmask(SIG_BLOCK, NULL, []) = 0
sigaction(SIGQUIT, {SIG_IGN}, {SIG_DFL}) = 0
open("/etc/nsswitch.conf", O_RDONLY) = 3
fstat(3, {st_mode=0, st_size=0, ...}) = 0
mmap(0, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x400b0000
read(3, "#\n# /etc/nsswitch.conf\n#\n# An"..., 4096) = 1208
read(3, "", 4096) = 0
close(3) = 0
munmap(0x400b0000, 4096) = 0
open("/lib/libnss_files.so.1", O_RDONLY) = 3
mmap(0, 4096, PROT_READ, MAP_PRIVATE, 3, 0) = 0x400b0000
brk(0x8095000) = 0x8095000
munmap(0x400b0000, 4096) = 0
mmap(0, 31492, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x400b0000
mprotect(0x400b7000, 2820, PROT_NONE) = 0
mmap(0x400b7000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x6000) = 0x400b7000
close(3) = 0
mprotect(0x400b0000, 28672, PROT_READ|PROT_WRITE) = 0
mprotect(0x400b0000, 28672, PROT_READ|PROT_EXEC) = 0
open("/etc/passwd", O_RDONLY) = 3
fcntl(3, F_GETFD) = 0
fcntl(3, F_SETFD, FD_CLOEXEC) = 0
fstat(3, {st_mode=0, st_size=0, ...}) = 0
mmap(0, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x400b8000
read(3, "root:Eq/UhpQocUS0w:0:0:root:/roo"..., 4096) = 623
^^^^^ nieaktualne of course ;-)))
close(3) = 0
munmap(0x400b8000, 4096) = 0
uname({sys="Linux", node="tomdan.tarnow.pl", ...}) = 0
open("/lib/libnss_nisplus.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/libnss_nisplus.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/lib/libnss_nis.so.1", O_RDONLY) = 3
mmap(0, 4096, PROT_READ, MAP_PRIVATE, 3, 0) = 0x400b8000
munmap(0x400b8000, 4096) = 0
mmap(0, 32736, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x400b8000
mprotect(0x400bf000, 4064, PROT_NONE) = 0
mmap(0x400bf000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x6000) = 0x400bf000
close(3) = 0
open("/lib/libnsl.so.1", O_RDONLY) = 3
mmap(0, 4096, PROT_READ, MAP_PRIVATE, 3, 0) = 0x400c0000
munmap(0x400c0000, 4096) = 0
mmap(0, 20640, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x400c0000
mprotect(0x400c4000, 4256, PROT_NONE) = 0
mmap(0x400c4000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x3000) = 0x400c4000
mmap(0x400c5000, 160, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x400c5000
close(3) = 0
mprotect(0x400c0000, 16384, PROT_READ|PROT_WRITE) = 0
mprotect(0x400c0000, 16384, PROT_READ|PROT_EXEC) = 0
mprotect(0x400b8000, 28672, PROT_READ|PROT_WRITE) = 0
mprotect(0x400b8000, 28672, PROT_READ|PROT_EXEC) = 0
brk(0x8096000) = 0x8096000
lstat(".", {st_mode=0, st_size=0, ...}) = 0
lstat("/", {st_mode=0, st_size=0, ...}) = 0
lstat("..", {st_mode=0, st_size=0, ...}) = 0
open("..", O_RDONLY) = 3
fcntl(3, F_SETFD, FD_CLOEXEC) = 0
fstat(3, {st_mode=0, st_size=0, ...}) = 0
brk(0x8098000) = 0x8098000
lseek(3, 0, SEEK_CUR) = 0
getdents(3, /* 16 entries */, 3933) = 260
lstat("../root", {st_mode=0, st_size=0, ...}) = 0
close(3) = 0
getpid() = 268
getppid() = 267
stat(".", {st_mode=0, st_size=0, ...}) = 0
stat("/sbin/sh", 0xbffffa64) = -1 ENOENT (No such file or directory)
stat("/bin/sh", {st_mode=0, st_size=0, ...}) = 0
getpgrp() = 267
fcntl(-1, F_SETFD, FD_CLOEXEC) = -1 EBADF (Bad file descriptor)
sigaction(SIGCHLD, {0x805c090, [], 0}, {SIG_DFL}) = 0
open("/usr/X11R6/bin/startx", O_RDONLY) = 3
lseek(3, 0, SEEK_CUR) = 0
read(3, "#!/bin/sh\n\n# $XConsortium: sta"..., 80) = 80
lseek(3, 0, SEEK_SET) = 0
fcntl(3, F_SETFD, FD_CLOEXEC) = 0
fcntl(3, F_GETFL) = 0 (flags O_RDONLY)
fstat(3, {st_mode=0, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 0
read(3, "#!/bin/sh\n\n# $XConsortium: sta"..., 1454) = 1454
brk(0x8099000) = 0x8099000
stat("/root/.xinitrc", {st_mode=0, st_size=0, ...}) = 0
stat("/root/.xserverrc", 0xbffff810) = -1 ENOENT (No such file or directory)
stat("/usr/X11R6/lib/X11/xinit/xserverrc", 0xbffff68c) = -1 ENOENT (No such file or directory)
stat(".", {st_mode=0, st_size=0, ...}) = 0
stat("/sbin/xinit", 0xbffff960) = -1 ENOENT (No such file or directory)
stat("/bin/xinit", 0xbffff960) = -1 ENOENT (No such file or directory)
stat("/usr/sbin/xinit", 0xbffff960) = -1 ENOENT (No such file or directory)
stat("/usr/bin/xinit", 0xbffff960) = -1 ENOENT (No such file or directory)
stat("/usr/X11R6/bin/xinit", {st_mode=0, st_size=0, ...}) = 0
sigprocmask(SIG_BLOCK, [INT CHLD], []) = 0
lseek(3, -12, SEEK_CUR) = 1442
fork() = 269
sigprocmask(SIG_SETMASK, [], NULL) = 0
sigprocmask(SIG_BLOCK, [CHLD], []) = 0
sigprocmask(SIG_SETMASK, [], NULL) = 0
sigprocmask(SIG_BLOCK, [CHLD], []) = 0
sigaction(SIGINT, {0x805b580, [], 0}, {0x804b600, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM PROF], 0}) = 0
wait4(-1,
XFree86 Version 3.3.1 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: August 4 1997
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.31 i686 [ELF]
Configured drivers:
S3V: accelerated server for S3 graphics adaptors (Patchlevel 0)
s3_ViRGE
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "pl"
(**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
(**) S3V: Graphics device ID: "ViRGE/DX or /GX"
(**) S3V: Monitor ID: "My Monitor"
(--) S3V: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted.
(--) S3V: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted.
(--) S3V: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
(--) S3V: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
(--) S3V: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) S3V: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) S3V: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) S3V: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) S3V: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) S3V: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted.
(--) S3V: Invalid vertical timing for mode "400x300". Deleted.
(--) S3V: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted.
(--) S3V: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted.
(--) S3V: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted.
(--) S3V: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted.
(--) S3V: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted.
Warning: The directory "/usr/X11R6/lib/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/"
(--) S3V: PCI: ViRGE/DX or /GX rev 1, Linear FB @ 0xe0000000
(--) S3V: chipset: ViRGE/DX rev. 1
(--) S3V: chipset driver: s3_ViRGE
(--) S3V: videoram: 4096k
(--) S3V: Ramdac type: s3_trio64
(--) S3V: Ramdac speed: 170 MHz
(--) S3V: Using Trio32/64 programmable clock (MCLK 50.114 MHz)
(--) S3V: Maximum allowed dot-clock: 170.000 MHz
(**) S3V: Mode "800x600": mode clock = 36.000
(--) S3V: Using 6 bits per RGB value
(--) S3V: videoram usage reduced to 3200k to avoid co-ord overflow
(**) S3V: Virtual resolution set to 800x600
(--) S3V: Local bus LAW is 0xE00xxxxx
(--) S3V: Using a banksize of 3200k, line width of 800
Fatal server error:
Caught signal 11. Server aborting
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
_X11TransSocketUNIXConnect: Can't connect: errno = 111
giving up.
xinit: Connection refused (errno 111): unable to connect to X server
xinit: No such process (errno 3): Server error.
[WIFEXITED(s) && WEXITSTATUS(s) == 1], 0, NULL) = 269
sigprocmask(SIG_BLOCK, [CHLD], [CHLD]) = 0
sigprocmask(SIG_SETMASK, [CHLD], NULL) = 0
sigprocmask(SIG_SETMASK, [], NULL) = 0
--- SIGCHLD (Child exited) ---
wait4(-1, 0xbffff938, WNOHANG, NULL) = -1 ECHILD (No child processes)
sigreturn() = ? (mask now [])
sigaction(SIGINT, {0x804b600, [], 0}, {0x805b580, [], 0}) = 0
sigprocmask(SIG_BLOCK, [CHLD], []) = 0
sigprocmask(SIG_SETMASK, [], NULL) = 0
read(3, "\n\n\n\n\n\n\n\n\n\n\n\n", 1454) = 12
sigprocmask(SIG_BLOCK, [CHLD], []) = 0
sigprocmask(SIG_SETMASK, [], NULL) = 0
sigprocmask(SIG_BLOCK, [CHLD], []) = 0
sigprocmask(SIG_SETMASK, [], NULL) = 0
sigprocmask(SIG_BLOCK, [CHLD], []) = 0
sigprocmask(SIG_SETMASK, [], NULL) = 0
sigprocmask(SIG_BLOCK, [CHLD], []) = 0
sigprocmask(SIG_SETMASK, [], NULL) = 0
sigprocmask(SIG_BLOCK, [CHLD], []) = 0
sigprocmask(SIG_SETMASK, [], NULL) = 0
sigprocmask(SIG_BLOCK, [CHLD], []) = 0
sigprocmask(SIG_SETMASK, [], NULL) = 0
sigprocmask(SIG_BLOCK, [CHLD], []) = 0
sigprocmask(SIG_SETMASK, [], NULL) = 0
sigprocmask(SIG_BLOCK, [CHLD], []) = 0
sigprocmask(SIG_SETMASK, [], NULL) = 0
sigprocmask(SIG_BLOCK, [CHLD], []) = 0
sigprocmask(SIG_SETMASK, [], NULL) = 0
sigprocmask(SIG_BLOCK, [CHLD], []) = 0
sigprocmask(SIG_SETMASK, [], NULL) = 0
sigprocmask(SIG_BLOCK, [CHLD], []) = 0
sigprocmask(SIG_SETMASK, [], NULL) = 0
sigprocmask(SIG_BLOCK, [CHLD], []) = 0
sigprocmask(SIG_SETMASK, [], NULL) = 0
read(3, "", 1454) = 0
_exit(1) = ?
Pozdrowienia
Daniel Giemza
#irc danielek
Re: Signal 11 ( sorry ale dlugie ).
Author: Tomasz Kłoczko
Date: Tue, 14 Apr 1998 16:19
Date: Tue, 14 Apr 1998 16:19
33 lines
2054 bytes
2054 bytes
Daniel Giemza <daniel@mefisto.toi.tarman.pl> wrote: : Hej ! : Mam taki problemik, przy starcie x-sow otrzymuje taki komunikat : --------------------------------------- : Fatal server error: : Caught signal 11. Server aborting : When reporting a problem related to a server crash, please send : the full server output, not just the last messages : _X11TransSocketUNIXConnect: Can't connect: errno = 111 : giving up. : xinit: Connection refused (errno 111): unable to connect to X server : xinit: No such process (errno 3): Server error. : -------------------------------- : Mam PENTIUM MMX 200 podciagnietego na 233 ( probowalem jednak tez na 200 - : bez rezultatu) i S3 Virgea 4 megowego ( karta detektuje sie dobrze ). : Wymienilem juz RAM na inny oraz karte graficzna ( pozyczylem z firmy taka : sama ) i to tez nic nie dalo ;-(((( : Mam Redhata 5.0. W tej chwili nie masz RH 5.0 tylko przegrany procesor. Obniż częstotliwość do takiej jaką bozia nakazuje, a sig 11 zniknie. Sig 11 generalnie oznacza kłopoty sprzętowe, a ty je sam sobie wygenerowałeś wg zdania poniżej. kloczek -- ----------------------------------------------------------- *Ludzie nie mają problemów, tylko sobie sami je stwarzają* ----------------------------------------------------------- Tomasz Kłoczko, sys adm @zie.pg.gda.pl|*e-mail: kloczek@rudy.mif.pg.gda.pl*
Re: Signal 11 ( sorry ale dlugie ).
Author: Witold Grzesik
Date: Wed, 15 Apr 1998 02:53
Date: Wed, 15 Apr 1998 02:53
25 lines
1864 bytes
1864 bytes
Daniel Giemza napisał(a) w wiadomości: ... >Hej ! >Mam taki problemik, przy starcie x-sow otrzymuje taki komunikat > [ C I A C H ] Heheheh mialem taki sam problem ale moi kochani koledzy (ciekawe czy czytaja ta grupe ?) czyli bibip i bojar pomogli. Otóz szanowny panie.... jesli instalujesz tego RedHata z plyty dolaczonej do LinuxPlus nr 1/98 to on Ci nie zainstalowal odpowiedniego servera. Musisz sie pobawic xf86config i po zakonczeniu konfiguracji zainstalowac odpowiedni X-server. Mam dokladnie taki sam sprzet (karta i procesor) i u mnie chodzi.. musisz sobie odszukac katalog SRPM (albo SRPMS) nie pamietam dokladnie i jesli np. w konfiguracji ustawiles SVGA to musisz odszukac ten server (XF86_SVGA) lub cos takiego i oczywiscie rpm -i <nazwa_servera>, a potem zrobic tylko linka (chociaz on chyba juz jest zrobiony... sprawdz sobie... jesli nie pomoze wal maila na priv. Acha na poczatek odpal sobie zwykly server SVGA te accelerated sobie skonfigurujesz jak juz beda X-y chodzic ;-)) powodzenia Regards Witold Grzesik bojsig@platon.man.lublin.pl wgrzesik@friko4.onet.pl @ IRC MaTtOiD
Re: Signal 11 ( sorry ale dlugie ).
Author: Witold Grzesik
Date: Wed, 15 Apr 1998 02:53
Date: Wed, 15 Apr 1998 02:53
13 lines
1290 bytes
1290 bytes
Tomasz Kłoczko napisał(a) w wiadomości: <6h02ba$kq$1@sunrise.pg.gda.pl>... >W tej chwili nie masz RH 5.0 tylko przegrany procesor. Obniż częstotliwość >do takiej jaką bozia nakazuje, a sig 11 zniknie. Sig 11 generalnie oznacza >kłopoty sprzętowe, a ty je sam sobie wygenerowałeś wg zdania poniżej. Proponuję jednak najpierw zrobić to co ci napisałem, ja mam 200 podciągniętą na 233 i chodzi spoko Regards Witold Grzesik bojsig@platon.man.lublin.pl wgrzesik@friko4.onet.pl @ IRC MaTtOiD
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads