Thread View: pl.comp.sys.amiga
4 messages
4 total messages
Started by identifikator: 20040501
Thu, 26 Jan 2012 09:43
vic 20 a c64
Author: identifikator: 20040501
Date: Thu, 26 Jan 2012 09:43
Date: Thu, 26 Jan 2012 09:43
2 lines
951 bytes
951 bytes
czy komputer VIC20 ma takie samo wyjście monitorowe jak C64? widział Ktoś gdzieś rozpiskę?
Re: vic 20 a c64
Author: Vituniu
Date: Thu, 26 Jan 2012 10:05
Date: Thu, 26 Jan 2012 10:05
9 lines
1100 bytes
1100 bytes
> czy komputer VIC20 ma takie samo wyjście monitorowe jak C64? > widział Ktoś gdzieś rozpiskę? Sluchy chodza, ze Google maja... hint: vic20 video pinout pozdrawiam, Vituniu.
Re: vic 20 a c64
Author: identifikator: 20040501
Date: Thu, 26 Jan 2012 10:27
Date: Thu, 26 Jan 2012 10:27
11 lines
1104 bytes
1104 bytes
a co to jest : Pin 1 = 5 volts reg. (10 mA max) Pin 2 = Ground Pin 3 = Audio Pin 4 = Video low Pin 5 = Video high Video HIGH i LOW?
Re: vic 20 a c64
Author: Konrad Stepien
Date: Thu, 26 Jan 2012 10:39
Date: Thu, 26 Jan 2012 10:39
19 lines
1444 bytes
1444 bytes
On 2012-01-26, identifikator: 20040501 <NOSPAMtestowanije@go2.pl> wrote: > a co to jest : > > Pin 1 = 5 volts reg. (10 mA max) > Pin 2 = Ground > Pin 3 = Audio > Pin 4 = Video low > Pin 5 = Video high > > Video HIGH i LOW? Hardwarebook twierdzi że Pin 4 & 5 are wired together inside some computers, and output signals with different signal level on some other computers. Pin 1 is used to power the external RF modulator, if used. -- Konrad Stępień
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads