Article View: pl.comp.os.linux
Article #907907Re: Problem rodzi problem... NAS
From: szopen
Date: Thu, 21 Nov 2024 19:38
Date: Thu, 21 Nov 2024 19:38
203 lines
12633 bytes
12633 bytes
On 21.11.2024 18:22, szopen wrote:
Raporty po long teΕcie.
admin@ServerNAS:~$ sudo /usr/sbin/smartctl -a /dev/hdc
smartctl 5.42 2011-10-20 r3458 [padre-linux-2.6.17.14ReadyNAS] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital RE3 Serial ATA
Device Model: WDC WD5002ABYS-02B1B0
Serial Number: WD-WCASY8087183
LU WWN Device Id: 5 0014ee 2037f3358
Firmware Version: 02.03B03
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Nov 21 22:48:45 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 9480) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 112) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 202 184 021 Pre-fail Always - 2866
4 Start_Stop_Count 0x0032 089 089 000 Old_age Always - 11778
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 058 058 000 Old_age Always - 30741
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2131
192 Power-Off_Retract_Count 0x0032 198 198 000 Old_age Always - 2113
193 Load_Cycle_Count 0x0032 197 197 000 Old_age Always - 9664
194 Temperature_Celsius 0x0022 103 099 000 Old_age Always - 44
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 30740 -
# 2 Extended offline Aborted by host 10% 30738 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
admin@ServerNAS:~$ sudo /usr/sbin/smartctl -a /dev/hde
smartctl 5.42 2011-10-20 r3458 [padre-linux-2.6.17.14ReadyNAS] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital RE3 Serial ATA
Device Model: WDC WD5002ABYS-02B1B0
Serial Number: WD-WCASY8419856
LU WWN Device Id: 5 0014ee 2038da1b8
Firmware Version: 02.03B03
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Nov 21 22:48:54 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 9480) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 112) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 193 183 021 Pre-fail Always - 3341
4 Start_Stop_Count 0x0032 090 090 000 Old_age Always - 10050
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 058 058 000 Old_age Always - 30738
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2133
192 Power-Off_Retract_Count 0x0032 198 198 000 Old_age Always - 2114
193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 7935
194 Temperature_Celsius 0x0022 103 100 000 Old_age Always - 44
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 30737 -
# 2 Extended offline Aborted by host 10% 30735 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
--
szopen
Technical Details
Message-ID:
<vho27p$p940$1@dont-email.me>Path:
mbox-mo1.pugleaf.net!news-archive.icm.edu.pl!news.icm.edu.pl!newsfeed.pionier.net.pl!2.eu.feeder.erje.net!feeder.erje.net!news.quux.org!eternal-september.org!feeder2.eternal-september.org!news.eternal-september.org!.POSTED!not-for-mailReferences:
<vhi6e7$1s1fs$1@dont-email.me> <vhihv3$1um7k$1@dont-email.me> <vhk05h$2aigt$1@dont-email.me> <vhkpsq$49po$1@dont-email.me> <vhkrds$4jd3$1@dont-email.me> <e2f5e08f-f129-4c95-a764-390f138673fa@hooterville.invalid> <vhl24i$5snd$1@dont-email.me> <13fa33d0-6f06-4394-aaa9-5f792bfcd602@hooterville.invalid> <vhmlrq$hmvs$1@dont-email.me> <vhnd32$li8r$1@dont-email.me> <vhno9e$nakg$1@dont-email.me> <vhnq8c$nmhn$1@dont-email.me>Show Full Headers
Complete Article Headers
Path: mbox-mo1.pugleaf.net!news-archive.icm.edu.pl!news.icm.edu.pl!newsfeed.pionier.net.pl!2.eu.feeder.erje.net!feeder.erje.net!news.quux.org!eternal-september.org!feeder2.eternal-september.org!news.eternal-september.org!.POSTED!not-for-mail From: szopen <szop@en.szop> Newsgroups: pl.comp.os.linux Subject: Re: Problem rodzi problem... NAS Date: Thu, 21 Nov 2024 20:38:33 +0100 Organization: A noiseless patient Spider Lines: 203 Message-ID: <vho27p$p940$1@dont-email.me> References: <vhi6e7$1s1fs$1@dont-email.me> <vhihv3$1um7k$1@dont-email.me> <vhk05h$2aigt$1@dont-email.me> <vhkpsq$49po$1@dont-email.me> <vhkrds$4jd3$1@dont-email.me> <e2f5e08f-f129-4c95-a764-390f138673fa@hooterville.invalid> <vhl24i$5snd$1@dont-email.me> <13fa33d0-6f06-4394-aaa9-5f792bfcd602@hooterville.invalid> <vhmlrq$hmvs$1@dont-email.me> <vhnd32$li8r$1@dont-email.me> <vhno9e$nakg$1@dont-email.me> <vhnq8c$nmhn$1@dont-email.me> MIME-Version: 1.0 Injection-Date: Thu, 21 Nov 2024 20:38:34 +0100 (CET) Injection-Info: dont-email.me; posting-host="d17dc3a270f39fcde68dce9c60fd70e5"; logging-data="828544"; mail-complaints-to="abuse@eternal-september.org"; posting-account="U2FsdGVkX18UgCiU0WmZIFZHP8M4KRLn" User-Agent: Mozilla Thunderbird Cancel-Lock: sha1:U7oAg18SN8duFt9XvQxzPZmMvoE= In-Reply-To: <vhnq8c$nmhn$1@dont-email.me> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit