usb_modeswitch i E173s

Thread View: pl.comp.os.linux.sprzet

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by mariusz Thu, 10 Nov 2011 12:10

#74314

Author: mariusz
Date: Thu, 10 Nov 2011 12:10

82 lines
3625 bytes

Witam
Mam problem z uruchomieniem połączenia na modemie Huawei E173. Mimo że 
jest to model E173 (tak jest na nalepce) to jego ID jakie podaje lsusb 
pasuje (to co przeglądałem w 40-usb_switch.rules) raczej do E173s i tak 
też go próbowałem uruchomić.

#lsusb
Bus 002 Device 012: ID 12d1:1c0b Huawei Technologies Co., Ltd.

Przeglądałem wiele tematów na forach ale mimo wszystko nie mogę sobie z 
tym poradzić. Chodzi mi o komunikat jaki polecenie generuje przy próbie 
zmiany trybu pracy dla modemu:

usb_modeswitch -c /etc/usb_modeswitch.d/12d1:1c0b

Looking for target devices ...
Error: entry in product ID list has wrong length: 0x1c05. Ignoring
  No devices in target mode or class found
Looking for default devices ...
  Found devices in default mode, class or configuration (1)
Accessing device 012 on bus 002 ...
Getting the current device configuration ...
  OK, got current device configuration (1)
Using first interface: 0x00
Using endpoints 0x0f (out) and 0x8f (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
  OK, driver found; name unknown, limitation of libusb1
  OK, driver "unkown" detached

SCSI inquiry data (for identification)
-------------------------
   Vendor String: HUAWEI
    Model String: Mass Storage
Revision String: 2.31
-------------------------

USB description data (for identification)
-------------------------
Manufacturer: HUAWEI
      Product: HUAWEI Mobile
   Serial No.: not provided
-------------------------
Setting up communication with interface 0
Using endpoint 0x0f for message sending ...
Trying to send message 1 to endpoint 0x0f ...
  OK, message successfully sent
Resetting response endpoint 0x8f
Resetting message endpoint 0x0f
  Could not reset endpoint (probably harmless): -34
  Device is gone, skipping any further commands

Checking for mode switch (max. 20 times, once per second) ...
  Searching for target devices ...
...
Error: entry in product ID list has wrong length: 0x1c05. Ignoring
  No new devices in target mode or class found
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Mode switch has failed. Bye.

Zmiana z 0x1c0b na 0x1c05 powinien zmienić z trybu domyślnego jakim jest 
srotage na tryb modemmu

Z tego co się orientuję to w /etc/usb_modeswitch.d/12d1:1c0b mam standard:

#######################################################
# Huawei E173s

DefaultVendor= 0x12d1
DefaultProduct=0x1c0b

TargetVendor=  0x12d1
TargetProductList=0x1c05

MessageContent="55534243123456780000000000000011062000000100000000000000000000"

CheckSuccess=20

Czy może ktoś miał podobny problem ?

Pozrawiam
m

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads