Jak te 3 kompy polaczyc ? ppp0 i eth0

Thread View: pl.comp.os.linux.sprzet

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Intruder Mon, 06 Sep 1999 17:26

#200

Author: Intruder
Date: Mon, 06 Sep 1999 17:26

39 lines
1597 bytes

Witam.
Jest problem tego typu:
Komp nr - SERVER - linuxowy (ReHat 6.0): ppp0 i eth0:
- eth0:
IP: 10.102.103.12
B-cast: 10.102.255.255
Mask: 255.255.255.0
Network: 10.102.0.0
- ppp0:
IP: 10.102.101.1
Mask: 255.255.255.255

Komp B - stacja robacza na linuxie Redhat 5.2: ppp0 i eth0:
- eth0:
IP: 10.102.100.3
B-cast: 10.102.255.255
Mask: 255.255.255.0
Network: 10.0.0.0
- ppp0:
IP: 10.102.101.2
Mask: 255.255.255.0

Komp C - stacja robacza RedHat Linux 5.2: eth0 polacze z komp B:
IP: 10.102.100.4
B-cast: 10.102.255.255
Mask: 255.255.255.0
Network: 10.0.0.0

Ustawiam routing na ServerzeA : na podsiec: A i BC, na Kliecie B na
podsiec A i na BC (default na ppp0 do serwera) oraz na kompie C na
podsiec BC i na A....
Ale za nic nie moge zobaczyc kompa C na serverze A i na odwrot .... Co
jest ? nie mam pojecia ...
Moze to chodzi o te Networki .... ze sie nie zgadzaja ? a moze tez o
maski na ppp0 ale ustawialem na jednym maske 255.255.255.0 i nic dalej
255.255.255.255.....
Gdyby ktos mogl mi pomoc ...
Pozdro
Intruder

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads