🚀 go-pugleaf

ein <ein@no.spam> writes:

> md: recovery of RAID array md2
> md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
> md: using maximum available idle IO bandwidth (but not more than 200000
> KB/sec) for recovery.
> md: using 128k window, over a total of 976759936 blocks.
> ata4: EH in SWNCQ mode,QC:qc_active 0x7FFFFFFF sactive 0x7FFFFFFF
> ata4: SWNCQ:qc_active 0x2 defer_bits 0x7FFFFFFD last_issue_tag 0x1
>   dhfis 0x2 dmafis 0x2 sdbfis 0x0
> ata4: ATA_REG 0x40 ERR_REG 0x0
> ata4: tag : dhfis dmafis sdbfis sacitve
> ata4: tag 0x1: 1 1 0 1
> ata4.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6 frozen
> ata4.00: cmd 61/80:00:3f:d6:03/00:00:26:00:00/40 tag 0 ncq 65536 out
>          res 40/00:00:09:4f:c2/00:00:74:00:00/00 Emask 0x4 (timeout)
> ata4.00: status: { DRDY }

SATA - NVidia wczesniejsza niz AHCI?
Jesli tak, to pamietam ze niektore dyski mialy z tym problem
(w polaczeniu z NCQ). Kwestia bledow w firmware dyskow, niektorzy
producenci dyskow mieli na to patche.

Wylacznie NCQ takze powinno pomoc.
-- 
Krzysztof Halasa