🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Thread View: pl.comp.os.linux.sieci
1 messages
1 total messages Started by Krystian Tue, 23 Feb 2016 20:34
OpenVPN (Dostęp do klientów za serwerem_głównym_VPN dla klientów za serverem_klientem_VPN)
#244337
Author: Krystian
Date: Tue, 23 Feb 2016 20:34
39 lines
4324 bytes
Dobry wieczór,

nie wiem co robię Ÿle ale nie "widzę" klientów za serwerem głównym
(serwer01) VPN przez klientów za serwerem klientem (serwer02),

z poziomu serwera (serwer02) pinguję wszystko i wszystko działa
poprawnie, natomiast z klientów (klient_4, klient_5, klient_6) "widzę"
mam dostęp do 10.8.0.1 ale do samego 192.168.0.250 i innych w podsieci
192.168.0.xxx LAN dla serwera_klienta_VPN (serwer02) już nie.

+------------------------------------------------------------------------------------------------------------------------------------------+
| 192.168.0.1                                                                                                                 192.168.14.1 |
| +----------+                                                                                                                +----------+ |
| |          |                                                                                                                |          | |
| | klient_1 | <------+        +----------------------+              VPN             +----------------------+        +------> | klient_4 | |
| |          |        |        |      serwer01        | <--------------------------> |      serwer02        |        |        |          | |
| +----------+        |        |      główny          |                              |      klient          |        |        +----------+ |
|                     |        |       VPN            |                              |       VPN            |        |                     |
| +----------+        |        |                      |eth1      +--------+      eth1|                      |        |        +----------+ |
| |          |        |    eth0|                   WAN| <------> |internet| <----->  |WAN                   |eth0    |        |          | |
| | klient_2 | <--------------->LAN                   |tun0      +--------+      tun0|                   LAN| <-------------> | klient_5 | |
| |          |        |        | internet dla klientów|                              | internet dla klientów|        |        |          | |
| +----------+        |        |      przez NAT       |                              |      przez NAT       |        |        +----------+ |
|                     |        |  10.8.0.1 GW TUN     |                              |                      |        |                     |
| +----------+        |        |  192.168.0.250 GW    |                              |  192.168.14.250 GW   |        |        +----------+ |
| |          |        |        +----------------------+                              +----------------------+        |        |          | |
| | klient_3 | <------+                                                                                              +------> | klient_6 | |
| |          |                                                                                                                |          | |
| +----------+                                                                                                                +----------+ |
+------------------------------------------------------------------------------------------------------------------------------------------+

proszę o pomoc, jak zrobić aby serwer_klient_VPN (serwer02) poprawnie
dawał dostęp dla komputerów w podsieci 192.168.0.xxx

z góry dziękuję,

Pozdrawiam Krystian
(mail_bez_jedynek)
t1es1terr1@o2.pl
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads