🚀 go-pugleaf

Mam stary komputer, P133 na płycie M55Hi-Plus rev. A Dolozylem do niego
dysk, przeinstalowalem debiana 3. Zaczely sie problemy z dyskami podczas
startu systemu - wczesniej tego nie bylo.
fragment /var/log/messages:

 Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
 PIIX3: IDE controller at PCI slot 00:07.1
 PIIX3: chipset revision 0
 PIIX3: not 100%% native mode: will probe irqs later
     ide0: BM-DMA at 0xf4d0-0xf4d7, BIOS settings: hda:DMA, hdb:pio
     ide1: BM-DMA at 0xf4d8-0xf4df, BIOS settings: hdc:DMA, hdd:pio
 hda: WDC AC26400R, ATA DISK drive
 blk: queue c027ab80, I/O limit 4095Mb (mask 0xffffffff)
 hdc: WDC AC24300L, ATA DISK drive
 blk: queue c027afec, I/O limit 4095Mb (mask 0xffffffff)
 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
 ide1 at 0x170-0x177,0x376 on irq 15
 hda: attached ide-disk driver.
 hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
 hda: task_no_data_intr: error=0x04 { DriveStatusError }
 hda: host protected area => 1
 hda: 12594960 sectors (6449 MB) w/512KiB Cache, CHS=13328/15/63, (U)DMA
 hdc: attached ide-disk driver.
 hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
 hdc: task_no_data_intr: error=0x04 { DriveStatusError }
 hdc: host protected area => 1
 hdc: 8421840 sectors (4312 MB) w/256KiB Cache, CHS=8912/15/63, (U)DMA

Mam jadro 2.4.22, oto fragment .config kernela:
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_PIIX=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_IDE_MODES=y

Wczesniej dyski pracowaly w DMA, wlaczelem to przez hdparm.
Ma ktos pomysl skad sie to wzielo?

-- 
Bartosz Konefał
gg: 95233
There are only 10 kinds of people in the world, those who understand binary
and those who do not.