Problem - bridge nie przepuszcza pakietow - Thread - go-pugleaf

Thread View: pl.comp.os.bsd

4 messages

[T] Back to Threads [V] Tree View [G] Group Articles

4 total messages Started by Jaskiniowiec Mon, 25 Jan 2010 12:55

Problem - bridge nie przepuszcza pakietow

#21193

Author: Jaskiniowiec
Date: Mon, 25 Jan 2010 12:55

24 lines
1593 bytes

Witam

Mam problem. Na routerze w bridge spiete xl1 i wlan0(ath0). Wszystko  
ladnie chodzi, ale nie da sie polaczyc z laptopa, ktory wchodzi na ath0,  
do innego kompa na xl1.

Router na FreeBSD 8 + pf.


sysctl -a | grep bridge

net.link.bridge.ipfw: 0
net.link.bridge.inherit_mac: 0
net.link.bridge.log_stp: 0
net.link.bridge.pfil_local_phys: 0
net.link.bridge.pfil_member: 1
net.link.bridge.pfil_bridge: 1
net.link.bridge.ipfw_arp: 0
net.link.bridge.pfil_onlyip: 1

Prosze o podpowiedzi.

-- 
SprzedamTO.pl

Re: Problem - bridge nie przepuszcza pakietow

#21194

Author: Maciej Wierzbicki
Date: Mon, 25 Jan 2010 12:58

11 lines
1205 bytes

Jaskiniowiec wrote on 2010-01-25 13:55:

> Mam problem. Na routerze w bridge spiete xl1 i wlan0(ath0). Wszystko  
> ladnie chodzi, ale nie da sie polaczyc z laptopa, ktory wchodzi na ath0,  
> do innego kompa na xl1.

Pokaż wynik ifconfiga albo odpowiednie wpisy z rc.conf.

-- 
*   Maciej Wierzbicki * At paranoia's poison door  *
*   VOO1-RIPE   *

Re: Problem - bridge nie przepuszcza pakietow

#21195

Author: Jaskiniowiec
Date: Mon, 25 Jan 2010 13:13

68 lines
4225 bytes

Dnia 25-01-2010 o 13:58:35 Maciej Wierzbicki <voovoos@kis.p.lodz.pl>  
napisał(a):

> Jaskiniowiec wrote on 2010-01-25 13:55:
>
>> Mam problem. Na routerze w bridge spiete xl1 i wlan0(ath0). Wszystko   
>> ladnie chodzi, ale nie da sie polaczyc z laptopa, ktory wchodzi na  
>> ath0,  do innego kompa na xl1.
>
> Pokaż wynik ifconfiga albo odpowiednie wpisy z rc.conf.
>

ifconfig
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
         options=9<RXCSUM,VLAN_MTU>
         ether 00:11:22:33:44:00
         inet XX.XX.XX.XX netmask 0xfffffff8 broadcast XX.XX.XX.XX
	...
         media: Ethernet autoselect (100baseTX <full-duplex>)
         status: active
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
         ether 00:11:22:33:44:11
         media: IEEE 802.11 Wireless Ethernet autoselect mode 11a <hostap>
         status: running
xl1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0  
mtu 150                                              0
         options=9<RXCSUM,VLAN_MTU>
         ether 00:11:22:33:44:22
         media: Ethernet autoselect (100baseTX <full-duplex>)
         status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
         options=3<RXCSUM,TXCSUM>
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
         inet6 ::1 prefixlen 128
         inet 127.0.0.1 netmask 0xff000000
pfsync0: flags=0<> metric 0 mtu 1460
         syncpeer: 224.0.0.240 maxupd: 128
pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33200
vboxnet0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
         ether 00:11:22:33:44:33
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu  
1500
         ether 00:11:22:33:44:44
         inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255
         ...
         inet 10.100.100.1 netmask 0xffffff00 broadcast 10.100.100.255
         id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
         maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200
         root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
         member: wlan0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                 ifmaxaddr 0 port 9 priority 128 path cost 370370
         member: xl1 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                 ifmaxaddr 0 port 3 priority 128 path cost 200000
wlan0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0  
mtu 1                                              500
         ether 00:11:22:33:44:55
         media: IEEE 802.11 Wireless Ethernet autoselect mode 11a <hostap>
         status: running
         ssid wlan channel 120 (5600 Mhz 11a) bssid 00:11:22:33:44:66
         regdomain 55 indoor ecm authmode OPEN privacy OFF txpower 22.5
         mcastrate 6 mgmtrate 6 scanvalid 60 wme burst hidessid dtimperiod 1
         -dfs
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> metric 0 mtu 1500
         inet 192.168.128.1 --> 192.168.128.2 netmask 0xffffffff
         Opened by PID 1590

-- 
SprzedamTO.pl

Re: Problem - bridge nie przepuszcza pakietow

#21196

Author: jurajski Jaskiniowiec
Date: Wed, 03 Feb 2010 19:44

35 lines
1814 bytes

Dnia 25-01-2010 o 13:55:50 Jaskiniowiec <"dziki_facet_22<"@_wp.pl>  
napisał(a):

> Witam
>
> Mam problem. Na routerze w bridge spiete xl1 i wlan0(ath0). Wszystko  
> ladnie chodzi, ale nie da sie polaczyc z laptopa, ktory wchodzi na ath0,  
> do innego kompa na xl1.
>
> Router na FreeBSD 8 + pf.
>
>
> sysctl -a | grep bridge
>
> net.link.bridge.ipfw: 0
> net.link.bridge.inherit_mac: 0
> net.link.bridge.log_stp: 0
> net.link.bridge.pfil_local_phys: 0
> net.link.bridge.pfil_member: 1
> net.link.bridge.pfil_bridge: 1
> net.link.bridge.ipfw_arp: 0
> net.link.bridge.pfil_onlyip: 1
>
> Prosze o podpowiedzi.
>

Problem rozwiazany.


net.link.bridge.pfil_member 1 -> 0



-- 
SprzedamTO.pl

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads