FBSD 7.1 - IP_ADD_MEMBERSHIP ALLHOSTS - Thread - go-pugleaf

Thread View: pl.comp.os.bsd

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Dexter-Labolatory Thu, 28 May 2009 17:08

FBSD 7.1 - IP_ADD_MEMBERSHIP ALLHOSTS

#20927

Author: Dexter-Labolatory
Date: Thu, 28 May 2009 17:08

55 lines
2988 bytes

Witam,

mam takie bledy w messages

# grep routed /var/log/messages
May 28 17:02:14 fw routed[629]: IP_ADD_MEMBERSHIP ALLHOSTS: Invalid argument
May 28 17:02:14 fw routed[629]: IP_ADD_MEMBERSHIP ALLHOSTS: Invalid argument
May 28 17:55:27 fw routed[629]: IP_ADD_MEMBERSHIP ALLHOSTS: Invalid argument
May 28 17:55:27 fw routed[629]: setsockopt(IP_ADD_MEMBERSHIP RIP): Invalid 
argument
May 28 17:55:27 fw routed[629]: IP_ADD_MEMBERSHIP ALLHOSTS: Invalid argument
May 28 17:55:27 fw routed[629]: setsockopt(IP_ADD_MEMBERSHIP RIP): Invalid 
argument


Problem polega na tym, ze gdy powyzsze bledy sa generowane nagle przestaja 
dzialac interfejsy (nie dziala np. ping na xl0 i xl1 / nie mozna sie 
zalogowac do serwera itp)
czasem samo sie odblokuje, chyba ze recznie zrobie "/etc/netstart"  to na 
chwile znowu dziala

Mam 2x 3COM obslugujace dwie rozne sieci (w jednej fizycznej)
Problem wystapił po dolozeniu do serwera drugiej karty sieciowej.

Zauwazylem dziwna rzecz; gdy wypne kabel z "xl1"    to i tak pinguja sie 
obie karty... nie rozumiem tego.
Cos mam zle w konfiguracji ?  Moze to wina kart sieciowych ?

rc.conf
ifconfig_xl0="inet 192.168.0.1 netmask 255.255.255.0"
ifconfig_xl1="inet 172.16.15.1 netmask 255.255.255.0"

xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xd100-0xd13f irq 19 at device 
1.0 on pci4
xl0: Ethernet address: 00:10:4b:36:6e:a2

xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xd200-0xd27f mem 
0xfa001000-0xfa00107f irq 18 at device 2.0 on pci4
xl1: Ethernet address: 00:04:75:c0:4d:ac


# ifconfig
[...]
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8<VLAN_MTU>
        ether 00:10:4b:36:6e:a2
        inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
xl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=9<RXCSUM,VLAN_MTU>
        ether 00:04:75:c0:4d:ac
        inet 172.16.15.1 netmask 0xffffff00 broadcast 172.16.15.255
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active

Re: FBSD 7.1 - IP_ADD_MEMBERSHIP ALLHOSTS

#20928

Author: Dexter-Labolatory
Date: Fri, 29 May 2009 12:46

22 lines
1625 bytes

Użytkownik "Dexter-Labolatory" <dexter-labolatory@wp.pl> napisał:
 w wiadomości news:gvmgdq$jc$1@news.task.gda.pl...
> Witam,
>
> mam takie bledy w messages
>
> # grep routed /var/log/messages
> May 28 17:02:14 fw routed[629]: IP_ADD_MEMBERSHIP ALLHOSTS: Invalid 
> argument
> May 28 17:02:14 fw routed[629]: IP_ADD_MEMBERSHIP ALLHOSTS: Invalid 
> argument
> May 28 17:55:27 fw routed[629]: IP_ADD_MEMBERSHIP ALLHOSTS: Invalid 
> argument
> May 28 17:55:27 fw routed[629]: setsockopt(IP_ADD_MEMBERSHIP RIP): Invalid 
> argument
> May 28 17:55:27 fw routed[629]: IP_ADD_MEMBERSHIP ALLHOSTS: Invalid 
> argument
> May 28 17:55:27 fw routed[629]: setsockopt(IP_ADD_MEMBERSHIP RIP): Invalid 
> argument

wymiana kart sieciowych pomogla

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads