🚀 go-pugleaf

Dnia 14-02-2009 o 16:36:33 Norbi <norbertn_ihatespam_@post.pl_withoutspam>  
napisał(a):

> ... albo wymusic wyswietlanie czasu w CET?
>
> teraz mam tak
>
> # date
> Sat Feb 14 16:33:24 CET 2009
> # jexec 36 date
> Sat Feb 14 15:33:33 UTC 2009
>
>
> a chcialbym zeby jail rowniez pokazywal czas w CET
>
> Nie udalo mi sie tego zrobic, ale moze po prostu nie wiem jak.
> Da sie?

W man do jail (8) masz napisane jak sie jaila konfiguruje:

[...]
Configuring the Jail
      Start any jail for the first time without configuring the network  
inter-
      face so that you can clean it up a little and set up accounts.  As  
with
      any machine (virtual or not) you will need to set a root password,  
time
      zone, etc.  Some of these steps apply only if you intend to run a full
      virtual server inside the jail; others apply both for constraining a  
par-
      ticular application or for running a virtual server.

      Start a shell in the jail:

            jail /data/jail/192.0.2.100 testhostname 192.0.2.100 /bin/sh

      Assuming no errors, you will end up with a shell prompt within the  
jail.
      You can now run /usr/sbin/sysinstall and do the post-install  
configura-
      tion to set various configuration options, or perform these actions  
manu-
      ally by editing /etc/rc.conf, etc.

            o   Create an empty /etc/fstab to quell startup warnings about
                missing fstab (virtual server only)
            o   Disable the port mapper (/etc/rc.conf: rpcbind_enable="NO")
                (virtual server only)
            o   Configure /etc/resolv.conf so that name resolution within  
the
                jail will work correctly
            o   Run newaliases(1) to quell sendmail(8) warnings.
            o   Disable interface configuration to quell startup warnings  
about
                ifconfig(8) (network_interfaces="") (virtual server only)
            o   Set a root password, probably different from the real host  
sys-
                tem
            o   Set the timezone
            o   Add accounts for users in the jail environment
            o   Install any packages the environment requires

      You may also want to perform any package-specific configuration (web
      servers, SSH servers, etc), patch up /etc/syslog.conf so it logs as  
you
      would like, etc.  If you are not using a virtual server, you may wish  
to
      modify syslogd(8) in the host environment to listen on the syslog  
socket
      in the jail environment; in this example, the syslog socket would be
      stored in /data/jail/192.0.2.100/var/run/log.

      Exit from the shell, and the jail will be shut down.
[...]


Co do samej strefy jeśli chcesz na szybko to:

cp /usr/share/zoneinfo/Europe/Warsaw /tam_gdzie_masz_jaila/etc/localtime


>
> Pozdrawiam
> Norbert

Pozdrawiam.

-- 
Marek Krawczyk

> Co do samej strefy jeśli chcesz na szybko to:
>
> cp /usr/share/zoneinfo/Europe/Warsaw /tam_gdzie_masz_jaila/etc/localtime

Dzieki,
na to wpadlem juz wczesniej, niestety tak nie dziala :-(
moze przyczyna jest to ze jailami zarzadzam przy pomocy ezjail

Pozdrawiam
Norbert 

Cos jednak musialem robic inaczej,
Postanowilem zrobic to co napisales ... i dziala,
dziekuje

Pozdrawiam
Norbert