🚀 go-pugleaf

Marcin Swietochowski <dragon@usun-to-selinet.pl> wrote:
> Witam
> 
> Robie wlasnie nowa maszynke.
> Poniewaz musi byc to cos niedrogiego, szukam rozwiazania
> na ataraid, poniewaz plytki z promise sa na wymarciu,
> chcialbym sie zorientowac jak wyglada obecnie wsparcie
> dla sil 3114 (SATA)
> ktory z kolei jest montowany dosc czesto

Z tego co mówił Soren, 3114 jest już ok (w przeciwieństwie do 3112).
Przy konfiguracji poniżej nie mam z nim żadnych problemów jak na razie:

atapci1: <nVidia nForce4 SATA150 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xc400-0xc40f mem 0xfa002000-0xfa002fff irq 21 at device 7.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce4 SATA150 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xd800-0xd80f mem 0xfa003000-0xfa003fff irq 22 at device 8.0 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
atapci3: <SiI 3114 SATA150 controller> port 0x7400-0x7407,0x7800-0x7803,0x7c00-0x7c07,0x8000-0x8003,0x8400-0x840f mem 0xf5104000-0xf51043ff irq 17 at device 9.0 on pci1
ata6: <ATA channel 0> on atapci3
ata7: <ATA channel 1> on atapci3
ata8: <ATA channel 2> on atapci3
ata9: <ATA channel 3> on atapci3

ad0: 152627MB <Seagate ST3160827AS 3.42> at ata2-master SATA150
ad1: 152627MB <Seagate ST3160827AS 3.42> at ata3-master SATA150
ad2: 152627MB <Seagate ST3160827AS 3.42> at ata6-master SATA150
ad3: 152627MB <Seagate ST3160827AS 3.42> at ata7-master SATA150
ad4: 152627MB <Seagate ST3160827AS 3.42> at ata8-master SATA150

RAID robię na:

GEOM_MIRROR: Device root created (id=1951101010).
GEOM_MIRROR: Device root: provider ad0s1a detected.
GEOM_RAID3: Device data created (id=8).
GEOM_RAID3: Device data: provider ad0s1d detected.
GEOM_RAID3: Device usr created (id=8).
GEOM_RAID3: Device usr: provider ad1s1a detected.
GEOM_RAID3: Device data: provider ad1s1d detected.
GEOM_MIRROR: Device root: provider ad2s1a detected.
GEOM_MIRROR: Device root: provider ad0s1a activated.
GEOM_MIRROR: Device root: provider ad2s1a activated.
GEOM_MIRROR: Device root: provider mirror/root launched.
GEOM_RAID3: Device data: provider ad2s1d detected.
GEOM_RAID3: Device usr: provider ad3s1a detected.
GEOM_RAID3: Device data: provider ad3s1d detected.
GEOM_RAID3: Device usr: provider ad4s1a detected.
GEOM_RAID3: Device usr: provider ad1s1a activated.
GEOM_RAID3: Device usr: provider ad3s1a activated.
GEOM_RAID3: Device usr: provider ad4s1a activated.
GEOM_RAID3: Device usr: provider raid3/usr launched.
GEOM_RAID3: Device data: provider ad4s1d detected.
GEOM_RAID3: Device data: provider ad0s1d activated.
GEOM_RAID3: Device data: provider ad1s1d activated.
GEOM_RAID3: Device data: provider ad2s1d activated.
GEOM_RAID3: Device data: provider ad3s1d activated.
GEOM_RAID3: Device data: provider ad4s1d activated.
GEOM_RAID3: Device data: provider raid3/data launched.

Chociaż to jest 6-CURRENT i z tego co pamiętam ata-mkIII jest od 6.x,
więc jak to jest w 5.x nie wiem.

-- 
Pawel Jakub Dawidek                       http://www.wheel.pl
pjd@FreeBSD.org                           http://www.FreeBSD.org
FreeBSD committer                         Am I Evil? Yes, I Am!