🚀 go-pugleaf

Witam!
Mam problem z podmontowaniem partycji stworzonej w OpenBSD (4.5) pod FreeBSD 
(8.0).
dmesg wyrzuca problem z geometrią:
ad2: 76319MB <WDC WD800JB-00JJC0 05.01C05> at ata1-master UDMA100
GEOM: ad2: geometry does not match label (240h,63s != 16h,63s).

fdisk podaje takie info:
bolek# fdisk  /dev/ad2
******* Working on device /dev/ad2 *******
parameters extracted from in-core disklabel are:
cylinders=155061 heads=16 sectors/track=63 (1008 blks/cyl)

Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=155061 heads=16 sectors/track=63 (1008 blks/cyl)

Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
<UNUSED>
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
sysid 166 (0xa6),(OpenBSD)
    start 63, size 156295377 (76316 Meg), flag 80 (active)
        beg: cyl 0/ head 1/ sector 1;
        end: cyl 1023/ head 239/ sector 63

ls /dev/ad2*
zwraca tylko /dev/ad2, bez żadnych slice'ów itp.
Co mogę z tym teraz zrobić?