🚀 go-pugleaf

> U mnie wygląda to tak na Dl380  g3 freebsd 8.0 :
> Raid 5
>
> [root@]# diskinfo -t /dev/da0s1f
> [..]
> Seek times:
>         Full stroke:      250 iter in   1.078469 sec =    4.314 msec
>         Half stroke:      250 iter in   1.493907 sec =    5.976 msec
>         Quarter stroke:   500 iter in   3.211992 sec =    6.424 msec
>         Short forward:    400 iter in   1.763298 sec =    4.408 msec
>         Short backward:   400 iter in   1.582091 sec =    3.955 msec
>         Seq outer:       2048 iter in   0.391394 sec =    0.191 msec
>         Seq inner:       2048 iter in   0.404128 sec =    0.197 msec
> Transfer rates:
>         outside:       102400 kbytes in   1.703714 sec =    60104
> kbytes/sec
>         middle:        102400 kbytes in   1.766950 sec =    57953
> kbytes/sec
>         inside:        102400 kbytes in   1.768755 sec =    57894
> kbytes/sec

RAID0 na dwóch IBM 320 36GB

Seek times:
        Full stroke:      250 iter in   1.006373 sec =    4.025 msec
        Half stroke:      250 iter in   0.995101 sec =    3.980 msec
        Quarter stroke:   500 iter in   3.756827 sec =    7.514 msec
        Short forward:    400 iter in   1.903735 sec =    4.759 msec
        Short backward:   400 iter in   1.096342 sec =    2.741 msec
        Seq outer:       2048 iter in   0.428624 sec =    0.209 msec
        Seq inner:       2048 iter in   0.423368 sec =    0.207 msec
Transfer rates:
        outside:       102400 kbytes in   1.219702 sec =    83955
kbytes/sec
        middle:        102400 kbytes in   1.264257 sec =    80996
kbytes/sec
        inside:        102400 kbytes in   1.022859 sec =   100112
kbytes/sec

Pytanie dodatkowe dlaczego ten raid wykrywa jako SCSI-0, SCSI-4,
SCSI-5 w różnych systemach?