🚀 go-pugleaf

taki niemiły komunikat pojawił mi się przy wykonywaniu zapytania.
rzeczywiscie mam tylko 1 GB ramu, ale w menedżeże zadań
nie wyglądało to tragicznie. wrzucam log, może ktoś domysli się o co
chodzi ?
System: WinXP, Postgres 8.4,

-----------------------------------------------------------------------
LOG:  database system was shut down at 2009-07-06 14:13:34 CEST
LOG:  database system is ready to accept connections
TopMemoryContext: 33006232 total in 4029 blocks; 68016 free (4029
chunks); 32938216 used
  Type information cache: 8192 total in 1 blocks; 1800 free (0
chunks); 6392 used
  TopTransactionContext: 24576 total in 2 blocks; 12432 free (2
chunks); 12144 used
    Combo CIDs: 8192 total in 1 blocks; 4936 free (0 chunks); 3256
used
  CFuncHash: 8192 total in 1 blocks; 4936 free (0 chunks); 3256 used
  Operator class cache: 8192 total in 1 blocks; 3848 free (0 chunks);
4344 used
  Operator lookup cache: 24576 total in 2 blocks; 14072 free (6
chunks); 10504 used
  MessageContext: 65536 total in 4 blocks; 43192 free (12 chunks);
22344 used
  smgr relation table: 8192 total in 1 blocks; 760 free (0 chunks);
7432 used
  TransactionAbortContext: 32768 total in 1 blocks; 32752 free (0
chunks); 16 used
  Portal hash: 8192 total in 1 blocks; 3912 free (0 chunks); 4280 used
  PortalMemory: 8192 total in 1 blocks; 8040 free (0 chunks); 152 used
    PortalHeapMemory: 1024 total in 1 blocks; 936 free (0 chunks); 88
used
      ExecutorState: 57344 total in 3 blocks; 29496 free (13 chunks);
27848 used
        TupleSort: 18311088 total in 72 blocks; 10594272 free (75910
chunks); 7716816 used
        ExprContext: 8192 total in 1 blocks; 8176 free (0 chunks); 16
used
        AggContext: 0 total in 0 blocks; 0 free (0 chunks); 0 used
          accumArrayResult: 0 total in 0 blocks; 0 free (0 chunks); 0
used
          accumArrayResult: 8192 total in 1 blocks; 7760 free (0
chunks); 432 used
          accumArrayResult: 8192 total in 1 blocks; 7784 free (0
chunks); 408 used
          accumArrayResult: 8192 total in 1 blocks; 7784 free (0
chunks); 408 used
          accumArrayResult: 8192 total in 1 blocks; 7760 free (0
chunks); 432 used
<cut>

tu ok 20MB takich linijek jw. koniec jest następujący:

          accumArrayResult: 8192 total in 1 blocks; 7784 free (0
chunks); 408 used
          accumArrayResult: 8192 total in 1 blocks; 7760 free (0
chunks); 432 used
          accumArrayResult: 8192 total in 1 blocks; 7784 free (0
chunks); 408 used
          accumArrayResult: 8192 total in 1 blocks; 7784 free (0
chunks); 408 used
          accumArrayResult: 8192 total in 1 blocks; 7760 free (0
chunks); 432 used
        ExprContext: 8192 total in 1 blocks; 8176 free (0 chunks); 16
used
        ExprContext: 0 total in 0 blocks; 0 free (0 chunks); 0 used
  Relcache by OID: 8192 total in 1 blocks; 2856 free (0 chunks); 5336
used
  CacheMemoryContext: 667696 total in 20 blocks; 164304 free (5
chunks); 503392 used
    pg_toast_68474_index: 1024 total in 1 blocks; 280 free (0 chunks);
744 used
    pg_shdepend_reference_index: 1024 total in 1 blocks; 240 free (0
chunks); 784 used
    pg_depend_depender_index: 1024 total in 1 blocks; 152 free (0
chunks); 872 used
    pg_depend_reference_index: 1024 total in 1 blocks; 152 free (0
chunks); 872 used
    fki_hash_1: 1024 total in 1 blocks; 344 free (0 chunks); 680 used
    NR_EWID_3: 1024 total in 1 blocks; 344 free (0 chunks); 680 used
    MATRIX_4: 1024 total in 1 blocks; 344 free (0 chunks); 680 used
    pg_database_datname_index: 1024 total in 1 blocks; 344 free (0
chunks); 680 used
    pg_index_indrelid_index: 1024 total in 1 blocks; 304 free (0
chunks); 720 used
    pg_opclass_am_name_nsp_index: 1024 total in 1 blocks; 152 free (0
chunks); 872 used
    pg_foreign_data_wrapper_name_index: 1024 total in 1 blocks; 344
free (0 chunks); 680 used
    pg_enum_oid_index: 1024 total in 1 blocks; 344 free (0 chunks);
680 used
    pg_class_relname_nsp_index: 1024 total in 1 blocks; 240 free (0
chunks); 784 used
    pg_foreign_server_oid_index: 1024 total in 1 blocks; 344 free (0
chunks); 680 used
    pg_statistic_relid_att_index: 1024 total in 1 blocks; 240 free (0
chunks); 784 used
    pg_cast_source_target_index: 1024 total in 1 blocks; 240 free (0
chunks); 784 used
    pg_language_name_index: 1024 total in 1 blocks; 344 free (0
chunks); 680 used
    pg_authid_oid_index: 1024 total in 1 blocks; 304 free (0 chunks);
720 used
    pg_amop_fam_strat_index: 1024 total in 1 blocks; 88 free (0
chunks); 936 used
    pg_index_indexrelid_index: 1024 total in 1 blocks; 304 free (0
chunks); 720 used
    pg_ts_template_tmplname_index: 1024 total in 1 blocks; 280 free (0
chunks); 744 used
    pg_ts_config_map_index: 1024 total in 1 blocks; 192 free (0
chunks); 832 used
    pg_opclass_oid_index: 1024 total in 1 blocks; 304 free (0 chunks);
720 used
    pg_foreign_data_wrapper_oid_index: 1024 total in 1 blocks; 344
free (0 chunks); 680 used
    pg_auth_members_member_role_index: 1024 total in 1 blocks; 280
free (0 chunks); 744 used
    pg_ts_dict_oid_index: 1024 total in 1 blocks; 344 free (0 chunks);
680 used
    pg_conversion_default_index: 1024 total in 1 blocks; 88 free (0
chunks); 936 used
    pg_operator_oprname_l_r_n_index: 1024 total in 1 blocks; 88 free
(0 chunks); 936 used
    pg_trigger_tgrelid_tgname_index: 1024 total in 1 blocks; 240 free
(0 chunks); 784 used
    pg_enum_typid_label_index: 1024 total in 1 blocks; 280 free (0
chunks); 744 used
    pg_ts_config_oid_index: 1024 total in 1 blocks; 344 free (0
chunks); 680 used
    pg_user_mapping_oid_index: 1024 total in 1 blocks; 344 free (0
chunks); 680 used
    pg_opfamily_am_name_nsp_index: 1024 total in 1 blocks; 192 free (0
chunks); 832 used
    pg_type_oid_index: 1024 total in 1 blocks; 304 free (0 chunks);
720 used
    pg_aggregate_fnoid_index: 1024 total in 1 blocks; 304 free (0
chunks); 720 used
    pg_constraint_oid_index: 1024 total in 1 blocks; 344 free (0
chunks); 680 used
    pg_rewrite_rel_rulename_index: 1024 total in 1 blocks; 280 free (0
chunks); 744 used
    pg_ts_parser_prsname_index: 1024 total in 1 blocks; 280 free (0
chunks); 744 used
    pg_ts_config_cfgname_index: 1024 total in 1 blocks; 280 free (0
chunks); 744 used
    pg_ts_parser_oid_index: 1024 total in 1 blocks; 344 free (0
chunks); 680 used
    pg_operator_oid_index: 1024 total in 1 blocks; 304 free (0
chunks); 720 used
    pg_namespace_nspname_index: 1024 total in 1 blocks; 304 free (0
chunks); 720 used
    pg_ts_template_oid_index: 1024 total in 1 blocks; 344 free (0
chunks); 680 used
    pg_amop_opr_fam_index: 1024 total in 1 blocks; 240 free (0
chunks); 784 used
    pg_ts_dict_dictname_index: 1024 total in 1 blocks; 280 free (0
chunks); 744 used
    pg_auth_members_role_member_index: 1024 total in 1 blocks; 280
free (0 chunks); 744 used
    pg_type_typname_nsp_index: 1024 total in 1 blocks; 240 free (0
chunks); 784 used
    pg_opfamily_oid_index: 1024 total in 1 blocks; 344 free (0
chunks); 680 used
    pg_class_oid_index: 1024 total in 1 blocks; 304 free (0 chunks);
720 used
    pg_proc_proname_args_nsp_index: 1024 total in 1 blocks; 152 free
(0 chunks); 872 used
    pg_attribute_relid_attnum_index: 1024 total in 1 blocks; 240 free
(0 chunks); 784 used
    pg_proc_oid_index: 1024 total in 1 blocks; 304 free (0 chunks);
720 used
    pg_language_oid_index: 1024 total in 1 blocks; 344 free (0
chunks); 680 used
    pg_namespace_oid_index: 1024 total in 1 blocks; 344 free (0
chunks); 680 used
    pg_database_oid_index: 1024 total in 1 blocks; 304 free (0
chunks); 720 used
    pg_amproc_fam_proc_index: 1024 total in 1 blocks; 88 free (0
chunks); 936 used
    pg_authid_rolname_index: 1024 total in 1 blocks; 304 free (0
chunks); 720 used
    pg_foreign_server_name_index: 1024 total in 1 blocks; 344 free (0
chunks); 680 used
    pg_attribute_relid_attnam_index: 1024 total in 1 blocks; 240 free
(0 chunks); 784 used
    pg_conversion_oid_index: 1024 total in 1 blocks; 344 free (0
chunks); 680 used
    pg_user_mapping_user_server_index: 1024 total in 1 blocks; 280
free (0 chunks); 744 used
    pg_conversion_name_nsp_index: 1024 total in 1 blocks; 280 free (0
chunks); 744 used
  MdSmgr: 8192 total in 1 blocks; 7552 free (1 chunks); 640 used
  LOCALLOCK hash: 8192 total in 1 blocks; 3912 free (0 chunks); 4280
used
  Timezones: 79320 total in 2 blocks; 5968 free (0 chunks); 73352 used
  ErrorContext: 8192 total in 1 blocks; 8176 free (0 chunks); 16 used
ERROR:  out of memory
DETAIL:  Failed on request of size 28.
STATEMENT:  create table matrix.packed as
	SELECT
	    substr("NR_EWID"::text,1,10) as "PREFIX_EWID"
	  , array_agg("NR_EWID") "NR_EWID"
	  , array_agg("MATRIX") "MATRIX"
	  , "PLIK_HASH"
	  , "OPERATOR"
	  , array_agg("FAKTURA") as "FAKTURA"
	  FROM matrix."all"
	  GROUP BY substr("NR_EWID"::text,1,10),"PLIK_HASH", "OPERATOR";


wrzucam jeszcz konfig:


# -----------------------------
# PostgreSQL configuration file
# -----------------------------
#
# This file consists of lines of the form:
#
#   name = value
#
# (The "=" is optional.)  Whitespace may be used.  Comments are
introduced with
# "#" anywhere on a line.  The complete list of parameter names and
allowed
# values can be found in the PostgreSQL documentation.
#
# The commented-out settings shown in this file represent the default
values.
# Re-commenting a setting is NOT sufficient to revert it to the
default value;
# you need to reload the server.
#
# This file is read on server startup and when the server receives a
SIGHUP
# signal.  If you edit the file on a running system, you have to
SIGHUP the
# server for the changes to take effect, or use "pg_ctl reload".  Some
# parameters, which are marked below, require a server shutdown and
restart to
# take effect.
#
# Any parameter can also be given as a command-line option to the
server, e.g.,
# "postgres -c log_connections=on".  Some parameters can be changed at
run time
# with the "SET" SQL command.
#
# Memory units:  kB = kilobytes        Time units:  ms  = milliseconds
#                MB = megabytes                     s   = seconds
#                GB = gigabytes                     min = minutes
#                                                   h   = hours
#                                                   d   = days


#------------------------------------------------------------------------------
# FILE LOCATIONS
#------------------------------------------------------------------------------

# The default values of these variables are driven from the -D command-
line
# option or PGDATA environment variable, represented here as
ConfigDir.

#data_directory = 'ConfigDir'		# use data in another directory
					# (change requires restart)
#hba_file = 'ConfigDir/pg_hba.conf'	# host-based authentication file
					# (change requires restart)
#ident_file = 'ConfigDir/pg_ident.conf'	# ident configuration file
					# (change requires restart)

# If external_pid_file is not explicitly set, no extra PID file is
written.
#external_pid_file = '(none)'		# write an extra PID file
					# (change requires restart)


#------------------------------------------------------------------------------
# CONNECTIONS AND AUTHENTICATION
#------------------------------------------------------------------------------

# - Connection Settings -

#listen_addresses = 'localhost'		# what IP address(es) to listen on;
					# comma-separated list of addresses;
					# defaults to 'localhost', '*' = all
					# (change requires restart)
#port = 5432				# (change requires restart)
max_connections = 100			# (change requires restart)
# Note:  Increasing max_connections costs ~400 bytes of shared memory
per
# connection slot, plus lock space (see max_locks_per_transaction).
#superuser_reserved_connections = 3	# (change requires restart)
#unix_socket_directory = ''		# (change requires restart)
#unix_socket_group = ''			# (change requires restart)
#unix_socket_permissions = 0777		# begin with 0 to use octal notation
					# (change requires restart)
#bonjour_name = ''			# defaults to the computer name
					# (change requires restart)

# - Security and Authentication -

#authentication_timeout = 1min		# 1s-600s
#ssl = off				# (change requires restart)
#ssl_ciphers = 'ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH'	# allowed SSL
ciphers
					# (change requires restart)
#password_encryption = on
#db_user_namespace = off

# Kerberos and GSSAPI
#krb_server_keyfile = ''
#krb_srvname = 'postgres'		# (Kerberos only)
#krb_caseins_users = off

# - TCP Keepalives -
# see "man 7 tcp" for details

#tcp_keepalives_idle = 0		# TCP_KEEPIDLE, in seconds;
					# 0 selects the system default
#tcp_keepalives_interval = 0		# TCP_KEEPINTVL, in seconds;
					# 0 selects the system default
#tcp_keepalives_count = 0		# TCP_KEEPCNT;
					# 0 selects the system default


#------------------------------------------------------------------------------
# RESOURCE USAGE (except WAL)
#------------------------------------------------------------------------------

# - Memory -

shared_buffers = 64MB			# min 128kB
					# (change requires restart)
temp_buffers = 16MB			# min 800kB
#max_prepared_transactions = 0		# zero disables the feature
					# (change requires restart)
# Note:  Increasing max_prepared_transactions costs ~600 bytes of
shared memory
# per transaction slot, plus lock space (see
max_locks_per_transaction).
# It is not advisable to set max_prepared_transactions nonzero unless
you
# actively intend to use prepared transactions.
work_mem = 8MB				# min 64kB
#maintenance_work_mem = 16MB		# min 1MB
#max_stack_depth = 2MB			# min 100kB

# - Kernel Resource Usage -

#max_files_per_process = 1000		# min 25
					# (change requires restart)
#shared_preload_libraries = ''		# (change requires restart)

# - Cost-Based Vacuum Delay -

#vacuum_cost_delay = 0ms		# 0-100 milliseconds
#vacuum_cost_page_hit = 1		# 0-10000 credits
#vacuum_cost_page_miss = 10		# 0-10000 credits
#vacuum_cost_page_dirty = 20		# 0-10000 credits
#vacuum_cost_limit = 200		# 1-10000 credits

# - Background Writer -

#bgwriter_delay = 200ms			# 10-10000ms between rounds
#bgwriter_lru_maxpages = 100		# 0-1000 max buffers written/round
#bgwriter_lru_multiplier = 2.0		# 0-10.0 multipler on buffers scanned/
round

# - Asynchronous Behavior -

#effective_io_concurrency = 1		# 1-1000. 0 disables prefetching


#------------------------------------------------------------------------------
# WRITE AHEAD LOG
#------------------------------------------------------------------------------

# - Settings -

#fsync = off				# turns forced synchronization on or off
#synchronous_commit = on		# immediate fsync at commit
#wal_sync_method = fsync		# the default is the first option
					# supported by the operating system:
					#   open_datasync
					#   fdatasync
					#   fsync
					#   fsync_writethrough
					#   open_sync
#full_page_writes = on			# recover from partial page writes
wal_buffers = 256kB			# min 32kB
					# (change requires restart)
wal_writer_delay = 500ms		# 1-10000 milliseconds

#commit_delay = 0			# range 0-100000, in microseconds
#commit_siblings = 5			# range 1-1000

# - Checkpoints -

checkpoint_segments = 20		# in logfile segments, min 1, 16MB each
#checkpoint_timeout = 5min		# range 30s-1h
#checkpoint_completion_target = 0.5	# checkpoint target duration, 0.0
- 1.0
#checkpoint_warning = 30s		# 0 disables

# - Archiving -

#archive_mode = off		# allows archiving to be done
				# (change requires restart)
#archive_command = ''		# command to use to archive a logfile segment
#archive_timeout = 0		# force a logfile segment switch after this
				# number of seconds; 0 disables


#------------------------------------------------------------------------------
# QUERY TUNING
#------------------------------------------------------------------------------

# - Planner Method Configuration -

#enable_bitmapscan = on
#enable_hashagg = on
#enable_hashjoin = on
#enable_indexscan = on
#enable_mergejoin = on
#enable_nestloop = on
#enable_seqscan = on
#enable_sort = on
#enable_tidscan = on

# - Planner Cost Constants -

#seq_page_cost = 1.0			# measured on an arbitrary scale
#random_page_cost = 4.0			# same scale as above
#cpu_tuple_cost = 0.01			# same scale as above
#cpu_index_tuple_cost = 0.005		# same scale as above
#cpu_operator_cost = 0.0025		# same scale as above
#effective_cache_size = 128MB

# - Genetic Query Optimizer -

#geqo = on
#geqo_threshold = 12
#geqo_effort = 5			# range 1-10
#geqo_pool_size = 0			# selects default based on effort
#geqo_generations = 0			# selects default based on effort
#geqo_selection_bias = 2.0		# range 1.5-2.0

# - Other Planner Options -

#default_statistics_target = 100	# range 1-10000
#constraint_exclusion = partition	# on, off, or partition
#cursor_tuple_fraction = 0.1		# range 0.0-1.0
#from_collapse_limit = 8
#join_collapse_limit = 8		# 1 disables collapsing of explicit
					# JOIN clauses


#------------------------------------------------------------------------------
# ERROR REPORTING AND LOGGING
#------------------------------------------------------------------------------

# - Where to Log -

#log_destination = 'stderr'		# Valid values are combinations of
					# stderr, csvlog, syslog and eventlog,
					# depending on platform.  csvlog
					# requires logging_collector to be on.

# This is used when logging to stderr:
logging_collector = on			# Enable capturing of stderr and csvlog
					# into log files. Required to be on for
					# csvlogs.
					# (change requires restart)

# These are only used if logging_collector is on:
#log_directory = 'pg_log'		# directory where log files are written,
					# can be absolute or relative to PGDATA
#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log'	# log file name
pattern,
					# can include strftime() escapes
#log_truncate_on_rotation = off		# If on, an existing log file of the
					# same name as the new log file will be
					# truncated rather than appended to.
					# But such truncation only occurs on
					# time-driven rotation, not on restarts
					# or size-driven rotation.  Default is
					# off, meaning append to existing files
					# in all cases.
#log_rotation_age = 1d			# Automatic rotation of logfiles will
					# happen after that time.  0 disables.
#log_rotation_size = 10MB		# Automatic rotation of logfiles will
					# happen after that much log output.
					# 0 disables.

# These are relevant when logging to syslog:
#syslog_facility = 'LOCAL0'
#syslog_ident = 'postgres'


# - When to Log -

#client_min_messages = notice		# values in order of decreasing detail:
					#   debug5
					#   debug4
					#   debug3
					#   debug2
					#   debug1
					#   log
					#   notice
					#   warning
					#   error

#log_min_messages = warning		# values in order of decreasing detail:
					#   debug5
					#   debug4
					#   debug3
					#   debug2
					#   debug1
					#   info
					#   notice
					#   warning
					#   error
					#   log
					#   fatal
					#   panic

#log_error_verbosity = default		# terse, default, or verbose messages

#log_min_error_statement = error	# values in order of decreasing
detail:
				 	#   debug5
					#   debug4
					#   debug3
					#   debug2
					#   debug1
				 	#   info
					#   notice
					#   warning
					#   error
					#   log
					#   fatal
					#   panic (effectively off)

#log_min_duration_statement = -1	# -1 is disabled, 0 logs all
statements
					# and their durations, > 0 logs only
					# statements running at least this number
					# of milliseconds

#silent_mode = off			# DO NOT USE without syslog or
					# logging_collector
					# (change requires restart)

# - What to Log -

#debug_print_parse = off
#debug_print_rewritten = off
#debug_print_plan = off
#debug_pretty_print = on
#log_checkpoints = off
#log_connections = off
#log_disconnections = off
#log_duration = off
#log_hostname = off
#log_line_prefix = ''			# special values:
					#   %u = user name
					#   %d = database name
					#   %r = remote host and port
					#   %h = remote host
					#   %p = process ID
					#   %t = timestamp without milliseconds
					#   %m = timestamp with milliseconds
					#   %i = command tag
					#   %c = session ID
					#   %l = session line number
					#   %s = session start timestamp
					#   %v = virtual transaction ID
					#   %x = transaction ID (0 if none)
					#   %q = stop here in non-session
					#        processes
					#   %% = '%'
					# e.g. '<%u%%%d> '
#log_lock_waits = off			# log lock waits >= deadlock_timeout
#log_statement = 'none'			# none, ddl, mod, all
#log_temp_files = -1			# log temporary files equal or larger
					# than the specified size in kilobytes;
					# -1 disables, 0 logs all temp files
#log_timezone = unknown			# actually, defaults to TZ environment
					# setting


#------------------------------------------------------------------------------
# RUNTIME STATISTICS
#------------------------------------------------------------------------------

# - Query/Index Statistics Collector -

#track_activities = on
#track_counts = on
#track_functions = none			# none, pl, all
#track_activity_query_size = 1024
#update_process_title = on
#stats_temp_directory = 'pg_stat_tmp'


# - Statistics Monitoring -

#log_parser_stats = off
#log_planner_stats = off
#log_executor_stats = off
#log_statement_stats = off


#------------------------------------------------------------------------------
# AUTOVACUUM PARAMETERS
#------------------------------------------------------------------------------

autovacuum = off			# Enable autovacuum subprocess?  'on'
					# requires track_counts to also be on.
#log_autovacuum_min_duration = -1	# -1 disables, 0 logs all actions
and
					# their durations, > 0 logs only
					# actions running at least this number
					# of milliseconds.
#autovacuum_max_workers = 3		# max number of autovacuum subprocesses
#autovacuum_naptime = 1min		# time between autovacuum runs
#autovacuum_vacuum_threshold = 50	# min number of row updates before
					# vacuum
#autovacuum_analyze_threshold = 50	# min number of row updates before
					# analyze
#autovacuum_vacuum_scale_factor = 0.2	# fraction of table size before
vacuum
#autovacuum_analyze_scale_factor = 0.1	# fraction of table size before
analyze
#autovacuum_freeze_max_age = 200000000	# maximum XID age before forced
vacuum
					# (change requires restart)
#autovacuum_vacuum_cost_delay = 20ms	# default vacuum cost delay for
					# autovacuum, in milliseconds;
					# -1 means use vacuum_cost_delay
#autovacuum_vacuum_cost_limit = -1	# default vacuum cost limit for
					# autovacuum, -1 means use
					# vacuum_cost_limit


#------------------------------------------------------------------------------
# CLIENT CONNECTION DEFAULTS
#------------------------------------------------------------------------------

# - Statement Behavior -

#search_path = '"$user",public'		# schema names
#default_tablespace = ''		# a tablespace name, '' uses the default
#temp_tablespaces = ''			# a list of tablespace names, '' uses
					# only default tablespace
#check_function_bodies = on
#default_transaction_isolation = 'read committed'
#default_transaction_read_only = off
#session_replication_role = 'origin'
#statement_timeout = 0			# in milliseconds, 0 is disabled
#vacuum_freeze_min_age = 50000000
#vacuum_freeze_table_age = 150000000
#xmlbinary = 'base64'
#xmloption = 'content'

# - Locale and Formatting -

datestyle = 'iso, ymd'
#intervalstyle = 'postgres'
#timezone = unknown			# actually, defaults to TZ environment
					# setting
#timezone_abbreviations = 'Default'     # Select the set of available
time zone
					# abbreviations.  Currently, there are
					#   Default
					#   Australia
					#   India
					# You can create your own file in
					# share/timezonesets/.
#extra_float_digits = 0			# min -15, max 2
#client_encoding = sql_ascii		# actually, defaults to database
					# encoding

# These settings are initialized by initdb, but they can be changed.
lc_messages = 'Polish_Poland.1250'			# locale for system error message
					# strings
lc_monetary = 'Polish_Poland.1250'			# locale for monetary formatting
lc_numeric = 'Polish_Poland.1250'			# locale for number formatting
lc_time = 'Polish_Poland.1250'				# locale for time formatting

# default configuration for text search
default_text_search_config = 'pg_catalog.simple'

# - Other Defaults -

#dynamic_library_path = '$libdir'
#local_preload_libraries = ''


#------------------------------------------------------------------------------
# LOCK MANAGEMENT
#------------------------------------------------------------------------------

#deadlock_timeout = 1s
#max_locks_per_transaction = 64		# min 10
					# (change requires restart)
# Note:  Each lock table slot uses ~270 bytes of shared memory, and
there are
# max_locks_per_transaction * (max_connections +
max_prepared_transactions)
# lock table slots.


#------------------------------------------------------------------------------
# VERSION/PLATFORM COMPATIBILITY
#------------------------------------------------------------------------------

# - Previous PostgreSQL Versions -

#add_missing_from = off
#array_nulls = on
#backslash_quote = safe_encoding	# on, off, or safe_encoding
#default_with_oids = off
#escape_string_warning = on
#regex_flavor = advanced		# advanced, extended, or basic
#sql_inheritance = on
#standard_conforming_strings = off
#synchronize_seqscans = on

# - Other Platforms and Clients -

#transform_null_equals = off


#------------------------------------------------------------------------------
# CUSTOMIZED OPTIONS
#------------------------------------------------------------------------------

#custom_variable_classes = ''		# list of custom variable class names


pasman