Article View: comp.sys.ibm.pc.games
Article #674Re: Wing Commander II just hangs?? HELP!
From: lac... Lachlan Cranswick
Date: Wed, 20 May 1992 00:28
Date: Wed, 20 May 1992 00:28
30 lines
1806 bytes
1806 bytes
k...@solbourne.com (Ken Sullivan) writes: >Hi, >I am running WingCommander II from a Stacker drive. It runs just fine, >but when I select exit to DOS, it hangs, leaving the "exiting to DOS" >on the screen. The only way I can recover is to ctl-alt-del :-( >Does anybody have a clue as to why this is happening?? I have COMSPEC >defined. What am I leaving out?? This instructions leave a lot to be >desired about system configuration. BTW this is on a Gateway 2K 486/33 >w/ 16MB ram. >KJ Sullivan >k...@solbourne.com >insert std disclaimers here ................ Try running with the turbo button off. Also, did you load WCII with the files unpacked (15meg of space) or packed (~11 meg of space) because you may be unpacking files twice from a stacker drive and this is causing problems. Also, find what version of EMM386 you are using and the specification. WCII likes to see expanded memory. Occasionally, I have had a crash with a 486 with the turbo button off, but it was intermittent. -- Lachlan Cranswick - CSIRO _--_|\ lac...@dmp.CSIRO.AU Division of Mineral Products / \ +61 3 647 0367 PO Box 124, Port Melbourne 3207 \_.--._/ AUSTRALIA v DoD#0504
Technical Details
Message-ID:
<1992May20.002805.20080@dmp.csiro.au>Path:
mbox-mo1.pugleaf.net!sparky!uunet!munnari.oz.au!mel.dit.csiro.au!dmp.csiro.au!lachlanReferences:
<BoGqtE.2Go@solbourne.com>Show Full Headers
Complete Article Headers
Newsgroups: comp.sys.ibm.pc.games Path: mbox-mo1.pugleaf.net!sparky!uunet!munnari.oz.au!mel.dit.csiro.au!dmp.csiro.au!lachlan From: lac...@dmp.csiro.au (Lachlan Cranswick) Subject: Re: Wing Commander II just hangs?? HELP! Message-ID: <1992May20.002805.20080@dmp.csiro.au> Organization: CSIRO Division of Mineral Products, Melbourne, AUSTRALIA References: <BoGqtE.2Go@solbourne.com> Date: Wed, 20 May 1992 00:28:05 GMT Lines: 30 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit