🚀 go-pugleaf

ci...@d0tokensun.fnal.gov (Greg Cisko) writes:

>In article <1993Jun13.0...@sfu.ca>, wo...@fraser.sfu.ca (Edmund Wong) writes:
>|> 
>|>      I ftp'd zone66 from ftp.ulowell.edu, but for some reason, every time
>|> I run it(with all the necessary stuff done-i.e. clean Dos, no EMm..etc),
>|> Zone66 would run when I enter "zone66 /s", but after it says 
>|> "Renaissance Productions", it CHOKES on me..   Then it clears the
>|> screen and gives me a bunch wierd codes... ie.
>|> 
>|> 0D
>|> 000..

>I was able to run it just fine on my 386/16, DOS6 & DBLSPACE. There is one
>thing you did that I didn't. Try just ZONE66 not ZONE66 /S. I type ZONE66
>& it plays fine.  Make sure you bypass the startup files [f5]. No emm386,
>himem.sys, or setver or anything. Just dblspace in conventional memory &
>thats all. It should run fine.  After all I'm no expert & got it to work.
>Good luck!

Hmmm.  I got exactly the same problem, either ZONE66 /S or ZONE66 and it
will crashed on me with the hexadecimal dump.

When I play, I tell it explicity, to use the PC speaker, it works.
The SBPRO option seems to be bugged.  I have a true 100% dinkum SBPRO
and a 100% clean MSDOS 5 system, running on a 386.

The only thing out of the ordinary is I've configured my SBPRO on IRQ5,
not IRQ7 (it stuffs up on IRQ7 - conflict with parallel port, I guess).

--
Stephen Quan (qu...@sol.surv.utas.edu.au)      Tel : 002 202844 (local)
Research Fellow, Computer Scientist,          Fax : 002 240282 (local)
Centre for Spatial Information Systems,       Tel : 61 02 202844
University of Tasmania, Australia.            Fax : 61 02 240282