🚀 go-pugleaf

In article <33DB9F10...@ct1.nai.net>, jmsp...@ct1.nai.net says...
>
>Mark Owen Scott,
>
>  Here's my CONFIG.SYS, less the CD ROM driver that I use:
>
>DEVICE=C:\WINDOWS\HIMEM.SYS /V
>DEVICE=C:\WINDOWS\EMM386.EXE NOEMS D=64 X=C000-C7FF /V
>DOS=HIGH,UMB,AUTO
>FILESHIGH=50
>BUFFERSHIGH=22
>STACKSHIGH=9,256
>FCBSHIGH=1,0
>LASTDRIVEHIGH=Z
>SHELL=C:\COMMAND.COM C:\ /E:768 /P
>DEVICEHIGH=C:\WINDOWS\COMMAND\ANSI.SYS
>BREAK=ON
>
>  You need to load HIMEM.SYS & EMM386.EXE to setup your DOS memory.
>
>  Later.
>
>Mark Owen Scott wrote:
>
>> Milan wrote:
>> [snip]
>>
>>         Sorry I can't help you with your problem, but I have a similar
>>
>> situation.  My girlfriend's Cyrix 6x86 P-200 claims to have no upper
>> memory.  None, nada, zip.  This means that, while running in true DOS
>> mode, it can't run a vast majority of programs.  I suspect that Win95
>> has some legacy program that takes that space even when rebooting into
>>
>> MS-Dos mode.  I think I can get by with a boot disk, but those are a
>> royal pain in the [], and I'd rather find another way.
>>
>>         From what I've seen, no PC could run Win95 or any modern
>> program
>> without that upper memory, so I assume it does exist.  What gives?
>>
>> Email replies preferred.
>>
>> Pastor of Muppets
>>
>> Xenaphobia: fear of mythical heroines with large breasts.
>
>
>
>--
>  Good Luck.
>
>Joseph M. Spreng
>jmsp...@ct1.nai.net
>
>"If it looks like a duck, walks like a duck and quacks
>like a duck you've got a duck." -- Dan Rather
>
>
I get nearly the entire 640k with

A;\himem.sys
A:\emm386.exe ram
files=50
buffers=50
dos=high,umb
devicehigh=c:\windows\setver.exe
devicehigh=(Your cd driver)

This of course indicated that I like to use a boot disk. I copy himem.sys 
and emm386.exe to the disk. Hope this helps. Hope I am not intruding.

						Dutch