🚀 go-pugleaf

On 2009-11-21 14:15:14 +0100, "Marcin J. Kowalczyk" <kowalma@kowalma.kom> said:

> Slawek pisze:
>>> proxy1_address: "sip.itc.energis.pl"
>> 
>> Zrobiłem tak jak napisałeś. Wyedytowałem ten cały plik.Niestety ta 
>> konfigutacja się nie dododała do telefonu.Nie mam wszystkich opcji 
>> jakie są w pliku. Musiałem wszystko z klawiszy konfigurować. I telefon 
>> dalej nie działa.
> 
> a plik sie wogole zasysa?
> 
>> Dzięki za pomoc. Musisz miec chyba inne pliki u siebie. Nie wiem co 
>> zrobić aby to dzialało.Mam za mało informacji jak jest u Ciebie. Możesz 
>> zobaczyć jakie masz pliki w root na tftp? Może to coś nam wyjaśni?
> 
> mam SIPDefault.cnf w ktormy jest
> # Image Version
> image_version: "P0S3-08-2-00"
> 
> # Proxy Server
> # Note: I put the proxy server information in the individual conf files
> # for each machine, since each box has different configs.  You could, 
> of course,
> # put all of them here in the Default file...
> #proxy1_address: "192.168.117.4"
> #proxy2_address: "192.168.117.4"
> #proxy3_address: "192.168.117.4"
> #proxy4_address: "192.168.117.4"
> #proxy5_address: "192.168.117.4"
> #proxy6_address: "192.168.117.4"
> 
> # Proxy Server Port (default - 5061)
> #proxy1_port:"5060"
> #proxy2_port:"5060"
> #proxy3_port:"5060"
> #proxy4_port:"5060"
> #proxy5_port:"5060"
> #proxy6_port:"5060"
> 
> # Emergency Proxy info
> proxy_emergency: ""
> proxy_emergency_port: "5060"
> 
> # Backup Proxy info
> proxy_backup: ""
> proxy_backup_port: "5060"
> 
> # Outbound Proxy info
> outbound_proxy: ""
> outbound_proxy_port: ""
> 
> # NAT/Firewall Traversal
> nat_enable: "0"
> nat_address: ""
> voip_control_port: "5061"
> start_media_port: "16384"
> end_media_port:  "32766"
> nat_received_processing: "0"
> 
> # Proxy Registration (0-disable (default), 1-enable)
> proxy_register: "1"
> 
> # Phone Registration Expiration [1-3932100 sec] (Default - 3600)
> timer_register_expires: "60"
> 
> # Codec for media stream (g711ulaw (default), g711alaw, g729)
> preferred_codec: "g711alaw"
> 
> # TOS bits in media stream [0-5] (Default - 5)
> tos_media: "5"
> 
> # Enable VAD (0-disable (default), 1-enable)
> enable_vad: "1"
> 
> # Allow for the bridge on a 3way call to join remaining parties upon hangup
> cnf_join_enable: "1"     ; 0-Disabled, 1-Enabled (default)
> 
> # Allow Transfer to be completed while target phone is still ringing
> semi_attended_transfer: "1"   ; 0-Disabled, 1-Enabled (default)
> 
> # Telnet Level (enable or disable the ability to telnet into this phone
> telnet_level: "2"      ; 0-Disabled (default), 1-Enabled, 2-Privileged
> 
> # Inband DTMF Settings (0-disable, 1-enable (default))
> dtmf_inband: "1"
> 
> # Out of band DTMF Settings (none-disable, avt-avt enable (default), 
> avt_always - always avt )
> dtmf_outofband: "avt"
> 
> # DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default), 
> 4-3db up, 5-6dB up)
> dtmf_db_level: "3"
> 
> # SIP Timers
> timer_t1: "500"                   ; Default 500 msec
> timer_t2: "4000"                  ; Default 4 sec
> sip_retx: "10"                     ; Default 11
> sip_invite_retx: "6"               ; Default 7
> timer_invite_expires: "60"        ; Default 180 sec
> 
> # Setting for Message speeddial to UOne box
> messages_uri: "2500"
> 
> #*********  Release 2 new config parameters **********
> 
> # TFTP Phone Specific Configuration File Directory
> tftp_cfg_dir: "./"
> 
> # Time Server
> sntp_mode: "directedbroadcast"
> sntp_server: "date.inotel.pl"
> time_zone: "CET"
> dst_offset: "1"
> dst_start_month: "April"
> dst_start_day: ""
> dst_start_day_of_week: "Sun"
> dst_start_week_of_month: "1"
> dst_start_time: "02"
> dst_stop_month: "Oct"
> dst_stop_day: ""
> dst_stop_day_of_week: "Sunday"
> dst_stop_week_of_month: "8"
> dst_stop_time: "2"
> dst_auto_adjust: "1"
> date_format: "D/M/Y"
> 
> 
> # Do Not Disturb Control (0-off, 1-on, 2-off with no user control, 3-on 
> with no user control)
> dnd_control: "1"                  ; Default 0 (Do Not Disturb feature is off)
> 
> # Caller ID Blocking (0-disabled, 1-enabled, 2-disabled no user 
> control, 3-enabled no user control)
> callerid_blocking: "1"            ; Default 0 (Disable sending all 
> calls as anonymous)
> 
> # Anonymous Call Blocking (0-disbaled, 1-enabled, 2-disabled no user 
> control, 3-enabled no user control)
> anonymous_call_block: "0"         ; Default 0 (Disable blocking of 
> anonymous calls)
> 
> # Call Waiting (0-disabled, 1-enabled, 2-disabled with no user control, 
> 3-enabled with no user control)
> call_waiting: "1"                 ; Default 1 (Call Waiting enabled)
> 
> # DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127)
> dtmf_avt_payload: "101"           ; Default 100
> 
> # XML file that specifies the dialplan desired
> dial_template: "dialplan"
> 
> # Network Media Type (auto, full100, full10, half100, half10)
> network_media_type: "auto"
> 
> #Autocompletion During Dial (0-off, 1-on [default])
> autocomplete: "1"
> 
> #Time Format (0-12hr, 1-24hr [default])
> time_format_24hr: "1"
> 
> ####### New Parameters added in Release 4.0 #######
> 
> # XML URLs
> #services_url: "http://192.168.1.145/menu.pl" ; URL for external Phone Services
> #services_url: "http://192.168.1.254/cgi-bin/cisco7960/menu.xml"  ; test url
> #directory_url: 
> "http://192.168.7.101/voip_xml_utils/index.cfm?fuseaction=dspEmployeeMenu"
# 
> 
> URL for external Directory location
> logo_url: "http://10.0.1.3/asterisk-tux.bmp"                    ; URL 
> for branding logo to be used on phone display
> 
> # put your own logo in the logo_url location; I include the 10-20.com 
> one for reference in building your own
> 
> # HTTP Proxy Support
> http_proxy_addr: ""             ; Address of HTTP Proxy server
> http_proxy_port: 80             ; Port of HTTP Proxy Server (80-default)
> 
> # Dynamic DNS/TFTP Support
> dyn_dns_addr_1: ""              ; restricted to dotted IP
> dyn_dns_addr_2: ""              ; restricted to dotted IP
> dyn_tftp_addr: "192.168.1.145"   ; restricted to dotted IP
> 
> # The dynamic tftp server should be set to whatever your TFTP server 
> is.   This way, it
> # keeps the tftp server setting even though you might be using DHCP 
> (default behavior
> # is to use the DHCP server as a tftp server, which is rarely correct.)
> 
> # Remote Party ID
> remote_party_id: 1              ; 0-Disabled (default), 1-Enabled
> 
> 
> pozniej SIPMAC.cfg o ktorym pisalem wczesniej - zobacz 	jakie pliki 
> telefon probuje pobrac. Powienes miec w logu serwera tftp
> 
>   > A
>> może wyślę Ci telefon i odpłatnie skonfigurujesz?
> 
> przesylka moze cie zabic finansowo ;>
> 
>   > Jeśli masz jakiś pomysł to napisz.
> 
> sprawdz jakie pliki telefon probuje zassac, jakie masz firmware (Wersje)
> 
>  > Jeśli nie, to wywalam telefon do kubła i po problemie.
> 
> Moj kolega 1.5tyg walczyl z 7965 i dal rade na tych konfigach co tutaj podalem

Ja mam starszą wersję. 307. Twwoje są 3.08. Przydałoby się więc 
wszystkie pliki zainstalować w wersji 3.08. Ale ich nie mam.
Sławek