🚀 go-pugleaf

Jak by ktoś jeszcze miał problem z tym telefonem, to mi udało się skonfigurować tak, aby działał z polskim dostawcą SIP. Udostępniłem swoje konfiguracje i opisałem kilka rzeczy na stronie: http://marmez.net/2016/cisco-7940-7960-dzialajaca-konfiguracja-sip-z-halonet-pl/ 

Poniżej zamiaszczam też tę konfigurację z kilkoma komentarzami: 

Pliki konfiguracyjne
SIPDefault.cnf

# Image Version
image_version: "P0S3-08-6-00" #"P0S3-04-4-00"

# Proxy Server
# Note: I put the proxy server information in the individual conf files
# for each machine, since each box has different configs.  You could, of course,
# put all of them here in the Default file...
#proxy1_address: "sip.halonet.pl"  
#proxy2_address: "sip.halonet.pl"
#proxy3_address: "sip.halonet.pl"
#proxy4_address: "sip.halonet.pl"
#proxy5_address: "sip.halonet.pl"
#proxy6_address: "sip.halonet.pl"
 
# Proxy Server Port (default - 5061)
proxy1_port:"5061"
proxy2_port:"5061"
proxy3_port:"5061"
proxy4_port:"5061"
proxy5_port:"5061"
proxy6_port:"5061"

# Emergency Proxy info
proxy_emergency: ""
proxy_emergency_port: "5061"

# Backup Proxy info
proxy_backup: ""
proxy_backup_port: "5061"
 
# Outbound Proxy info
outbound_proxy: ""
outbound_proxy_port: ""
 
# NAT/Firewall Traversal
nat_enable: "1"
nat_address: "xxx.AAA.YYY.ZZZ" # Moje publiczne ip (zewnetrzne) np.: nat_address: "47.56.111.114", nie wiem czy trzeba to na sztywno wpisywac, mozna sprobowac zostawic puste...
voip_control_port: "5061"
start_media_port: "16384"
end_media_port:  "32766"
nat_received_processing: "1"

# Proxy Registration (0-disable (default), 1-enable)
proxy_register: "1"
 
# Phone Registration Expiration [1-3932100 sec] (Default - 3600)
timer_register_expires: "3600"
 
# Codec for media stream (g711ulaw (default), g711alaw, g729)
preferred_codec: "none"
 
# TOS bits in media stream [0-5] (Default - 5)
tos_media: "5"

# Enable VAD (0-disable (default), 1-enable)
enable_vad: "0"
 
# Allow for the bridge on a 3way call to join remaining parties upon hangup
cnf_join_enable: "1"     ; 0-Disabled, 1-Enabled (default)
 
# Allow Transfer to be completed while target phone is still ringing
semi_attended_transfer: "0"   ; 0-Disabled, 1-Enabled (default)
 
# Telnet Level (enable or disable the ability to telnet into this phone
telnet_level: "1"      ; 0-Disabled (default), 1-Enabled, 2-Privileged

# Inband DTMF Settings (0-disable, 1-enable (default))
dtmf_inband: "1"
 
# Out of band DTMF Settings (none-disable, avt-avt enable (default), avt_always - always avt )
dtmf_outofband: "avt"
 
# DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default), 4-3db up, 5-6dB up)
dtmf_db_level: "3"
 
# SIP Timers
timer_t1: "500"                   ; Default 500 msec
timer_t2: "4000"                  ; Default 4 sec
sip_retx: "10"                     ; Default 11
sip_invite_retx: "6"               ; Default 7
timer_invite_expires: "180"        ; Default 180 sec
 
# Setting for Message speeddial to UOne box
messages_uri: "2500" #pod ten nr telefon będzie dzwonił po naciśnięciu przyciska z kopertą

#*********  Release 2 new config parameters **********
 
# TFTP Phone Specific Configuration File Directory
tftp_cfg_dir: "./"
 
# Time Server
sntp_mode: "directedbroadcast"
sntp_server: "17.254.0.49"
time_zone: "CET"
dst_offset: "1"
dst_start_month: "April"
dst_start_day: ""
dst_start_day_of_week: "Mon"
dst_start_week_of_month: "1"
dst_start_time: "02"
dst_stop_month: "Oct"
dst_stop_day: ""
dst_stop_day_of_week: "Sunday"
dst_stop_week_of_month: "8"
dst_stop_time: "2"
dst_auto_adjust: "1"
 
# Do Not Disturb Control (0-off, 1-on, 2-off with no user control, 3-on with no user control)
dnd_control: "0"                  ; Default 0 (Do Not Disturb feature is off)
 
# Caller ID Blocking (0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control)
callerid_blocking: "0"            ; Default 0 (Disable sending all calls as anonymous)
 
# Anonymous Call Blocking (0-disbaled, 1-enabled, 2-disabled no user control, 3-enabled no user control)
anonymous_call_block: "0"         ; Default 0 (Disable blocking of anonymous calls)
 
# Call Waiting (0-disabled, 1-enabled, 2-disabled with no user control, 3-enabled with no user control)
call_waiting: "1"                 ; Default 1 (Call Waiting enabled)

# DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127)
dtmf_avt_payload: "101"           ; Default 100
 
# XML file that specifies the dialplan desired
dial_template: "dialplan"

# Network Media Type (auto, full100, full10, half100, half10)
network_media_type: "auto"

#Autocompletion During Dial (0-off, 1-on [default])
autocomplete: "1"

#Time Format (0-12hr, 1-24hr [default])
time_format_24hr: "1"

####### New Parameters added in Release 4.0 #######

# XML URLs
#services_url: "http://192.168.1.145/menu.pl" ; URL for external Phone Services
#services_url: "http://192.168.1.254/cgi-bin/cisco7960/menu.xml"  ; test url
#directory_url: "http://192.168.7.101/voip_xml_utils/index.cfm?fuseaction=dspEmployeeMenu"               
# URL for external Directory location
logo_url: "http://example.com/folder/tux-compas-3.bmp"     ; URL obrazka, jaki widac na wyswietlaczu telefonu - za kazdym wlaczeniem telefonu jest pobierany na nowo, telefon go nie zapamietuje.

# put your own logo in the logo_url location; I include the 10-20.com one for reference in building your own

# HTTP Proxy Support
http_proxy_addr: ""             ; Address of HTTP Proxy server
http_proxy_port: 80             ; Port of HTTP Proxy Server (80-default)

# Dynamic DNS/TFTP Support
dyn_dns_addr_1: ""              ; restricted to dotted IP
dyn_dns_addr_2: ""              ; restricted to dotted IP
dyn_tftp_addr: "192.168.1.116"   ; restricted to dotted IP

# The dynamic tftp server should be set to whatever your TFTP server is.  This way, it
# keeps the tftp server setting even though you might be using DHCP (default behavior
# is to use the DHCP server as a tftp server, which is rarely correct.)

# Remote Party ID
remote_party_id: 1              ; 0-Disabled (default), 1-Enabled
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
	
# Image Version
image_version: "P0S3-08-6-00" #"P0S3-04-4-00"
 
# Proxy Server
# Note: I put the proxy server information in the individual conf files
# for each machine, since each box has different configs.  You could, of course,
# put all of them here in the Default file...
#proxy1_address: "sip.halonet.pl"  
#proxy2_address: "sip.halonet.pl"
#proxy3_address: "sip.halonet.pl"
#proxy4_address: "sip.halonet.pl"
#proxy5_address: "sip.halonet.pl"
#proxy6_address: "sip.halonet.pl"
 
# Proxy Server Port (default - 5061)
proxy1_port:"5061"
proxy2_port:"5061"
proxy3_port:"5061"
proxy4_port:"5061"
proxy5_port:"5061"
proxy6_port:"5061"
 
# Emergency Proxy info
proxy_emergency: ""
proxy_emergency_port: "5061"
 
# Backup Proxy info
proxy_backup: ""
proxy_backup_port: "5061"
 
# Outbound Proxy info
outbound_proxy: ""
outbound_proxy_port: ""
 
# NAT/Firewall Traversal
nat_enable: "1"
nat_address: "xxx.AAA.YYY.ZZZ" # Moje publiczne ip (zewnetrzne) np.: nat_address: "47.56.111.114", nie wiem czy trzeba to na sztywno wpisywac, mozna sprobowac zostawic puste...
voip_control_port: "5061"
start_media_port: "16384"
end_media_port:  "32766"
nat_received_processing: "1"
 
# Proxy Registration (0-disable (default), 1-enable)
proxy_register: "1"
 
# Phone Registration Expiration [1-3932100 sec] (Default - 3600)
timer_register_expires: "3600"
 
# Codec for media stream (g711ulaw (default), g711alaw, g729)
preferred_codec: "none"
 
# TOS bits in media stream [0-5] (Default - 5)
tos_media: "5"
 
# Enable VAD (0-disable (default), 1-enable)
enable_vad: "0"
 
# Allow for the bridge on a 3way call to join remaining parties upon hangup
cnf_join_enable: "1"     ; 0-Disabled, 1-Enabled (default)
 
# Allow Transfer to be completed while target phone is still ringing
semi_attended_transfer: "0"   ; 0-Disabled, 1-Enabled (default)
 
# Telnet Level (enable or disable the ability to telnet into this phone
telnet_level: "1"      ; 0-Disabled (default), 1-Enabled, 2-Privileged
 
# Inband DTMF Settings (0-disable, 1-enable (default))
dtmf_inband: "1"
 
# Out of band DTMF Settings (none-disable, avt-avt enable (default), avt_always - always avt )
dtmf_outofband: "avt"
 
# DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default), 4-3db up, 5-6dB up)
dtmf_db_level: "3"
 
# SIP Timers
timer_t1: "500"                   ; Default 500 msec
timer_t2: "4000"                  ; Default 4 sec
sip_retx: "10"                     ; Default 11
sip_invite_retx: "6"               ; Default 7
timer_invite_expires: "180"        ; Default 180 sec
 
# Setting for Message speeddial to UOne box
messages_uri: "2500" #pod ten nr telefon będzie dzwonił po naciśnięciu przyciska z kopertą
 
#*********  Release 2 new config parameters **********
 
# TFTP Phone Specific Configuration File Directory
tftp_cfg_dir: "./"
 
# Time Server
sntp_mode: "directedbroadcast"
sntp_server: "17.254.0.49"
time_zone: "CET"
dst_offset: "1"
dst_start_month: "April"
dst_start_day: ""
dst_start_day_of_week: "Mon"
dst_start_week_of_month: "1"
dst_start_time: "02"
dst_stop_month: "Oct"
dst_stop_day: ""
dst_stop_day_of_week: "Sunday"
dst_stop_week_of_month: "8"
dst_stop_time: "2"
dst_auto_adjust: "1"
 
# Do Not Disturb Control (0-off, 1-on, 2-off with no user control, 3-on with no user control)
dnd_control: "0"                  ; Default 0 (Do Not Disturb feature is off)
 
# Caller ID Blocking (0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control)
callerid_blocking: "0"            ; Default 0 (Disable sending all calls as anonymous)
 
# Anonymous Call Blocking (0-disbaled, 1-enabled, 2-disabled no user control, 3-enabled no user control)
anonymous_call_block: "0"         ; Default 0 (Disable blocking of anonymous calls)
 
# Call Waiting (0-disabled, 1-enabled, 2-disabled with no user control, 3-enabled with no user control)
call_waiting: "1"                 ; Default 1 (Call Waiting enabled)
 
# DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127)
dtmf_avt_payload: "101"           ; Default 100
 
# XML file that specifies the dialplan desired
dial_template: "dialplan"
 
# Network Media Type (auto, full100, full10, half100, half10)
network_media_type: "auto"
 
#Autocompletion During Dial (0-off, 1-on [default])
autocomplete: "1"
 
#Time Format (0-12hr, 1-24hr [default])
time_format_24hr: "1"
 
####### New Parameters added in Release 4.0 #######
 
# XML URLs
#services_url: "http://192.168.1.145/menu.pl" ; URL for external Phone Services
#services_url: "http://192.168.1.254/cgi-bin/cisco7960/menu.xml"  ; test url
#directory_url: "http://192.168.7.101/voip_xml_utils/index.cfm?fuseaction=dspEmployeeMenu"               
# URL for external Directory location
logo_url: "http://example.com/folder/tux-compas-3.bmp"     ; URL obrazka, jaki widac na wyswietlaczu telefonu - za kazdym wlaczeniem telefonu jest pobierany na nowo, telefon go nie zapamietuje.
 
# put your own logo in the logo_url location; I include the 10-20.com one for reference in building your own
 
# HTTP Proxy Support
http_proxy_addr: ""             ; Address of HTTP Proxy server
http_proxy_port: 80             ; Port of HTTP Proxy Server (80-default)
 
# Dynamic DNS/TFTP Support
dyn_dns_addr_1: ""              ; restricted to dotted IP
dyn_dns_addr_2: ""              ; restricted to dotted IP
dyn_tftp_addr: "192.168.1.116"   ; restricted to dotted IP
 
# The dynamic tftp server should be set to whatever your TFTP server is.  This way, it
# keeps the tftp server setting even though you might be using DHCP (default behavior
# is to use the DHCP server as a tftp server, which is rarely correct.)
 
# Remote Party ID
remote_party_id: 1              ; 0-Disabled (default), 1-Enabled

SIP[MAC].cnf

# SIP Configuration Generic File (start)


# Proxy Server
proxy1_address: "sip.halonet.pl"
proxy2_address: "sip.halonet.pl"
proxy3_address: "193.43.148.37"
proxy4_address: "193.43.148.37"
proxy5_address: "193.43.148.37"
proxy6_address: "193.43.148.37"

# Line 1 Settings
line1_name: "nazwa_konta_u_operatora"                     ; Line 1 Extension\User ID
line1_displayname: "nazwa-jaka-telefon-wyswietla"           ; Line 1 Display Name
line1_authname: "nazwa_konta_u_operator"         ; Line 1 Registration Authentication
line1_password: "haslo_u_operatora_do_tego_konta"         ; Line 1 Registration Password

# Line 2 Settings
line2_name: "nazwa_konta_u_operator"                          ; Line 2 Extension\User ID
line2_displayname: "nazwa-jaka-telefon-wyswietla"                   ; Line 2 Display Name
line2_authname: "nazwa_konta_u_operator"         ; Line 2 Registration Authentication
line2_password: "haslo_u_operatora_do_tego_konta"         ; Line 2 Registration Password

# Line 3 Settings
line3_name: ""                          ; Line 3 Extension\User ID
line3_displayname: ""                   ; Line 3 Display Name
line3_authname: "UNPROVISIONED"         ; Line 3 Registration Authentication
line3_password: "UNPROVISIONED"         ; Line 3 Registration Password

# Line 4 Settings
line4_name: ""                          ; Line 4 Extension\User ID
line4_displayname: ""                   ; Line 4 Display Name
line4_authname: "UNPROVISIONED"         ; Line 4 Registration Authentication
line4_password: "UNPROVISIONED"         ; Line 4 Registration Password

# Line 5 Settings
line5_name: ""                          ; Line 5 Extension\User ID
line5_displayname: ""                   ; Line 5 Display Name
line5_authname: "UNPROVISIONED"         ; Line 5 Registration Authentication
line5_password: "UNPROVISIONED"         ; Line 5 Registration Password

# Line 6 Settings
line6_name: ""                          ; Line 6 Extension\User ID
line6_displayname: ""                   ; Line 6 Display Name
line6_authname: "UNPROVISIONE"         ; Line 6 Registration Authentication
line6_password: "UNPROVISIONE"         ; Line 6 Registration Password

# Emergency Proxy info
proxy_emergency: ""
proxy_emergency_port: "5061"

# Backup Proxy info
proxy_backup: ""
proxy_backup_port: "5061"

# Outbound Proxy info
outbound_proxy: ""
outbound_proxy_port: "5061"

# NAT/Firewall Traversal
nat_enable: "1"
nat_address: "xxx.AAA.YYY.ZZZ" # Moje publiczne ip (zewnetrzne) np.: nat_address: "47.56.111.114", nie wiem czy trzeba to na sztywno wpisywac, mozna sprobowac zostawic puste... 
voip_control_port: "5061"
start_media_port: "16384"
end_media_port:  "32766"
nat_received_processing: "1"

# Phone Label (Text desired to be displayed in upper right corner)
phone_label: " .oO00Oo. .oO00Oo.  "            ; Napis wyswietlany u gory ekranu - bez znaczenia dla rozmow ; Has no effect on SIP messaging

# Time Zone phone will reside in
time_zone: CET 

# Telnet Level (enable or disable the ability to telnet into this phone
telnet_level: "2"      ; 0-Disabled (default), 1-Enabled, 2-Privileged

# Phone prompt/password for telnet/console session
phone_prompt: "Go Away"                              ; Telnet/Console Prompt
phone_password: "haslo_telefonu"           ; Telnet/Console Password, np. do odblokowywania ustawiez i ich edycji z poziomu telefonu

# Enable_VAD (1-enabled, 0-disabled)
enable_vad: "0"

# Network Media Type (auto, full100, full10, half100, half10)
network_media_type: "auto"
user_info: phone

# URL for external Directory location
logo_url: "http://example.com/folder/tux-compas-3.bmp"     ; URL obrazka, jaki widac na wyswietlaczu telefonu - za kazdym wlaczeniem telefonu jest pobierany na nowo, telefon go nie zapamietuje. Bez tego telefon tez dziala.

# SIP Configuration Generic File (stop)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
	
# SIP Configuration Generic File (start)
 
 
# Proxy Server
proxy1_address: "sip.halonet.pl"
proxy2_address: "sip.halonet.pl"
proxy3_address: "193.43.148.37"
proxy4_address: "193.43.148.37"
proxy5_address: "193.43.148.37"
proxy6_address: "193.43.148.37"
 
# Line 1 Settings
line1_name: "nazwa_konta_u_operatora"                     ; Line 1 Extension\User ID
line1_displayname: "nazwa-jaka-telefon-wyswietla"           ; Line 1 Display Name
line1_authname: "nazwa_konta_u_operator"         ; Line 1 Registration Authentication
line1_password: "haslo_u_operatora_do_tego_konta"         ; Line 1 Registration Password
 
# Line 2 Settings
line2_name: "nazwa_konta_u_operator"                          ; Line 2 Extension\User ID
line2_displayname: "nazwa-jaka-telefon-wyswietla"                   ; Line 2 Display Name
line2_authname: "nazwa_konta_u_operator"         ; Line 2 Registration Authentication
line2_password: "haslo_u_operatora_do_tego_konta"         ; Line 2 Registration Password
 
# Line 3 Settings
line3_name: ""                          ; Line 3 Extension\User ID
line3_displayname: ""                   ; Line 3 Display Name
line3_authname: "UNPROVISIONED"         ; Line 3 Registration Authentication
line3_password: "UNPROVISIONED"         ; Line 3 Registration Password
 
# Line 4 Settings
line4_name: ""                          ; Line 4 Extension\User ID
line4_displayname: ""                   ; Line 4 Display Name
line4_authname: "UNPROVISIONED"         ; Line 4 Registration Authentication
line4_password: "UNPROVISIONED"         ; Line 4 Registration Password
 
# Line 5 Settings
line5_name: ""                          ; Line 5 Extension\User ID
line5_displayname: ""                   ; Line 5 Display Name
line5_authname: "UNPROVISIONED"         ; Line 5 Registration Authentication
line5_password: "UNPROVISIONED"         ; Line 5 Registration Password
 
# Line 6 Settings
line6_name: ""                          ; Line 6 Extension\User ID
line6_displayname: ""                   ; Line 6 Display Name
line6_authname: "UNPROVISIONE"         ; Line 6 Registration Authentication
line6_password: "UNPROVISIONE"         ; Line 6 Registration Password
 
# Emergency Proxy info
proxy_emergency: ""
proxy_emergency_port: "5061"
 
# Backup Proxy info
proxy_backup: ""
proxy_backup_port: "5061"
 
# Outbound Proxy info
outbound_proxy: ""
outbound_proxy_port: "5061"
 
# NAT/Firewall Traversal
nat_enable: "1"
nat_address: "xxx.AAA.YYY.ZZZ" # Moje publiczne ip (zewnetrzne) np.: nat_address: "47.56.111.114", nie wiem czy trzeba to na sztywno wpisywac, mozna sprobowac zostawic puste... 
voip_control_port: "5061"
start_media_port: "16384"
end_media_port:  "32766"
nat_received_processing: "1"
 
# Phone Label (Text desired to be displayed in upper right corner)
phone_label: " .oO00Oo. .oO00Oo.  "            ; Napis wyswietlany u gory ekranu - bez znaczenia dla rozmow ; Has no effect on SIP messaging
 
# Time Zone phone will reside in
time_zone: CET 
 
# Telnet Level (enable or disable the ability to telnet into this phone
telnet_level: "2"      ; 0-Disabled (default), 1-Enabled, 2-Privileged
 
# Phone prompt/password for telnet/console session
phone_prompt: "Go Away"                              ; Telnet/Console Prompt
phone_password: "haslo_telefonu"           ; Telnet/Console Password, np. do odblokowywania ustawiez i ich edycji z poziomu telefonu
 
# Enable_VAD (1-enabled, 0-disabled)
enable_vad: "0"
 
# Network Media Type (auto, full100, full10, half100, half10)
network_media_type: "auto"
user_info: phone
 
# URL for external Directory location
logo_url: "http://example.com/folder/tux-compas-3.bmp"     ; URL obrazka, jaki widac na wyswietlaczu telefonu - za kazdym wlaczeniem telefonu jest pobierany na nowo, telefon go nie zapamietuje. Bez tego telefon tez dziala.
 
# SIP Configuration Generic File (stop)

Na co zwrócić uwagę - wskazówki

Gdy już będziemy mieli wgrane oprogramowanie SIP to będziemy mieli możliwość czytania informacji/statusu w telefonie, są tam informacje o błędach/ostrzeżeniach. Są bardzo pomocne. Np. błąd AUTH autoryzacji, czyli tel. dobił się do serwera SIP (u operatora), ale nie zalogował się. Np. ja źle zmieniłem hasło, czyli miałem złe hasło, bo w halonet.pl przy zmianie hasła do konta, trzeba potwierdzić dwa razy, aż przeczytamy komunikat, że hasło zostało poprawnie zmienione. Jeżeli telefon w ogóle nie trafia komunikacyjnie na serwer SIP to jest inny błąd. Można to testować wpisując celowo złe dane w plikach konfiguracyjnych i patrzeć, czy w telefonie widzimy te ustawienia tak, jak my je wpisujemy.

Pozdrawiam i powodzenia życzę! :)