🚀 go-pugleaf

Posiedziałem jeszcze dzisiaj ale nic nie wskórałem. W logach wychodzi coś 
takiego.
Sat, 2000-01-01 01:02:39 - tdb_store: calling tdb_update.

Sat, 2000-01-01 01:02:39 - Enter: tdb_update.
Sat, 2000-01-01 01:02:39 - DEBUG : setting line discipline hook
Sat, 2000-01-01 01:02:39 - Sending PADI
Sat, 2000-01-01 01:02:39 - HOST_UNIQ successful match
Sat, 2000-01-01 01:02:39 - Unexpected packet: Ether addr: 00:30:88:01:a9:9b 
(PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 
length=0x0024 (PADO) PPPoE tag: type=0103 length=0008 (Host Uniq) data 
(bin): 10 00 d6 88 03 97 45 1f PPPoE tag: type=0102 length=0006
Sat, 2000-01-01 01:02:39 - Send PADT for unexpected 
PADO,ses->remote.sll_addr=00:30:88:01:f3:b4
Sat, 2000-01-01 01:02:39 - HOST_UNIQ successful match
Sat, 2000-01-01 01:02:39 - Unexpected packet: Ether addr: 00:30:88:01:a9:9d 
(PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 
length=0x0024 (PADO) PPPoE tag: type=0103 length=0008 (Host Uniq) data 
(bin): 10 00 d6 88 03 97 45 1f PPPoE tag: type=0102 length=0006
Sat, 2000-01-01 01:02:39 - Send PADT for unexpected 
PADO,ses->remote.sll_addr=00:30:88:01:f3:b4
Sat, 2000-01-01 01:02:39 - HOST_UNIQ successful match
Sat, 2000-01-01 01:02:39 - Got connection: 1d9c
Sat, 2000-01-01 01:02:39 - Connecting PPPoE socket: 00:30:88:01:f3:b4 1d9c 
nas0 0x1000d688
Sat, 2000-01-01 01:02:39 - using channel 1
Sat, 2000-01-01 01:02:39 - Using interface ppp0
Sat, 2000-01-01 01:02:39 - Enter: tdb_store.
Sat, 2000-01-01 01:02:39 - tdb_store: calling tdb_update.

Parametry linii mam takie:

--- System Information ---
Vendor: Linksys
ModelName: WAG120N
Firmware Version: B1.00.16 , 2010-08-06T16:10:41
GUI Version: B1.00.16_007
Boot Version: 1.0.37-5.4
Hardware Version: 0.01

--- DSL Information ---
DSL Driver Version:  3.4.6.3.0.2

DSL VPI/VCI:         1/32
DSL Status:          Up
DSL Mode:            ADSL2+
DSL Channel:         0
DSL Upstream Rate:   637 kbps
DSL Downstream Rate: 7520 kbps

                      Down         up
DSL Noise Margin:     255 dB       262 dB
DSL Attenuation:       47 dB       171 dB
DSL Transmit Power:  -480 dBm     -425 dBm

--- Wireless Information ---
Wireless Driver Version: "2.2.0.5"
Wireless Tools Version:
Wireless Status: Enabled
Wireless Wide Channel: 9
Wireless Standard Channel: 11- 2.462GHZ
Wireless SSID: linksys

--- Dynamic Information ---
LAN Mac Address: 98:FC:11:A3:A3:C0
WAN Mac Address: 00:30:88:01:a9:9b
Wireless Mac Address: 98:FC:11:A3:A3:C1

Mac wan zmienialem na taki z logu i tan z calisto i dalej to samo

Nieraz inaczej zaskoczy i takie coś wyskakuje w logu i ciągle jak napisane 
że się rozłacza się i podłacza dsl co widać na ikonie na modemie.

Sat, 2000-01-01 01:01:34 - Doing disconnect
Sat, 2000-01-01 01:01:34 - Exit.
Sat, 2000-01-01 01:01:51 - Adsl is disconnected
Sat, 2000-01-01 01:02:22 - Adsl is connected
Sat, 2000-01-01 01:02:27 - Initialize LCP.
Sat, 2000-01-01 01:02:27 - Plugin pppoe loaded.
Sat, 2000-01-01 01:02:27 - PPPoE Plugin Initialized
Sat, 2000-01-01 01:02:27 - Plugin pppoe called.
Sat, 2000-01-01 01:02:28 - Enter: tdb_store.
Sat, 2000-01-01 01:02:28 - tdb_store: calling tdb_update.
Sat, 2000-01-01 01:02:28 - Enter: tdb_update.
Sat, 2000-01-01 01:02:28 - pppd 2.4.1 started by root, uid 0
Sat, 2000-01-01 01:02:28 - Enter: tdb_store.
Sat, 2000-01-01 01:02:28 - tdb_store: calling tdb_update.
Sat, 2000-01-01 01:02:28 - Enter: tdb_update.
Sat, 2000-01-01 01:02:28 - Enter: tdb_store.
Sat, 2000-01-01 01:02:28 - tdb_store: calling tdb_update.
Sat, 2000-01-01 01:02:28 - Enter: tdb_update.
Sat, 2000-01-01 01:02:28 - Enter: tdb_store.
Sat, 2000-01-01 01:02:28 - tdb_store: calling tdb_update.
Sat, 2000-01-01 01:02:28 - Enter: tdb_update.
Sat, 2000-01-01 01:02:28 - Enter: tdb_store.
Sat, 2000-01-01 01:02:28 - tdb_store: calling tdb_update.
Sat, 2000-01-01 01:02:28 - Enter: tdb_update.
Sat, 2000-01-01 01:02:28 - Enter: tdb_store.
Sat, 2000-01-01 01:02:28 - tdb_store: calling tdb_update.
Sat, 2000-01-01 01:02:28 - Enter: tdb_update.
Sat, 2000-01-01 01:02:28 - DEBUG : setting line discipline hook
Sat, 2000-01-01 01:02:28 - Sending PADI
Sat, 2000-01-01 01:02:29 - Sending PADI 1...
Sat, 2000-01-01 01:02:31 - Sending PADI 2...
Sat, 2000-01-01 01:02:35 - Sending PADI 3...
Sat, 2000-01-01 01:02:43 - Sending PADI 4...
Sat, 2000-01-01 01:02:59 - Restart adsl...
Sat, 2000-01-01 01:02:59 - Connecting PPPoE socket: 00:00:00:00:00:00 0000 
0x1000d688
Sat, 2000-01-01 01:02:59 - Couldn't get channel number: Transport endpoint 
is not connected
Sat, 2000-01-01 01:02:59 - Doing disconnect
Sat, 2000-01-01 01:02:59 - Exit.
Sat, 2000-01-01 01:03:22 - Adsl is disconnected
Sat, 2000-01-01 01:03:52 - Adsl is connected
Sat, 2000-01-01 01:03:58 - Initialize LCP.
Sat, 2000-01-01 01:03:58 - Plugin pppoe loaded.
Sat, 2000-01-01 01:03:58 - PPPoE Plugin Initialized
Sat, 2000-01-01 01:03:58 - Plugin pppoe called.
Sat, 2000-01-01 01:03:58 - Enter: tdb_store.
Sat, 2000-01-01 01:03:58 - tdb_store: calling tdb_update.
Sat, 2000-01-01 01:03:58 - Enter: tdb_update.
Sat, 2000-01-01 01:03:58 - pppd 2.4.1 started by root, uid 0

Czy da się to cholerstwo jakoś uruchomić? A może on jest jakiś walnięty bo 
te parametry linii gdy porównywałem to jakiś kosmos:) Modem ma wtyczkę RJ45 
ja wkładam rj11 ale skoro się synchronizuje to chyba nie to jest powodem.