🚀 go-pugleaf

Jak zmienc MTU pod windows XP

To Modify The MTU Size
To modify the PPPoE MTU size, locate the following registry key:

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Ndiswan\Parameters\Prot
ocols\0
and add the following registry values:
  Value name: ProtocolType
  Data Type: REG_DWORD
  Value Data: 0x00000800

  Value name: PPPProtocolType
  Data Type: REG_DWORD
  Value Data: 0x00000021

  Value name: ProtocolMTU
  Data Type: REG_DWORD
  Value Data: the appropriate MTU size (in decimal)
To do so:
  1.. Click Start, click Run, type regedit, and then click OK.
  2.. Locate and then click the following key in the registry:
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Ndiswan\Parameters
  3.. On the Edit menu, point to New, and then click Key.
  4.. Type Protocols, and then press ENTER.
  5.. On the Edit menu, point to New, and then click Key.
  6.. Type 0, and then press ENTER.
  7.. On the Edit menu, point to New, and then click DWORD Value.
  8.. Type ProtocolType, and then press ENTER.
  9.. On the Edit menu, click Modify.
  10.. Type 800, and then click OK.
  11.. On the Edit menu, point to New, and then click DWORD Value.
  12.. Type PPPProtocolType, and then press ENTER.
  13.. On the Edit menu, click Modify.
  14.. Type 21, and then click OK.
  15.. On the Edit menu, point to New, and then click DWORD Value.
  16.. Type ProtocolMTU, and then press ENTER.
  17.. On the Edit menu, click Modify.
  18.. Type the appropriate MTU size (decimal value), and then click OK.
  19.. Quit Registry Editor.