Re: Problem z konfiguracją routera, proszę o pomoc.

Article View: alt.pl.freesco

Article #11089

#11089

From: caldemeyn
Date: Mon, 03 Oct 2005 14:41

211 lines
7800 bytes

Olek wrote:

> Proponuję wklej tutaj wyniki tych poleceń.




hej, wklejam szczegóły mojej konfiguracji:


-------------ifconfig:-------------------
lo        Link encap:Local Loopback
           inet addr:127.0.0.1  Bcast:127.255.255.255  Mask:255.0.0.0
           UP BROADCAST LOOPBACK RUNNING  MTU:3584  Metric:1
           RX packets:0 errors:0 dropped:0 overruns:0
           TX packets:0 errors:0 dropped:0 overruns:0

eth0      Link encap:10Mbps Ethernet  HWaddr 00:E0:7D:86:AA:7A
           inet addr:87.207.143.212  Bcast:255.255.255.255 
Mask:255.255.254.0
           UP BROADCAST NOTRAILERS RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:395 errors:0 dropped:0 overruns:0
           TX packets:3 errors:0 dropped:0 overruns:0
           Interrupt:12 Base address:0x6000

eth1      Link encap:10Mbps Ethernet  HWaddr 00:30:4F:09:1C:BC
           inet addr:192.168.0.1  Bcast:192.168.0.255  Mask:255.255.255.0
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:1 errors:0 dropped:0 overruns:0
           TX packets:1 errors:0 dropped:0 overruns:0
           Interrupt:11 Base address:0x6100

--------------route---------------------
Kernel routing table
Destination     Gateway         Genmask         Flags MSS    Window Use 
Iface
broadcast       *               255.255.255.255 UH    1500   0        0 eth1
192.168.0.0     *               255.255.255.0   U     1500   0        0 eth1
87.207.142.0    *               255.255.254.0   U     1500   0        0 eth0
127.0.0.0       *               255.0.0.0       U     3584   0        0 lo
default         chello087207142 *               UG    1500   0        0 eth0


------- cat /etc/system.cfg
# [System]
ROUTER=ethernet         #    dialup/leased/ethernet/bridge
HOSTNAME=router         #611 Router name
DOMAIN=siec             #612 Local domain
ENAMSQ=n                #11 NAT/firewall
XTRAPTS=""      #Extra stealthed ports
ENAPING=y               #112 ICMP responses
ENABRG=n                #12 Bridging mode
BIGMEM=n                #13 ile command line history
RAMDRIVE=n              #19 Enable ram disk
RESRAM=n                #191 Restrict ram disk size to 4MB
SAVERS=0,0              #14 Savers screen,hdd. 0 = off
SWPSIZE=0               #15 Swap size in MB. 0 = off
LOGSIZE=50000,5000      #16 System,logins log sizes
SAVLOG=n                #163 Save system logs
ENABEEP=n               #17 beeps
ENAMON=n                #20 flashing leds
COLORS=y                #21 console colors
ENAPNP=n                #22 ISA PnP
DEFISP=         # Default dialup ISP
RDONLY=n                #10 run in ram with no disk usage

# [Log/Debug]
LOGDHCP=n       #18 DHCP server
DHCPLOG=n       #180 DHCP client
LOGDNS=n        #181 DNS
LOGHTTP=y       #182 HTTP/control
LOGCHAT=n       #183 chat
LOGPPPD=n       #184 pppd
LOGDIALD=n      #185 diald
LOGIDENT=s      #186 ident
LOGNET=1        #187 Netmeeting
LOGFTP=s        #188 FTP
LOGFIRE=s       #189 firewall

# [Services]
ENADNS=n                #41 DNS Server
DNSCACHE=300            #411 URL's to cache. 0 = disable
ENACRON=n               #42 Cron daemon
ENADHCP=y               #431 DHCP server
WINSADDR=               #432 WINS address (if external)
LIZTIME=604800,604800   #433 lease-time,max-lease-time
ENAWWW=n                #441 HTTP Server
WWWPORT=80              #442 port
USRWWW=         #443 User web pages
RESWWW=         #444 Bandwidth
RESVAL=         #445 Bytes per second
ENAWWA=s                #451 Control via HTTP
WWAPORT=82              #452    port
TIMADDR=        #453 Timeserver URL, empty = disable
TIMZONE=-0000           #454    Offset to UTC
ENALPD=n                #461 Print Server
ENASSHD=n               #47 SSH server
SSHP=22         #471 port
RTSSH=y         #472 allow root
SSHCMD=                 #73 Extra command line options
ENADYNDNS=n             #49 dynamic name client
ENADYNIP=y              #491 dyndns local URL
ENAID=n                 #50 ident server
ENAFTP=n                #51 FTP Server
FTPPORT=21              #512 port
FTPCON=5                #513 FTP connections
FTPANON=n               #514 anonymous FTP
ROOTFTP=y               #515 allow root
ENARAS=n                #52 dialin
MAILLOG=n       #531 Mail logs
MAILIP=n                #532 Mail IP
EMLADDR=""      #533 Log/IP recipient
EMLSVR=""       #534 Mail server
PKGDOMAIN=http://www.FREESCOsoft.net/home/0.3.x/  # package domain
PKGDIR=/www/packages    # package save directory


# [ Print server #1 ]
ALLOWED0=1              # IP match
LPPORT0=515
LPDEV0=lp1

# [Security]
TRUSTN0=y               #251 Trust net0
TRUSTN1=y               #251 Trust net1
TRUSTMD=n               #252 Trust dial IN
MDLCU=n         #261 Load cuseeme
MDLIC=n         #262 Load icq
MDLRA=n         #263 Load raudio
MDLVD=n         #264 Load vdolive
MDLQU=n         #265 Load quake
MDLIR=n         #266 Load irc
MDLFT=n         #267 Load ftp
MDLNE=n         #268 Load netmeeting

# [Hardware COM Ports]

# [Modems]

# [ diald ]

# [ethernet/leased/printer/ras router]
GATEWAY=87.207.142.1    #62 631 gateway
DNSADDR=62.179.1.60             #414 Primary DNS
DNSADDR1=62.179.1.61            #415 Second DNS
DNSADDR2=               #415 Third DNS
DNSADDR3=               #415 Forth DNS
PROXY=""                #914 HTTP proxy addr[:port]

# [Ethernet hardware]
IO0=0
IRQ0=0
IO1=0
IRQ1=0

# [Network 0]
USEDHCP0=y              #627 DHCP client
DHCPDNS=y               #628 DNS via DHCP
INTNAME0=eth0           # Interface
IPADDR0=87.207.143.212  # IP address
NETMASK0=255.255.254.0  # Netmask
NETWORK0=87.207.142.0   # Network address
BRDCAST0=255.255.255.255        # Broadcast address
IPRANGE0=""     # DHCP server IP range

# [Network 1]
INTNAME1=eth1           # Interface
IPADDR1=192.168.0.1     # IP address
NETMASK1=255.255.255.0  # Netmask
NETWORK1=192.168.0.0    # Network address
BRDCAST1=192.168.0.255  # Broadcast address
IPRANGE1="192.168.0.200 192.168.0.253"  # DHCP server IP range

------- cat /etc/live.cfg --------
BOOTMOD=
VERSION=0.3.4
BOOTDEV=fd
BOOTIME="Sun Oct 02 19:48:28  2005"
IPADDR0=87.207.143.212
NETMASK0=255.255.254.0
BRDCAST0=255.255.255.255
NETWORK0=87.207.142.0
GATEWAY=87.207.142.1
DNSADDR=62.179.1.60
DNSADDR1=62.179.1.61


------ cat /etc/dhcpc/dhcpcd-eth0.info ------
IPADDR=87.207.143.212
NETMASK=255.255.254.0
NETWORK=87.207.142.0
BROADCAST=255.255.255.255
GATEWAY=87.207.142.1
HOSTNAME='router'
DOMAIN='chello.pl'
DNS=62.179.1.60,62.179.1.61
DHCPSID=10.128.1.64
DHCPGIADDR=87.207.142.1
DHCPSIADDR=10.128.1.64
DHCPCHADDR=00:E0:7D:86:AA:7A
DHCPSHADDR=00:D0:2B:76:41:A9
DHCPSNAME=''
LEASETIME=169809
RENEWALTIME=84904
REBINDTIME=148582
INTERFACE='eth0'
CLASSID='Linux 2.0.39 i486'
CLIENTID=00:E0:7D:86:AA:7A


Pozdrawiam

Technical Details

Message-ID: <dhrf5a$8cu$1@achot.icm.edu.pl>

Path: mbox-mo1.pugleaf.net!news-archive.icm.edu.pl!news2.icm.edu.pl!not-for-mail

References: <dhotvm$o8u$1@achot.icm.edu.pl> <dhp0f5$j96$1@atena.e-wro.net>

Show Full Headers

Complete Article Headers

Path: mbox-mo1.pugleaf.net!news-archive.icm.edu.pl!news2.icm.edu.pl!not-for-mail
From: caldemeyn <caldemeyn@o2.pl>
Newsgroups: alt.pl.freesco
Subject: Re: Problem z konfiguracją routera,
 proszę o pomoc.
Date: Mon, 03 Oct 2005 16:41:36 +0200
Organization: http://news.icm.edu.pl/
Lines: 211
Message-ID: <dhrf5a$8cu$1@achot.icm.edu.pl>
References: <dhotvm$o8u$1@achot.icm.edu.pl> <dhp0f5$j96$1@atena.e-wro.net>
NNTP-Posting-Host: chello087207143102.chello.pl
Mime-Version: 1.0
X-Trace: achot.icm.edu.pl 1128349675 8606 87.207.143.102 (3 Oct 2005 14:27:55 GMT)
X-Complaints-To: abuse@icm.edu.pl
NNTP-Posting-Date: Mon, 3 Oct 2005 14:27:55 +0000 (UTC)
In-Reply-To: <dhp0f5$j96$1@atena.e-wro.net>
X-Accept-Language: en-us, en
User-Agent: Mozilla Thunderbird 1.0.7 (X11/20050923)
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Reply to Parent Message