🚀 go-pugleaf

 Witam.
Podepnę się pod temat. Laptop Fujitsu Siemens Lifebook C 1020 , karta: S3 
Inc. VT8375 [ProSavage8 KM266/KL266], na sterowniku xorg-a "savage".
Xorg.conf:

Section "Files"
EndSection

Section "Module"

Load "i2c"
Load "bitmap"
Load "ddc"
Load "dbe"
Load "glx"
Load "extmod"
Load "dri"
Load "freetype"
Load "int10"
#Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"pl"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Identifier	"Synaptics Touchpad"
	Driver		"synaptics"
	Option		"SendCoreEvents"	"true"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"auto-dev"
	Option		"HorizScrollDelta"	"0"
EndSection

Section "Device"
	Identifier	"S3_1"
	Driver 		"savage"
	BusID		"PCI:1:00:0"
	#Option "XAANoOffscreenPixmaps" "true"
	#Option "RenderAccel" "true"
	#Option "BackingStore" "true"
	screen 0
EndSection

Section "Device"
	Identifier	"S3_2"
	Driver		"savage"
	BusID		"PCI:1:00:0"
	#Option "XAANoOffscreenPixmaps" "true"
	#Option "RenderAccel" "true"
	#Option "BackingStore" "true"
	Option "MonitorLayout" "CRT,LFP"
	screen 1
EndSection

Section "Monitor"
	Identifier	"Monitor1"
	#Option		"DPMS"
	HorizSync	28-49
	VertRefresh	43-72
EndSection

Section "Monitor"
	Identifier	"Monitor2"
	#Option		"DPMS"
	HorizSync	28-49
	VertRefresh	43-72
EndSection

Section "Screen"
	Identifier	"First"
	Device		"S3_1"
	Monitor		"Monitor1"
	DefaultDepth	24
	SubSection "Display"
		Depth 24
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier	"Second"
	Device		"S3_2"
	Monitor		"Monitor2"
	DefaultDepth	24
	SubSection "Display"
		Depth 24
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"single"
	Screen 0 "First"  0 0
	InputDevice	"Generic Keyboard" "CoreKeyboard"
	InputDevice	"Configured Mouse" "AlwaysCore"
	InputDevice	"Synaptics Touchpad"
	#Option "AIGLX" "true"
EndSection

Section "ServerLayout"
	Identifier	"multi"
	Screen  "First" 
	Screen  "Second" RightOf "First"
	InputDevice	"Generic Keyboard" "CoreKeyboard"
	InputDevice	"Configured Mouse" "AlwaysCore"
	InputDevice	"Synaptics Touchpad"
	Option "Xinerama" "on"
	#Option "AIGLX" "true"
EndSection

Section "ServerLayout"
	Identifier	"one"
	Screen "First"
	Screen "Second" LeftOf "First"
	InputDevice	"Generic Keyboard" "CoreKeyboard"
	InputDevice	"Configured Mouse" "AlwaysCore"
	InputDevice	"Synaptics Touchpad"
	Option "Xinerama" "on"
	#Option "AIGLX" "true"
EndSection

Section "ServerFlags"
    Option "Xinerama" "True"
    Option "DefaultServerLayout" "multi"
EndSection


Section "DRI"
Mode 0666
EndSection

Section "Extensions"
#Option "Composite" "Enable"
#Option "RENDER" "Enable"
#Option "DAMAGE" "Enable"
EndSection 

Dostaje komunikat: Requested Entity already in use.
Przekopalem juz pare kilo howto w necie i ni groma nie potrafie tego 
ruszyc.. :/