🚀 go-pugleaf

pawell32 pisze:
> Witam.
> 
> Może i ten temat już był, lecz nie trafiłem dokładnie na to co
> potrzebuje. Otóż przechodzę na Debiana, zaistalowałem 4.0 r6 64,
> KDE 3.5.5, karta graficzna GF7300, i potrzebuje uruchomić obsługę dwóch
> monitorów. W chwili obecnej obydwa monitory wyświetlają to samo, ale
> potrzebuje większej przestrzenie roboczej.
> 
> Pozdrwaiam
Musisz sobie skonfigurowac odpowiednio xorg.conf, ja swego czasu na
Debianie to robilem, niestety nie posiadam juz konfiga xorga z niego.

Na moim gentoo dzialam na dwoch monitorach, ale na kazdym z nich jest
uruchomiona i sesja X-ów. Zapodaje konfiga, przerob sobie go dla
wlasnych potrzeb.


# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder58)  Wed Oct  1
15:12:53 PDT 2008


Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "InputDevice"
    # generated from data in "/etc/conf.d/gpm"
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol"
    Option         "Device" "/dev/input/mice"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

# Monitor section for CRT2 (master head
#
Section "Monitor"

        Identifier   "CRT2"
        VendorName   "Monitor Vendor"
        ModelName    "My CRT2 device"

# VertRefresh & HorizSync:
# # This decribes CTZ2; if CRT2 is LCD or TV, the driver will ignore the
# # values given here. You only need to set these if you use CRT2 as
secondary
# # (analog) VGA and your monitor does not support DDC2.
#
#

#        VertRefresh  60-75
#        HorizSync    30-90
EndSection

# Monitor section for CRT1 (slave head)
#
Section "Monitor"
        Identifier  "CRT1"
        VendorName  "Monitor Vendor"
        ModelName   "My VGA monitor"


# These values are actually used to determine the resolution/refresh rates
# # to be used on CRT1! If your monitor supported DDC2, you can leave these
# # out.
#
        VertRefresh 60-75
        HorizSync   30-90
        Option      "DPMS"
EndSection

# ----------------------------------------------------------
# # DEVICE sections
# # ----------------------------------------------------------
# # This section contains configuration data of the video card.
#
# # Device section for CRT2 (master head) --------------------
#
Section "Device"

        Identifier "SiS chip-1"
        VendorName "SiS"  # Value does not matter
        BoardName  "SiS"  # value does not matter

        Driver     "sis"
        Option         "EnableSiSCtrl"   "yes"
        #Option "ForceCRT2Type" "TV"
        #
        ## Since this is the driver section for CRT2, options for
adjusting the TV
        ## image (such as TVStandard, CHTVOverscan, etc) should be
placed in this
        ## section (and not the Device section for CRT1 below)
        #
        ## Generally: Set as many options as possible in this device
section,
        ## not the one for CRT1. CRT2 is initialized first (thus the term
# "master head") and its settings rule in many cases over the one
# # given in the slave device's (CRT1) section. The only exceptions for
# # this rule are all gamma correction and Xv related options, see below.
#
# # For dual head mode, BusID has to be specified! Check this using lspci!
#
        BusID           "PCI:1:00:0"
# "Screen" selects the screen number for this device in dual head mode
# # Screen 0 is master (always CRT2)
#
#
        Screen          0

EndSection

# Device section for CRT1 (Slave head) --------------------
#
Section "Device"
        Identifier      "SiS chip-2"

        Driver          "sis"

# For dual head mode, BusID must be specified!
#
        BusID           "PCI:1:00:0"

# Generally: Set all the options you need in the master
# # section, not here. See above. The only exeptions to this
# # rule are all Xv and gamma correction related options, such as
#         #Option "CRT1Gamma" "false"
#                 #Option "StoredGammaBrightness" "1.1 1.1 1.1"
#                         #Option "StoredGammaPreBrightness" "1.2 1.2 1.2"
#                                 #Option "XvGamma" "1.0 1.2 0.8"
#                                         #Option "XvDefault..."
#
#                                         # "Screen" selects the screen
number for this device in dual head mode
#                                         # Screen 1 is slave (always
CRT1 = external VGA)

        Screen          1
        Option         "EnableSiSCtrl"   "yes"
EndSection


# ----------------------------------------------------------
# # SCREEN section(s)
# # ----------------------------------------------------------
# # This section defines the available resulutions and depths.
#
# # Screen section for CRT2 (LCD/Plasma/DVI-D, TV, VGA2/DVI-A)
#

Section "Screen"
        Identifier "Screen1"
        Device     "SiS chip-1"
        Monitor    "CRT2"
        DefaultDepth 24
        Option         "AddARGBVisuals" "True"
        Option         "AllowGLXWithComposite" "True"
        Option         "RenderAccel" "True"
        Option         "AddARGBGLXVisuals" "True"
        SubSection "Display"
                Depth     24
                Modes     "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

# Screen section for CRT1 (VGA)
#
# # DefaultDepth must be identical to master screen if using Xinerama.
# # Otherwise, depths can be different.
# # A depth of 8 is not supported in dual head mode.
# # Resolutions can be different.
#
Section "Screen"
        Identifier "Screen2"
        Device     "SiS chip-2"
        Monitor    "CRT1"
        DefaultDepth 24
        Option         "AddARGBVisuals" "True"
        Option         "AllowGLXWithComposite" "True"
        Option         "RenderAccel" "True"
        Option         "AddARGBGLXVisuals" "True"


        SubSection "Display"
                Depth 24
                Modes "1024x768" "800x600" "640x480"
        EndSubSection
EndSection


Section "ServerLayout"
        Identifier      "Default Layout"

# Now enable dual head mode:
#
        Screen          "Screen1"
        Screen          "Screen2" LeftOf "Screen1"

# This enables Xinerama. If you don't set this to "on", startx will spawn
# # two indepentent X sessions. In Xinerama mode, both screens are virtually
# # one screen and only one X session is started.
#         Option          "Xinerama" "on"

                 InputDevice     "Keyboard0"
                 InputDevice     "Mouse0"
#                 InputDevice     "USB Mouse"
                                 EndSection

#                                 Section "DRI"
#                                         Mode    0666
#                                         EndSection


Section "Extensions"
        Option "Composite" "Enable"
EndSection


-- 
Pozdrawiam
Marcin vel "Norton"