Article View: alt.pl.comp.os.linux.debian
Article #17915RTL8180L
From: Paweł Walaszek
Date: Wed, 08 Oct 2003 01:45
Date: Wed, 08 Oct 2003 01:45
154 lines
8015 bytes
8015 bytes
Witam Jakiś czas temu pisałem już na ten temat na grupę, ale nie otrzymałem satysfakcjonującej odpowiedzi, a w necie nic na ten temat nie mogę znaleźć. A jak sprawa wygląda już opisuję: Ściągnąłem ze strony RealTek'a najnowszą paczuszkę dla gcc 3.x, rozpakowałem, przeedytowałem Makefile w nast. sposób: KERNELRELEASE=2.4.22 INCLUDEPATH=-I /usr/src/linux-$(KERNELRELEASE)/include/ XCC = gcc LD = ld MODCFLAGS := -O6 -Wall -DMODULE -D__KERNEL__ -DLINUX IO_FLAGS = RTL_IO_MAP ENDIAN_FLAGS = RTL_LITTLE_ENDIAN DRV_FLAGS = RTL_ACT_AS_STA RTL8180_TARGET = rtl8180_24x.o ... itd (reszta pozostaje standardowo) Skompilowałem poleceniem make. Załadowałem moduł insmod -f rtl8180_24x.o, otrzymałem komunikat: Warning: loading rtl8180_24x.o will taint the kernel: forced load See http://www.tux.org/lkml/#export-tainted for information about tainted modules Module rtl8180_24x loaded, with warnings ale modulik się załadował. Aby podnieść interfejs wykonuję: /sbin/iwpriv wlan0 wlan_para ssid2scan=czarnieckiego /sbin/iwpriv wlan0 wlan_para networktype=adhoc /sbin/iwpriv wlan0 wlan_para encmode=wep /sbin/iwpriv wlan0 wlan_para wepmode=wep40,wepdkeyid=0,wepkey40_1=6666666666 /sbin/iwpriv wlan0 enable /sbin/ifconfig wlan0 192.168.5.2 I zasadniczo jest wszytko ok, ale 1/ nie pinguje się 192.168.5.1 (a powinien bo na pewno istnieje, bo spod XP go widzę) 2/ w logach mam coś takiego: Oct 8 03:33:16 kickstand kernel: Oct 8 03:33:16 kickstand kernel: Oct 8 03:33:16 kickstand kernel: ******** RTL8180 Wireless Lan Driver 2003-06-11 loaded******** Oct 8 03:33:16 kickstand kernel: PCI: Found IRQ 5 for device 00:0f.0 Oct 8 03:33:16 kickstand kernel: PCI: Sharing IRQ 5 with 00:02.2 Oct 8 03:33:16 kickstand kernel: RTL8180: 00:0f.0: region #0 IS a PIO resource! Oct 8 03:33:16 kickstand kernel: RTL8180: request_region(0x0000d000,0x00000100) ! Oct 8 03:33:16 kickstand kernel: RTL8180: STA is NOT acting as AP! Oct 8 03:33:16 kickstand kernel: RTL8180: LITTLE_ENDIAN memory access Oct 8 03:33:16 kickstand kernel: RTL8180: station mode eeprom info Oct 8 03:33:16 kickstand kernel: RTL8180: EEpromAddressSize = 6! Oct 8 03:33:16 kickstand kernel: RTL8180: eepromID = 0x8129 Oct 8 03:33:16 kickstand kernel: RTL8180: EEPROMVersion = 0x0102 Oct 8 03:33:16 kickstand kernel: RTL8180: Tx Power Level, channel 0 = 0xdd Oct 8 03:33:16 kickstand kernel: RTL8180: Tx Power Level, channel 1 = 0xdd Oct 8 03:33:16 kickstand kernel: RTL8180: Tx Power Level, channel 2 = 0xdd Oct 8 03:33:16 kickstand kernel: RTL8180: Tx Power Level, channel 3 = 0xdd Oct 8 03:33:16 kickstand kernel: RTL8180: Tx Power Level, channel 4 = 0xdd Oct 8 03:33:16 kickstand kernel: RTL8180: Tx Power Level, channel 5 = 0xdd Oct 8 03:33:16 kickstand kernel: RTL8180: Tx Power Level, channel 6 = 0xdd Oct 8 03:33:16 kickstand kernel: RTL8180: Tx Power Level, channel 7 = 0xdd Oct 8 03:33:16 kickstand kernel: RTL8180: Tx Power Level, channel 8 = 0xdd Oct 8 03:33:16 kickstand kernel: RTL8180: Tx Power Level, channel 9 = 0xdd Oct 8 03:33:16 kickstand kernel: RTL8180: Tx Power Level, channel 10 = 0xdd Oct 8 03:33:16 kickstand kernel: RTL8180: Tx Power Level, channel 11 = 0xdd Oct 8 03:33:16 kickstand kernel: RTL8180: Tx Power Level, channel 12 = 0xdd Oct 8 03:33:16 kickstand kernel: RTL8180: Tx Power Level, channel 13 = 0xdd Oct 8 03:33:16 kickstand kernel: RTL8180: ChannelPlan = 0x0002 Oct 8 03:33:16 kickstand kernel: RTL8180: RFChipID = 0x0003 Oct 8 03:33:16 kickstand kernel: RTL8180: EEPROMVersion > 0x0101 Oct 8 03:33:16 kickstand kernel: RTL8180: AntennaDiversity = FALSE Oct 8 03:33:16 kickstand kernel: RTL8180: CSThreshold = 0x000b Oct 8 03:33:16 kickstand kernel: RTL8180: DigitalPhy = FALSE Oct 8 03:33:16 kickstand kernel: RTL8180: DefaultAntennaB = TRUE Oct 8 03:33:16 kickstand kernel: RTL8180: CSMethod = RCR_EnCS1 Oct 8 03:33:16 kickstand kernel: RTL8180: wlan driver loaded. ioaddr=0xd000, irq=5, MAC_addr=0:50:fc:d1:43:d5 Oct 8 03:36:28 kickstand kernel: RTL8180: Use RTL private command [ssid2scan] Oct 8 03:36:28 kickstand kernel: RTL8180: Use RTL private command [networktype] Oct 8 03:36:28 kickstand kernel: RTL8180: Use RTL private command [encmode] Oct 8 03:36:28 kickstand kernel: RTL8180: Set encryptmode = WEP Oct 8 03:36:28 kickstand kernel: RTL8180: Use RTL private command [wepmode] Oct 8 03:36:28 kickstand kernel: RTL8180: Set wepmode = ON <WEP40> Oct 8 03:36:28 kickstand kernel: RTL8180: Use RTL private command [wepdkeyid] Oct 8 03:36:28 kickstand kernel: RTL8180: Set WEP default key id = 0 Oct 8 03:36:28 kickstand kernel: RTL8180: Use RTL private command [wepkey40_1] Oct 8 03:36:28 kickstand kernel: RTL8180: Set WEP40 [1]th default key = 6666666666 <in hex> Oct 8 03:36:28 kickstand kernel: RTL8180: Set WEP40 [1]th default key = 66 66 66 66 66 <in hex> Oct 8 03:36:28 kickstand kernel: RTL8180: ------ Enable wlan driver ------ Oct 8 03:36:28 kickstand kernel: RTL8180: WLAN driver version 1.3 Oct 8 03:36:28 kickstand kernel: RTL8180: wireless LAN controller RTL8180 + philips RF. Oct 8 03:36:28 kickstand kernel: RTL8180: PHILIPS_Config() Oct 8 03:36:28 kickstand kernel: RTL8180: PHILIPS_Config() - Analog mode Oct 8 03:36:28 kickstand kernel: RTL8180: ENABLE_RTL_DCST Oct 8 03:36:28 kickstand kernel: RTL8180: Set dot11PrivacyInvoked = 1. Oct 8 03:36:28 kickstand kernel: RTL8180: encryptmode = RTL_ENC_WEP Oct 8 03:36:28 kickstand kernel: RTL8180: wepkeymode = WEP_MODE_ON_40 Oct 8 03:36:28 kickstand kernel: RTL8180: Turn on hardware WEP. SCR = 0x3 Oct 8 03:36:29 kickstand kernel: RTL8180: Select a BSS and Join it at channel 1. Oct 8 03:36:30 kickstand kernel: RTL8180: Receive ICV error! Oct 8 03:36:30 kickstand kernel: RTL8180: Receive ICV error! Oct 8 03:36:30 kickstand kernel: IBSSJoin(): Please check out the following ... Oct 8 03:36:30 kickstand kernel: IBSSJoin(): BSSID = 0x02:0xe0:0x8c:0x37:0x6a:0x10 Oct 8 03:36:30 kickstand kernel: IBSSJoin(): SSID = czarnieckiego Oct 8 03:36:30 kickstand kernel: IBSSJoin(): dot11BeaconPeriod = 100 Oct 8 03:36:30 kickstand kernel: IBSSJoin(): dot11DtimPeriod = 255 Oct 8 03:36:30 kickstand kernel: IBSSJoin(): dot11OperationalRates = 0x0f Oct 8 03:36:30 kickstand kernel: IBSSJoin(): mCap = 0x32 Oct 8 03:36:30 kickstand kernel: RTL8180: Act_UpdateBeaconFrame...... Oct 8 03:36:30 kickstand kernel: RTL8180: TIM_setup...... Oct 8 03:36:31 kickstand kernel: RTL8180: Receive ICV error! Co robię nie tak ? Możecie dać jakąś wskazówkę, bo już mi pomysłów braknie a nic wygooglać sensownego nie idzie ? Dodam jeszcze tylko, że kombinuję z tym pod Debianem Sarge'm z jajkiem 2.4.22. Pozdrawiam i z góry dzięki za wszelkie info -- --------------------------- ------------------------------------ | Paweł Walaszek | Używasz Linuxa? Zarejestruj się: | | | http://counter.li.org/ | --------------------------- ------------------------------------
Technical Details
Message-ID:
<blvq78$t00$1@inews.gazeta.pl>Path:
mbox-mo1.pugleaf.net!news-archive.icm.edu.pl!news.rmf.pl!news.ipartners.pl!news2.icm.edu.pl!newsfeed.gazeta.pl!news.gazeta.pl!not-for-mailShow Full Headers
Complete Article Headers
Path: mbox-mo1.pugleaf.net!news-archive.icm.edu.pl!news.rmf.pl!news.ipartners.pl!news2.icm.edu.pl!newsfeed.gazeta.pl!news.gazeta.pl!not-for-mail From: Paweł Walaszek <fizol126@gazeta.pl> Newsgroups: alt.pl.comp.os.linux.debian Subject: RTL8180L Date: Wed, 08 Oct 2003 03:45:12 +0200 Organization: Portal Gazeta.pl -> http://www.gazeta.pl Lines: 155 Message-ID: <blvq78$t00$1@inews.gazeta.pl> NNTP-Posting-Host: baluty.pdi.net Mime-Version: 1.0 X-Trace: inews.gazeta.pl 1065577515 29696 213.146.50.110 (8 Oct 2003 01:45:15 GMT) X-Complaints-To: usenet@agora.pl NNTP-Posting-Date: Wed, 8 Oct 2003 01:45:15 +0000 (UTC) X-Accept-Language: pl, en-us, en X-User: fizol126 User-Agent: Mozilla/5.0 (X11; U; Linux i686; pl-PL; rv:1.5b) Gecko/20030827 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit