🚀 go-pugleaf

BigMak <big...@ibl.bm> wrote in message
news:38c8240a$0$20103@wodc7nh1.news.uu.net...
>     Thanks for the help guys. However I have another problem. I don't have
> the setblaser line in my autoexec.bat or dosstart.bat cause it loads a
file
> called AU30DOS.com. I don't know how to edit the DMA to use in DOS. I will
> just make a shortcut if I can find a way to change the DMA/IRQ in dos
mode.
>
> Thanks in advance
>
> BigMak
>
>

Hi BigMak,
  Have you tried adding a SET BLASTER line? (Don't forget to add the
variables at the end of the setblaster line)

In my computers AUTOEXEC.BAT file, the sound-related lines look like this:
@ECHO OFF
SET BLASTER=A220 I7 D1 H5 P330  T6    <-- Add this line BEFORE AU30DOS.com
SET CTSYN=C:\WINDOWS
C:\PROGRA~1\CREATIVE\SBLIVE\DOSDRV\SBEINIT.COM <-- My Soundblaster Live DOS
startup program.

So on MY setblaster line, I'm using Interrupt 7 (I7) and DMA 1 (D1). I
believe the P330 is the hex address for my music card. I don't know what the
H5 and T6 stand for. AUTOEXEC.BAT is in the root directory of your C: drive
and it executes when you do a cold startup or reset. There's another batch
files called DOSSTART.BAT in your windows directory that does the same thing
when you shut down from windows in to DOS. Don't forget to edit this file
too, if that's how you start a DOS session. :o)

--Nut