🚀 go-pugleaf

Kadewar wrote:
> 
> Hi dukerz!
> just bought SB-PCI-128 but can get it work under DOS. windows sais it has
> irq 11
> but when i try to set irq 11 in duke-setup its not working. i tried to
> change irq in window$-hardware-manager but i just got the message "this
> setting can't be changed".
> i found a "readme"-file which told me that irq could be changed in the
> BIOS....well, i dunno nothing bout BIOS so i don't want to do something
> wrong there.
> is there another way to get the card to work?
> i also tried to boot in DOS-mode but Duke-setup didn't find the card.
> 
> autoexec.bat:
> 
> @ECHO OFF
> SET BLASTER=A220 I7 D1 H5 P330 T6
> SET SBPCI=C:\SBPCI
> PROMPT $p$g
> PATH C:\WINDOWS;C:\WINDOWS\COMMAND;C:\DOS;c:\dos\mouse
> SET TEMP=C:\WINDOWS\TEMP
> mode con codepage prepare=((850) C:\WINDOWS\COMMAND\ega.cpi)
> mode con codepage select=850
> keyb gr,,C:\WINDOWS\COMMAND\keyboard.sys
> 
> config.sys:
> 
> DEVICE=C:\WINDOWS\HIMEM.SYS
> DEVICE=C:\WINDOWS\EMM386.EXE NOEMS
> DOS=UMB
> DEVICEHIGH /L:2,12240 =C:\WINDOWS\SETVER.EXE
> DOS=HIGH
> device=C:\WINDOWS\COMMAND\display.sys con=(ega,,1)
> Country=049,850,C:\WINDOWS\COMMAND\country.sys
> 
> Thanx in advance,
>        Kade.
> (remove "spam" to reply via email)

You have my sympathies I have a similar problem but haven't had a chance
to follow up on it yet.  first you need to double check your settings. 
you need to check the settings for the creative sound blaster PCI128
legacy card not the regular card entry.  Are you running in a DOS Window
or in MS DOS mode.  you need to put the statement apinit in there
someplace.  I'm not sure where.  It's in a help file someplace.  I'm not
sure where though.  I think it's in the autoexec.bat but if it needs a
load or device statement.

-- 
----------------------------------------------------

                  Darrell Mayeda
                drma...@pixi.com



    NOTE:  I'm tired of all the spam in my mailbox please leave my last
name in the body of your reply.  Thanks