🚀 go-pugleaf

atz is the modem reset string. it is not an init string. if you're
using that to dial out you're gonna have trouble. your modem drivers
should have the init string. look for an inf file and install it or if
you really have to go to the manufacturers website and see if they
list one you can type in.

On Sat, 6 Nov 1999 01:26:03 -0000, "Briggs, Mike & Donna"
<mbr...@mounet.com> wrote:

>Johnnnniee ,was there anything special that you had in your modem initz
>string . Right
>now the string on the modem I  am trying to get to work is AT  Z  This is
>the default string that was selected. I know I have my port and Irq selected
>correctly because the modem is addressed when trying to start up a game. You
>here the modem fire up to dial the number, but then the process stops and
>the
>number is not dialed. Thanks for the response to my post
>
>Johnnnniee <Johnnnn...@110.net> wrote in message
>news:3822F45C.1B3EBB91@110.net...
>> I had a winmodem and had no problems running a modem game.
>> I did have problems with lag and out of sync errors though
>> I was connecting at 28.8
>> But I was using a 166mhz pentium with 48mb memory
>> I now have a 400mhz pentium 2 with 192mb memory and it runs great
>> I still connect at 28.8 becuase I live in the sticks   but the game runs
>> perfect
>> I think I've gotten 1 out of sync error in 2 or 3 hundred hours of modem
>play
>>
>> Hope this helps
>>
>> "Briggs, Mike & Donna" wrote:
>>
>> > After reading a lot of the post, I think I understand that if you have a
>> > winmodem in your pc and you are trying to run a Duke3d modem game it
>will
>> > not work.  Please advise me if I understand this correctly. Reply by my
>> > e-mail if you wish and thanks.
>> >
>> > Mike Briggs
>> > E-mail - mbr...@mounet.com
>>
>> --
>> Every day sends future to past
>> Every breathe leaves me one less to my last
>>
>> Johnnnniee Skim
>>
>>
>