🚀 go-pugleaf

I belive I got it working. I un-installed my drivers, installed them
from the SBlive disk (the manufacturer of my PC left a bunch of stuff
out when they did the install) and with the c:\command.com /c
c:\duke3d\duke3d.exe  stuff it works.
I don't understand why the Cammand.com stuff makes the differance, but
it does. Mine works with LW2 though, and I ain't about to change
anything!
Thanks for the help!

 (On Sun, 14 Nov 1999 21:33:20 GMT, (GTS) , with help from large doses
of Prozak wrote:

>I tried this, but it didn't work for me. What exactly does the
>C:\command.com /c C:\duke3d.deuk3d.exe do different that made the
>differance for you? I don't quite understand it!
>
>
>
>On Mon, 25 Oct 1999 22:31:52 -0400, "Richard" <rul...@erinet.com> ,
>with help from large doses of Prozak wrote:
>
>>If you are like me  --  I have been unable to get Duke3d to run
>>reliably on my Win98 computer with a SBLive! value sound card.  I have
>>seen any number of posts where Duke crashes especially where sound
>>reverberations cause a problem.  Nothing made sense to me, especially
>>'techno' explanations.
>>
>>WELL HERE'S WHAT WORKS FOR ME!!  (Hope it's simple enough to
>>understand.)
>>
>>I downloaded the complete LiveWare 3.0 update from: www.sblive.com
>>all four components are about 57meg in size.
>>
>>I use the following command within my regular 'Duke3D' shortcut icon:
>>"C:\command.com /c C:\games\duke3d\duke3d.exe"
>>
>>and the following command within my regular 'Setup' shortcut icon:
>>"C:\command.com /c C:\games\duke3d\setup.exe"
>>
>>My Duke3d folder/directory is under 'games' on MY hard drive.
>>'Duke3D' runs the regular Atomic Edition and I use the 'Setup'
>>shortcut to load user maps.  Pay CLOSE attention the precise typing
>>and spacing of the commands.  Your directory locations may vary.
>>
>>SO  --  Before I could not run all user maps on my 'new' machine
>>loaded as follows:
>>Pentium III 450mHz with 128meg RAM, Win98, and SBLive! value sound
>>card.
>>
>>Using the 'commands' above alone within my icons did not work with the
>>basic sound card on the machine (from Dell).  Installing the LiveWare
>>3.0 update by itself did not work.  Using BOTH  --  TOGETHER is like
>>magic.  Now the map(s) that gave me fits (crashes) before run fine.
>>Hope this helps.
>>
>>THANKS to Dick Gray and Steve Long.
>>
>>Richard.
>>
>>