🚀 go-pugleaf

This is easy.
1. Go to DOS
2. Rename DUKE3D.EXE to DUKE3D.BIN
3. type DEBUG DUKE3D.BIN
4. then type     -e200 58
   and           -e210 58
   and           -w
   then          -q
5. Now rename DUKE3D.BIN to DUKE3D.EXE
6. Edit the DUKE3D.CFG file
   Inside go to the line which has something like - Environment = "y"
7. Remove whats between the "" so theres nothing there.
8. Near his line you will see a line that says - Out = 1.
   Change it to - Out = 0;
9. Save it, and run DUKE3D.

Hope that helps, it sure helped me.
If you have trouble e-mail me.

John.