Thread View: alt.games.doom
4 messages
4 total messages
Started by chrisbazley
Mon, 30 Nov 2009 18:19
New PWAD containing single player map & graphics for Doom 2 - 'Rienzi'
Author: chrisbazley
Date: Mon, 30 Nov 2009 18:19
Date: Mon, 30 Nov 2009 18:19
45 lines
3793 bytes
3793 bytes
I have made some changes to my 'Rienzi' WAD to make it more playable
and less liable to run slowly or exceed static limits. (I failed in
the latter goal - certain areas of the map still suffer from 'Hall of
mirrors' in Jeffrey Doggett's source port http://jeffd.drobe.co.uk -
probably too many visible segs.)
Architecturally, the only obvious changes are that the BFG is now
somewhat inaccessible (lowered by a switch) and I have redesigned the
steps up to the cathedral's balconies (to block the line of sight
between inside and outside). There is also a new secret sector which
is intended to give cowardly players a nasty surprise, and I have
fixed a misaligned texture near the exit switch.
After trying various node builders, I settled on Marc Rousseau's
ZenNode. It seems to produce the best overall results, but only when
using the '-n2' option ('Minimize BSP depth'). The default algorithm
('-n1') produces a massive glitch in the volcano crater! Colin Reed
and Lee Killough's BSP and Randy Heit's ZDBSP produce minor glitches
in different places (vertical columns of pixels filled with unbounded
floor/ceiling texture). I find fiddling around with node builders and
verifying that they produce acceptable results for the whole level to
be the most frustrating aspect of WAD design!
Despite feedback that the level was too easy, I have actually made it
slightly easier so that my brother and others who aren't Doom gods can
enjoy playing (I kept dying despite knowing what was coming). There
are 70 additional health points and I have redistributed both health
and ammunition bonuses to avoid unduly penalising certain route
decisions. There are fewer revenants on all skill levels (being
attacked by five on a precipitous staircase with no cover was just
silly). I also got rid of the lost souls in the volcano crater because
being obstructed or attacked by monsters far above or below is grossly
unfair!
The ratio of monster hitpoints to maximum ammo damage has been reduced
on all skill levels (from 0.504 to 0.483 on 'Ultra-violence').
However, ammunition is still fairly limited and I sometimes find
myself hacking my way to the exit switch with the chainsaw! I suppose
what is a sensible ratio depends partly on the level design: The
player is more likely to waste ammo fighting at long range;
conversely, monster placement which tends to promote in-fighting would
save ammo.
Any more feedback welcome, as always:
http://starfighter.acornarcade.com/...doom.htm#rienzi
Re: New PWAD containing single player map & graphics for Doom 2 - 'Rienzi'
Author: Volfie999
Date: Wed, 02 Dec 2009 03:27
Date: Wed, 02 Dec 2009 03:27
47 lines
3918 bytes
3918 bytes
On Nov 30, 1:19 pm, chrisbaz...@bigfoot.com wrote:
> I have made some changes to my 'Rienzi' WAD to make it more playable
> and less liable to run slowly or exceed static limits. (I failed in
> the latter goal - certain areas of the map still suffer from 'Hall of
> mirrors' in Jeffrey Doggett's source porthttp://jeffd.drobe.co.uk-
> probably too many visible segs.)
>
> Architecturally, the only obvious changes are that the BFG is now
> somewhat inaccessible (lowered by a switch) and I have redesigned the
> steps up to the cathedral's balconies (to block the line of sight
> between inside and outside). There is also a new secret sector which
> is intended to give cowardly players a nasty surprise, and I have
> fixed a misaligned texture near the exit switch.
>
> After trying various node builders, I settled on Marc Rousseau's
> ZenNode. It seems to produce the best overall results, but only when
> using the '-n2' option ('Minimize BSP depth'). The default algorithm
> ('-n1') produces a massive glitch in the volcano crater! Colin Reed
> and Lee Killough's BSP and Randy Heit's ZDBSP produce minor glitches
> in different places (vertical columns of pixels filled with unbounded
> floor/ceiling texture). I find fiddling around with node builders and
> verifying that they produce acceptable results for the whole level to
> be the most frustrating aspect of WAD design!
>
> Despite feedback that the level was too easy, I have actually made it
> slightly easier so that my brother and others who aren't Doom gods can
> enjoy playing (I kept dying despite knowing what was coming). There
> are 70 additional health points and I have redistributed both health
> and ammunition bonuses to avoid unduly penalising certain route
> decisions. There are fewer revenants on all skill levels (being
> attacked by five on a precipitous staircase with no cover was just
> silly). I also got rid of the lost souls in the volcano crater because
> being obstructed or attacked by monsters far above or below is grossly
> unfair!
>
> The ratio of monster hitpoints to maximum ammo damage has been reduced
> on all skill levels (from 0.504 to 0.483 on 'Ultra-violence').
> However, ammunition is still fairly limited and I sometimes find
> myself hacking my way to the exit switch with the chainsaw! I suppose
> what is a sensible ratio depends partly on the level design: The
> player is more likely to waste ammo fighting at long range;
> conversely, monster placement which tends to promote in-fighting would
> save ammo.
>
> Any more feedback welcome, as always:http://starfighter.acornarcade.com/...doom.htm#rienzi
Does the above link not work for anyone else? Or just me?
Re: New PWAD containing single player map & graphics for Doom 2 - 'Rienzi'
Author: Christopher Bazley
Date: Wed, 02 Dec 2009 13:13
Date: Wed, 02 Dec 2009 13:13
19 lines
1819 bytes
1819 bytes
In message <9ebef43f-fbc3-450f-9c4e-54c633232d94@f10g2000vbl.googlegro
ups.com>
Volfie999 <mooseboyskip@hotmail.com> wrote:
> On Nov 30, 1:19 pm, chrisbaz...@bigfoot.com wrote:
[snip]
>> Any more feedback welcome, as
>> always:http://starfighter.acornarcade.com/...doom.htm#rienzi
> Does the above link not work for anyone else? Or just me?
Sorry, the URL seems to have become mangled. :-( I suspect Google
Groups! It should be:
http://starfighter.acornarcade.com/mysite/doom.htm#rienzi
--
Chris Bazley
Star Fighter 3000: http://starfighter.acornarcade.com/
Re: New PWAD containing single player map & graphics for Doom 2 - 'Rienzi'
Author: Volfie999
Date: Wed, 02 Dec 2009 16:56
Date: Wed, 02 Dec 2009 16:56
24 lines
2111 bytes
2111 bytes
On Dec 2, 8:13 am, Christopher Bazley <christopher.baz...@blueyonder.co.uk> wrote: > In message <9ebef43f-fbc3-450f-9c4e-54c633232...@f10g2000vbl.googlegro > ups.com> > Volfie999 <mooseboys...@hotmail.com> wrote: > > > > > On Nov 30, 1:19 pm, chrisbaz...@bigfoot.com wrote: > [snip] > >> Any more feedback welcome, as > >> always:http://starfighter.acornarcade.com/...doom.htm#rienzi > > Does the above link not work for anyone else? Or just me? > > Sorry, the URL seems to have become mangled. :-( I suspect Google > Groups! It should be: > > http://starfighter.acornarcade.com/mysite/doom.htm#rienzi > > -- > Chris Bazley > Star Fighter 3000:http://starfighter.acornarcade.com/ danke
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads