🚀 go-pugleaf

I went, I saw, and I became flabbergasted.

I must say that the game shouldn't have to function on my Dell Insprion 9100
with the factory settings still intact.
It contains a 3.0MHz Intel P-IV
512 MB RAM
and
ATI Mobility Radeon 9700 with 128Mb Video RAM.

All this controlled by Windows XP Professional with all updates so far.
And DirectX 9.0c

It still freezes...:-((

--ZG--

-- 


Zadig Galbaras
A Perturbed Norwegian Agnostic


"M.W.H" <mapson_no@hotmail.com> skrev i melding
news:hQPTc.834$wZ3.10435711@news-text.cableinet.net...
> See if < http://ucguides.savagehelp.com/Doom3/FAQ_Instability.htm > helps
>
> HTH
>
> M.W.H
>
> "Zadig Galbaras" <zadig@zadig.no> wrote in message
> news:iuPTc.999$WW4.13890@news4.e.nsc.no...
> > Hi U all
> >
> > I got the game on friday 13.th, and that's what's causes a lot of
trouble
> I
> > guess :-))
> >
> > The game keeps on freezing. That is, the picture is freezing, but the
> sound
> > keeps going.
> > The only solution is to turn the computer off by holding down the
> OFF-button
> > in at least five seconds or so.
> >
> > It freezes during those movieclips.
> > I have gotten to sergant Kelly, and when he asks me to check out his
> screen,
> > my screen freezes.
> > The only way to get there is to press ESC every time those "out of body"
> > experiences starts, and the continue walking.
> > It's ok because my PDA tells me what to do.
> >
> > But why the freeze?
> >
> > I have upgraded DirectX to the 9c version.
> > I have chosen lowest screen resolution choice in the system settings
i.e.
> > 480*640 and the lowest possible setting on details.
> > I have disabled the upper most choice in the advanced window.
> > I have not reinstalled after upgrading DirectX. Should I?
> >
> > A cut from the DXDIAG.EXE logfile:
> > ------------------
> > System Information
> > ------------------
> > Time of this report: 8/15/2004, 21:44:14
> >        Machine name: FANUEL
> >    Operating System: Windows XP Professional (5.1, Build 2600) Service
> Pack
> > 1 (2600.xpsp2.031208-2000)
> >            Language: Norwegian (Bokmĺl) (Regional Setting: Norwegian
> > (Bokmĺl))
> > System Manufacturer: Dell Inc.
> >        System Model: Inspiron 9100
> >                BIOS: Phoenix ROM BIOS PLUS Version 1.10 A01
> >           Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz (2 CPUs), ~3.0GHz
> >              Memory: 512MB RAM
> >           Page File: 212MB used, 1468MB available
> >         Windows Dir: C:\WINDOWS
> >     DirectX Version: DirectX 9.0c (4.09.0000.0904)
> > DX Setup Parameters: Not found
> >      DxDiag Version: 5.03.0001.0904 32bit Unicode
> >
> > ---------------
> > Display Devices
> > ---------------
> >         Card name: ATI MOBILITY RADEON 9700
> >      Manufacturer: ATI Technologies Inc.
> >         Chip type: ATI MOBILITY RADEON 9700 AGP (0x4E50)
> >          DAC type: Internal DAC(350MHz)
> >        Device Key: Enum\PCI\VEN_1002&DEV_4E50&SUBSYS_017C1028&REV_00
> >    Display Memory: 128.0 MB
> >      Current Mode: 1920 x 1200 (32 bit) (60Hz)
> >           Monitor: Standardskjerm
> >
> >
> > ------------
> > DxDiag Notes
> > ------------
> >   DirectX Files Tab: No problems found.
> >       Display Tab 1: No problems found.
> >         Sound Tab 1: No problems found.
> >         Sound Tab 2: The file btaudio.sys is not digitally signed, which
> > means that it has not been tested by Microsoft's Windows Hardware
Quality
> > Labs (WHQL).  You may be able to get a WHQL logo'd driver from the
> hardware
> > manufacturer.
> >           Music Tab: No problems found.
> >           Input Tab: No problems found.
> >         Network Tab: No problems found.
> >
> > Can anyone of you experts out there help me?
> > Shall I reinstall after the Directx uppgrade?
> >
> >
> >
> >
> > -- 
> >
> >
> > Zadig Galbaras
> > A Perturbed Norwegian Agnostic
> >
> >
> >
>
>