Thread View: alt.games.descent
9 messages
9 total messages
Started by ZiggyPopp
Fri, 20 Aug 2004 01:43
Does anyone have the Space Orb config software?
Author: ZiggyPopp
Date: Fri, 20 Aug 2004 01:43
Date: Fri, 20 Aug 2004 01:43
8 lines
1140 bytes
1140 bytes
Hi all, I'm getting back to Descent after a long hiatus. I am hooked on my Space Orb (which I pulled out of the attic) but I'm not going to spend the time trying to set it up if I can't locate the software that Spacetec had on their web site to config the device. Thanks, ZP
Re: Does anyone have the Space Orb config software?
Author: Rich Adams
Date: Fri, 20 Aug 2004 16:55
Date: Fri, 20 Aug 2004 16:55
4 lines
1211 bytes
1211 bytes
http://www.planethardware.com/spaceorb/ Rich "another diehard orb user" Adams
Re: Does anyone have the Space Orb config software?
Author: ZiggyPopp
Date: Fri, 20 Aug 2004 21:52
Date: Fri, 20 Aug 2004 21:52
17 lines
1366 bytes
1366 bytes
Rich Adams wrote: > http://www.planethardware.com/spaceorb/ > > > Rich "another diehard orb user" Adams > > But the links to the software on this page are to dead Spacetec FTP sites? IIRC, what I need is this: ftp://ftp.spacetec.com/pub/spaceware/spaceorb/software/spo0481/spo_4_81.exe Any chance you have this file? Thanks!
Re: Does anyone have the Space Orb config software?
Author: Lance DeVooght
Date: Sat, 21 Aug 2004 02:07
Date: Sat, 21 Aug 2004 02:07
30 lines
2062 bytes
2062 bytes
ZiggyPopp wrote: > Rich Adams wrote: > >> http://www.planethardware.com/spaceorb/ >> >> >> Rich "another diehard orb user" Adams >> > > But the links to the software on this page are to dead Spacetec FTP sites? > > IIRC, what I need is this: > ftp://ftp.spacetec.com/pub/spaceware/spaceorb/software/spo0481/spo_4_81.exe > > Any chance you have this file? > > Thanks! > I use a "SpaceBall" on my IBM/AIX RS6000 CAD workstation. I think the software is called "SpaceWare". If this is the same company that made your hardware maybe I can get what you need from their rep. I'll try to remember to check into it when I get back to work on Monday. In the meantime, it might help if you gave me the model number and anything else that might help identify your equipment. Lance DeVooght
Re: Does anyone have the Space Orb config software?
Author: ZiggyPopp
Date: Sat, 21 Aug 2004 05:37
Date: Sat, 21 Aug 2004 05:37
21 lines
1845 bytes
1845 bytes
I have this model: http://tinyurl.com/4soxw It does not have a model number on the uint. It is marked "Spacetec IMC Corporation". The software that came with it was tough to use but, the web page did have a GUI that was great. > I use a "SpaceBall" on my IBM/AIX RS6000 CAD workstation. > I think the software is called "SpaceWare". > If this is the same company that made your hardware > maybe I can get what you need from their rep. > > I'll try to remember to check into it when I get back to work on Monday. > > In the meantime, it might help if you gave me the model number > and anything else that might help identify your equipment. > > Lance DeVooght >
Re: Does anyone have the Space Orb config software?
Author: Rich Adams
Date: Mon, 23 Aug 2004 19:49
Date: Mon, 23 Aug 2004 19:49
9 lines
1455 bytes
1455 bytes
----- Original Message ----- >> Any chance you have this file? Yes, I have that file. It is also here, but I don't know the hoops you have to jump through to get it: http://members.driverguide.com/driver/detail.php?driverid=16847
Re: Does anyone have the Space Orb config software?
Author: ZiggyPopp
Date: Tue, 24 Aug 2004 01:11
Date: Tue, 24 Aug 2004 01:11
20 lines
1705 bytes
1705 bytes
Rich Adams wrote: > ----- Original Message ----- > > >>>Any chance you have this file? > > > Yes, I have that file. > > It is also here, but I don't know the hoops you have to jump through to get > it: > http://members.driverguide.com/driver/detail.php?driverid=16847 > How frustrating! Too many hoops for me. Got about 5 levels of questions and software downloads and gave up. Any chance you can drop it off in a binary group? Or mail it to czeigler5++@comcast.net (remove ++)Please? Did I say please? Thanks
Re: Does anyone have the Space Orb config software?
Author: Lance DeVooght
Date: Tue, 24 Aug 2004 01:30
Date: Tue, 24 Aug 2004 01:30
35 lines
2346 bytes
2346 bytes
ZiggyPopp wrote: > I have this model: > http://tinyurl.com/4soxw > It does not have a model number on the uint. > It is marked "Spacetec IMC Corporation". > > The software that came with it was tough to use but, the web page did > have a GUI that was great. > > >> I use a "SpaceBall" on my IBM/AIX RS6000 CAD workstation. >> I think the software is called "SpaceWare". >> If this is the same company that made your hardware >> maybe I can get what you need from their rep. >> >> I'll try to remember to check into it when I get back to work on Monday. >> >> In the meantime, it might help if you gave me the model number >> and anything else that might help identify your equipment. >> >> Lance DeVooght >> > I'm sorry Ziggy, I think my lead is a dead end. I checked my software at work and it is from 3DConnection http://www.3dconnection.com and it is a Logitech Company. My device is labeled "SpaceBall 4000". Again, sorry that I couldn't help. Lance DeVooght
Re: Does anyone have the Space Orb config software?
Author: Rich Adams
Date: Tue, 24 Aug 2004 13:39
Date: Tue, 24 Aug 2004 13:39
11 lines
1502 bytes
1502 bytes
" Any chance you can drop it off in a > binary group? Or mail it to czeigler5++@comcast.net (remove ++)Please? Sent to comcast. That will be 2 dollars please. ra
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads