🚀 go-pugleaf

Should anyone be reading this in the future, I finally figured out the 
problem. Ver 1.0 of D3 did not work on Kali for me. My system is running 
Windows millenium (winme) pentium III with a 3dfx Voodoo 5 card. I 
believe the problem was the version of Descent. Now, here's the real 
kicker, I had attempted to patch the game up to 1.4. No go. Did not work 
then finally, thanks to a blurb on planetdescent.com, I figure out that 
I have the Australian version of D3. So I DL the Australian 1.4 patch 
and it the update ran fine. I reload Kali and bingo, I'm back to getting 
squashed in multiplayer games.

One important point DigiJo left out was that you need to copy the server 
IP of where the online game is being used and copy it to the command 
line arguments like this -directip 123.45.67.2:2096 and then dbl click 
on the row to launch the game.




ZiggyPopp wrote:
> DigiJo wrote:
> 
> Thanks for all that info.
> 
> Once D3 starts, do I go into the multiplayer interface and, if so, which 
>  of the MP options do I select? IPX, Serial...
> Thanks
> 
>>
>>
>> hey ziggypopp,
>> its relativ simple to join a d3-server with kali.
>> first go to kali->internetgames, kali should show you the d3-servers
>> and running games there. (note d3: does not use a lobby system like d1
>> d2 did, the games you see there are permanent running dedicated
>> d3-servers)
>>
>> now right-klick on a server and go to "configure d3"
>>
>> the first section is "file name" this should point to your "main.exe"
>> from d3. for me it is:
>>
>> F:\d3\main.exe
>>
>> next section is the command parameters (CmdLnArgs). this line is added
>> to the launchcode and tells d3 what to do. for me it is this line:
>>
>> -nointro -framecap 0 -nomusic -nomotionblur -z32bit -nosparkles
>> -usesmoothing  -playermessages -nopentium3 -nocompress -directinput
>> -deadzone0 0.0 -pilot [NuB2]DigiJo
>>
>> all the parameters are explained in the d3-readme, you can just copy
>> this commands and at them to your kali. just change the pilotname
>> behind the -pilot command to exactly your pilotname. (if your
>> pilotname is Ziggypop, add -pilot Ziggypop)
>>
>> next box is the d3 mission folder, put in the path to your d3-missions
>> folder. for me it is:
>>
>> F:\d3\missions\
>>
>> last but not least, uncheck the checkbox "use kali nickname". if your
>> kali nickname is "Ziggy" d3 would try to find a pilot "Ziggy" and if
>> it doesnt find that pilot...
>>
>> ok that was it, 1 more thing. be sure to have the mission running on
>> the server in your d3/missions folder. if d3 doesnt find the level ,
>> it will crash if you try to join. the autodownload option only works
>> if you put in the server ip manuall, wich cant be done with kali. most
>> of the levels can be found at planetdescent.com
>>
>> got all that right? then start kali again, go to internet games ->d3,
>> rightcklick on a server -> connect and ahve fun down in the mines :)
>>
>> DigiJo
> 
>