🚀 go-pugleaf

  Well, I downloaded the new sound driver, off of the creative web site, and
that fixed the problem, didn't occur to me to update that one.... Thanks for
the help!

"Richard Moore" <richdmoore@earthlink.nospam.net> wrote in message
news:GX0Sb.1551$F23.109@newsread2.news.pas.earthlink.net...
>   Don't think that's it, it is sharing with usb and pci bus only, not any
> hard drive..... Also, I would think that the other C&C games, and other
> programs would have problems also, but they don't... I think it has
> something to do with accessing the CDROMs, as the intermittent blanking of
> sounds will occur after it is reading the CDroms from the DVD or CDRW
> Drive..... It may be how the video files are stored that my computer
doesn't
> like...
>
>   I have an oem soundblaster card.  I'll check the gateway site for an
> update.
>
>
>                  Sound Blaster Audigy Audio with IEEE 1394 Sound Card
>
>
>
>
>
> "Raymond Martineau" <bk039@freenet.carleton.ca> wrote in message
> news:kttg10134ifveersmmapdf314skfrud2ts@4ax.com...
> > On Thu, 29 Jan 2004 02:21:02 GMT, "Richard Moore"
> > <richdmoore@earthlink.nospam.net> wrote:
> >
> > >Tried all the acceleration settings in the sound menu in the windows
> control
> > >pannel, it made no difference.  I could not find any settings like that
> in
> > >the program itself.
> > > Any other ideas?
> > >
> >
> > In that case, you may ahve a hardware conflict of some sort.
> >
> > Open up "MSinfo32" (from the Run menu), and open the Conflicts/Sharing
> > entry under Hardware Resources.  If your audio card, video card, or
> > hard drive is charing a resource with another device (usually with the
> > other two items), then you are bound to enter some problem.
> >
> > Wouldn't be sure exactly how to fix a hardware conflict with plug and
> > play devices.  If you can, it might possible to remove and reinsert
> > the card in a different available slot (with a standard boot process
> > between), to force the computer to assign an unused hardware resource.
> >
> > Other than that, problems with Creative Labs soundcards are generally
> > hit-or-miss.  You can either work around it using the common methods,
> > or it won't fix at all - as a last resort, you might have to get a new
> > sound card.
> >
> >
>
>
>